Steel. Methods for determination of decarbonised layer depth
Сталь. Методы определения глубины обезуглероженного слоя
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard applies to wrought steels and establishes methods for determining the depth of the decarburized layer.
Стандарт распространяется на деформируемые стали и устанавливает методы определения глубины обезуглероженного слоя
Format: Electronic (pdf/doc)
Page Count: 24
Approved: Gosstandart of the USSR,
The Product is Contained in the Following Classifiers:
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.1 Ferrous metals »
ISO classifier »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National standards »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V09 Test methods. Packaging. Marking »
National Standards for OKSTU »
CAST IRON, FERRO ALLOYS, STEEL »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 1763-42: Metals. Method for determining the depth of decarburization of steel semi-finished products and parts by microanalysis
The Document References:
GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination
GOST 20560-81: Alloy and high-alloy steels. General requirements for methods of analysis
GOST 21014-88: Rolled products of ferrous metals. Surface defects. Terms and definitions
GOST 22536.1-77: Carbon steel and unalloyed cast iron. Methods for determining the content of total carbon and graphite
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 8711-78: Ammeters and voltmeters. General technical specifications
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9450-76: Measurements microhardness by diamond instruments indentation
The Document is Referenced By:
FTS ZhT TsT-TsV-TsL 062-2000: Rolling stock of railways. Springs cylindrical screw. Certification requirements
GOST 10234-77: Moderate strength flattened
GOST 10482-74: Saws for packing gang mills. Specifications
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 1071-81: Heat treated steel spring wire
GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel
GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel
GOST 11850-72: Steel wire for spring washers
GOST 1414-75: Construction steel with enhanced and high machinability
GOST 1435-74: Non-alloyed tool steel. Specification
GOST 1435-90: Unalloyed tool steel bars, strips and coils
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 1452-2003: Screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 1452-69: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Technical requirements
GOST 1452-86: Screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 14955-77: Quality round steel with a special surface finish
GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 14963-78: Doped steel spring wire
GOST 1577-81: Rolled sheets and wide strips of structural quality steel. Specifications
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 16118-70: Cylindrical helical compression (extension) springs made of round steel. Specifications
GOST 16135-70: Steel wire for calculating devices
GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 16556-2016: Ground connections for movable electric units. General specifications
GOST 16556-81: Grounding rods for mobile electrical equipment
GOST 17305-71: Wire of carbon construction steel. Specification
GOST 17305-91: Wire of carbon construction steel
GOST 1759-70: Bolts, screws, pins and nuts
GOST 19265-73: Bars and strips out of high-speed steel. Specifications
GOST 19277-2016: Seamless steel pipes, cold-deformed for oil and fuel pipelines. Specification
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 21022-75: Chromic steel for precise bearings. Specifications
GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.
GOST 21996-76: Cold-rolled heat treated steel-cord belt
GOST 21997-76: Steel flattened strip of high strength
GOST 2283-69: Steel cold rolled band from tool steel and spring steel
GOST 2283-79: Cold-rolled tape made of tool steel and spring steel
GOST 2284-79: Cold-rolled carbon structural steel strip
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 28393-89: PM bars and strips of high-speed steel. General specifications
GOST 30415-96: Steel. Non-destructive testing of mechanical properties and microstructure of steel products by magnetic method
GOST 3057-90: Disk springs. Specifications
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements
GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines
GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding
GOST 31373-2008: Wheelsets of locomotives and motor-powered units. Strength calculations and tests
GOST 32205-2013: Springs of spring suspensions of railway rolling stock. Scale of microstructure standards
GOST 33186-2014: Clamp of spring rod for mounting rails. Specifications
GOST 33189-2014: Transmission tooth gears of the traction railway stock. Scales of standards of macro- and microstructures
GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions
GOST 4041-71: Rolled plates of high quality structural steel for cold stamping
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 4543-71: Structural alloyed steel
GOST 4727-83: Bearing wire
GOST 5468-88: Needle wire
GOST 5524-75: Saws for vertical gang mills
GOST 5663-79: Carbon steel wire for cold upsetting
GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications
GOST 5950-73: Bars and strips from a toolhouse steel alloy
GOST 7918-75: Tool joints for 50 mm diameter drilling pipes. Specifications
GOST 800-78: Bearing tubes. Technical requirements
GOST 801-78: Bearing steel. Specifications
GOST 9389-75: Carbon steel spring wire
GOST 977-88: Steel castings. General specifications
GOST 980-80: Flat ring saws for wood sawing
GOST R 50566-93: Steel wire for mechanical springs. General requirements
GOST R 51245-99: Steel universal drill rods. General specifications
GOST R 51682-2000: Casing and coring tubes for geology-exploring drilling. Specifications
GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications
GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications
GOST R 53813-2010: Automobile engines. Connecting rods. Technical requirements and test methods
GOST R 54128-2010: Tractive railway rolling stock. Springs of spring suspensions
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R 56030-2014: Pipes for details of bearings. Technical specifications
GOST R 56299-2014: Rolled products from bearing steel. Specifications
GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control
GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure
GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements
GOST R ISO 22034-1-2013: Steel wire and wire products. Part 1. General test methods
MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life
OST 108.020.03-82: Stamped billets of turbine and compressor blades made of corrosion-resistant and heat-resistant steel. General Specifications. (2010 edition, including 3 amendments)
OST 108.129.01-79: Cylindrical helical extension springs for steam, gas turbines and compression machines. Specifications.
OST 26-07-262-77: Studs, bolts, screws, nuts for piping fittings. General technical requirements (restriction as per GOST 20700-75, GOST 1759-70, GOST 18126-72).
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 302-07-1152-92: Cylindrical helical compression springs. General specifications.
OST 32.156-2000: Spring bar terminals for fastening rails. Specifications (with Amendment No. 1)
OST 37.001.027-90: Cylindrical helical springs for vehicle suspension.
OST 4.054.035-78: Spring elements from alloys of ferrous and non-ferrous metals. Heat treatment. Typical Processes
PNST 13-2012: Nanostructured screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
PNST 14-2012: Machine nanostructured springs. Specifications
R 4.054.004-89: Details from alloys of ferrous and non-ferrous metals. Thermal and chemical-thermal treatment. Typical Processes
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel
ST CKBA 125-2020: Pipe fittings. Types of control and testing
ST SSFZhT TsT-TsV-TsL 084-2000: Rolling stock of railways. Springs cylindrical screw carriages. Typical test method.
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
Customers Who Viewed This Item Also Viewed:
Concrete with polysterene aggregates. Specifications
Steel welded vessels and apparatus. General technical conditions
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Billet of rotor shafts and rings of turbine generators
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Seismic building design code
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Noxious substances. Classification and general safety requirements
Safety valves of stream and hot-water boilers. Technical requirements
Steam and hot-water boilers
System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
Manufacturing and quality control of steel structures for construction
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Buildings and structures foundations
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.