GOST 20522-2012
ГОСТ 20522-2012
|
|
Soils. Methods of statistical treatment of test results
Грунты. Методы статистической обработки результатов испытаний
Status: Valid - Supersedes
The standard establishes the methods of statistical processing of soil test results that constitute various soil objects (foundations of structures, massifs containing underground structures, structures of soil, slopes, etc.) used in engineering-geological surveys, design and construction. The requirements of the standard do not apply to the parameters of strength and deformability of soils under dynamic effects, as well as the characteristics of coarse-grained soils obtained using modeling of particle size composition.
Стандарт устанавливает применяемые при инженерно-геологических изысканиях, проектировании и строительстве методы статистической обработки результатов испытаний грунтов, составляющих различные грунтовые объекты (основания сооружений, массивы, вмещающие подземные сооружения, сооружения из грунта, склоны и т. д.). Требования стандарта не распространяются на параметры прочности и деформируемости грунтов при динамических воздействиях, а также на характеристики крупнообломочных грунтов, получаемые с применением моделирования гранулометрических составов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/29/2012
SKU: RUSS66645
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.50 Foundations and foundations of buildings and structures »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
I Environmental-legal and economic-legal mechanisms for environmental protection »
1 Management infield of environmental protection and environmental management »
1.5 Environmental monitoring and control »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.080 The quality of soil. Soil science »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.080 The quality of soil. Soil science »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.080 The quality of soil. Soil science »
13.080.01 Soil quality and soil science in general »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.080 The quality of soil. Soil science »
13.080.01 Soil quality and soil science in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh39 Test methods. Packaging. Marking »
As a Replacement Of:
GOST 20522-96: Soils. Statistical treatment of the test results
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation
GOST 12248-2010: Soils. Laboratory methods for determining the strength and strain characteristics
GOST 20522-96: Soils. Statistical treatment of the test results
GOST 25100-2011: Soils. Classification
GOST 25100-95: Soils. Classification
The Document is Referenced By:
Amendment 5: Amendment to SP 20.13330.2016 SNiP 2.01.07-85* Loads and impacts
Amendment 5: Amendment to SP 22.13330.2016 SNiP 2.02.01-83* Foundations of Buildings and Structures
Amendment 5: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
GOST 21.702-2013: System of building design documents. Rules of executing of working documentation for railways
GOST 30416-2012: Soils. Laboratory testing. General requirements
GOST 30672-2012: Soils. Field testing. General
GOST 32868-2014: Public roads. Requirements for engineering and geological surveys
GOST 33179-2014: Automobile roads of general use. Survey of bridges and viaducts. General requirements
GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
GOST R 55945-2014: General requirements to the engineering geological survey and studies for preservation of cultural heritage objects
GOST R 70697-2023: Soils. Determination of the strength characteristics of rocky soils by triaxial compression
ODM 218.2.030-2013: Guidelines for evaluating landslide hazard on highways
ODM 218.2.049-2015: Recommendations for the design and construction of gabion structures on highways
ODM 218.2.051-2015: Recommendations for the design and design of anti-tailing structures on highways
ODM 218.2.053-2015: Recommendations for seismic impact assessment in determining the sustainability of landslide sections of roads
ODM 218.2.068-2016: Recommendations on accounting for dynamic effects from modern vehicles when calculating the strength, stability and deformability of the road bed
ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads
ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads
ODM 218.3.059-2015: Guidelines for the use of electromagnetic devices for the operational control of the quality of soil compaction
ODM 218.3.083-2016: Guidelines for trenchless laying of road culvert pipes
ODM 218.3.103-2018: Recommendations for the use of screw piles on roads
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
PNST 762-2022: Security in emergency situations. Safe City. Typical predictive analytical model using the Bayesian method. General requirements
PNST 765-2022: Security in emergency situations. Safe City. Flood forecasting. General requirements
PNST 802-2022: Soils. Drilling sounding method
PNST 803-2022: Soils. Method for measuring lateral pressure with a flat dilatometer
RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg
SP 151.13330.2012: Engineering site investigations for nuclear power plants construction
SP 22.13330.2016: Soil bases of buildings and structures
SP 23.13330.2011: Foundation of hydraulic structures
SP 23.13330.2018: Foundations of hydraulic structures
SP 24.13330.2011: Pile foundations
SP 248.1325800.2016: Underground structures. Design rules
SP 248.1325800.2023: Underground structures. Design rules
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 25.13330.2020: Bases and foundations on permafrost soil SNiP 2.02.04-88
SP 283.1325800.2016: High critical building objects. Rules of seismic microzonation
SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction
SP 32-104-98: Design of earthwork for railways with 1520 mm track
SP 342.1325800.2017: Protection of railway track and structures from the adverse natural phenomena. Rules of engineering and construction
SP 361.1325800.2017: Buildings and constructions. Protective measures in the zone of influence of construction of underground objects
SP 369.1325800.2017: Fixed offshore platforms. Design principles
SP 381.1325800.2018: Retaining structures. Design rules
SP 39.13330.2012: Rock fill dams
SP 420.1325800.2018: Engineering surveys for construction in areas of landslide development. General requirements
SP 446.1325800.2019: Engineering and geological surveys for construction. General rules for the production of work
SP 448.1325800.2019: Engineering surveys for construction in areas of subsidence. General requirements
SP 449.1326000.2019: Engineering surveys for construction in areas of swelling soil distribution. General requirements
SP 47.13330.2012: Engineering survey for construction. Basic principles
SP 47.13330.2016: Engineering survey for construction. Basic principles
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Additive АКОР-1. Specifications
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.