GOST 12767-94
ГОСТ 12767-94
|
|
Reinforced concrete solid slabs for floors in lange-panel buildings. General specifications
Плиты перекрытий железобетонные сплошные для крупнопанельных зданий. Общие технические условия
Status: Not effective - Superseded. Information about the registration of 1710-st from 11/18/2016 (the official website of Rosstandart); IUS 4-2017
The standard applies to reinforced concrete slabs (hereinafter referred to as slabs) made from heavy concrete, structural lightweight concrete of dense structure and dense silicate concrete and intended to be used as a bearing part of the overlap of large-panel buildings of various purposes with a design floor load (without taking into account its own weight plates) up to 6.0 kPa incl. The standard does not apply to reinforced concrete slabs with protruding parts for the formation of balconies.
Стандарт распространяется на железобетонные сплошные плиты (далее - плиты), изготовляемые из тяжелого бетона, конструкционного легкого бетона плотной структуры и плотного силикатного бетона и предназначенные для использования их в качестве несущей части перекрытий кру��нопанельных зданий различного назначения с расчетной нагрузкой на перекрытие (без учета собственного веса плиты) до 6,0 кПа включ. Стандарт не распространяется на железобетонные плиты с выступающими частями для образования балконов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Construction of Russia,
5/18/1995
SKU: RUSS66614
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.30 Ceilings. The floors. Stairs »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.30 Ceilings. The floors. Stairs »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh33 Stone, brick, concrete and reinforced concrete structures and parts »
The Document is Replaced With:
GOST 12767-2016: Reinforced concrete solid slabs for floors in lange-panel buildings. General specifications
As a Replacement Of:
GOST 12767-80: Reinforced concrete solid panels for floor in residential and public buildings. Technical requirements
The Document References:
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 12767-80: Reinforced concrete solid panels for floor in residential and public buildings. Technical requirements
GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements
GOST 13015.1-81: Prefabricated concrete and reinforced concrete constructions and products. Acceptance
GOST 13015.2-81: Prefabricated concrete and reinforced concrete constructions and products. Marking
GOST 13015.3-81: Prefabricated concrete and reinforced concrete constructions and products. Quality certificate
GOST 13015.4-84: Prefabricated concrete and reinforced concrete costructions and products. Rules for transportation and storage
GOST 13840-68: Reinforced steel wire ropes 1x7
GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement
GOST 18105-86: Concretes. Rules for the strength control
GOST 21780-83: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 22362-77: Reinforced concrete structures. Methods for determination of reinforcement tensioning force
GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement
GOST 25214-82: Dense silicate concrete. Technical requirements
GOST 25697-83: Reinforced concrete slabs for balconies and loggias. General specifications
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 25820-83: Lightweight concrete. Specifications
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 28984-91: Modular size coordination in building engineering. Basic rules
GOST 30247.0-94: Elements of building constructions. Fire-resistance test methods. General requirements
GOST 30247.1-94: Elements of building constructions. Fire-resistance test methods. Load bearing and separating constructions
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
The Document is Referenced By:
GOST 24210-80: Soft and tile materials for floor covering. Procedure for determining sound-insulation properties
GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications
R 78.36.032-2013: Engineering and technical fortification and equipment with technical means of protection of objects, apartments and MHIG, taken under centralized protection units of private security. Part 1
R 78.36.032-2014: Engineering and technical fortification and equipment with technical means of protection of objects, apartments and MHIG, taken under centralized protection units of private security. Part 2. Apartments and MHIG
R 78.36.035-2013: Recommendations for the organization of a comprehensive centralized protection of banking self-service devices
RD 78.36.003-2002/MVD Rossii: Engineering and technical strength. Security equipment. Requirements and design standards for the protection of objects from criminal attacks
RD 78.36.006-2005: Choice and application of hardware of security and alarm systems and engineering safety measures for development of facilities
SP 76.13330.2016: Electrical systems
SP 95.13330.2016: Concrete and reinforced concrete structures made of dense calcium-silicate concrete
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.