GOST 30683-2000
ГОСТ 30683-2000
|
|
Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections
Шум машин. Измерение уровней звукового давления излучения на рабочем месте и в других контрольных точках. Метод с коррекциями на акустические условия
Status: Not effective - Superseded. Information about the registration of 45-st from 02/09/2017 (the official website of Rosstandart); IUS 7-2017
This standard applies to stationary, moving and portable machines, mechanisms and other equipment operating indoors or outside and which are sources of noise in the air environment, classified according to GOST 12.1.003, and establishes a method for measuring emission sound pressure levels at directly at the machine, in its cabin, behind a partial or full sound barrier (in the enclosure), and at other control points in any test space that satisfies Standard anovlennym its requirements
Настоящий стандарт распространяется на стационарные, передвигающиеся и переносные машины, механизмы и другое оборудование, эксплуатируемые в помещении или вне его и являющиеся источниками шума в воздушной среде, классифицируемого по ГОСТ 12.1.003, и устанавливает метод измерения уровней звукового давления излучения на рабочем месте, расположенном непосредственно у машины, в ее кабине, за частичным или полным звукозащитным ограждением (в выгородке), и в других контрольных точках в любом испытательном пространстве, которое удовлетворяет установленным к нему стандартом требованиям
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
4/3/2002
SKU: RUSS66712
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
5 Protection against mechanical vibrations »
5.2 Acoustic noise »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.1 Motor vehicles and equipment »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.20 Noise from machinery and equipment »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.20 Noise from machinery and equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T3 Physics and Mechanics »
T34 Oscillatory and wave-like movements. Bodies vibration. Sound. Acoustics »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Applied statistics. Methods for statistical control of quality, reliability, durability. General methods of control and testing of products »
The Document is Replaced With:
GOST ISO 11204-2016: Machine noise. Determination of sound pressure levels in the workplace and at other control points with precise corrections to the properties of the test space
The Document References:
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.025-81: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in reverberation room. Precision method
GOST 12.1.026-80: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in a free-field over reflecting plane. Engineering method
GOST 12.1.028-80: System of the standards for safety of work
GOST 17168-82: Octave and one-third-of-octave electronic filters
GOST 17187-81: Noise meters
GOST 30720-2001: Noise of machines. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
The Document is Referenced By:
GOST 12.1.003-2014: Occupational safety standards system. Noise. General safety requirements
GOST 23941-2002: Noise of machines. Methods for determination of noise characteristics. General requirements
GOST 30720-2001: Noise of machines. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
GOST 31169-2003: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ
GOST 31171-2003: Noise of machines. Guidelines for the selection of method for the determination of emission sound pressure levels at a work station and at other specified positions
GOST 31172-2003: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Engineering method in an essentially free field over a reflecting plane
GOST 31298.1-2005: Noise of machines. Determination of sound insulation performances of enclosures. Part 1. Measurements under laboratory conditions for declaration of noise performans values
GOST 31298.2-2005: Noise of machines. Determination of sound insulation performances of enclosures. Part 2. Measurements in situ for acceptance and verification of declared noise performance values
GOST 31337-2006: Noise of machines. Hand-held non-electric power tools. Engineering method for the measurement of noise
GOST 31425.1-2010: Machine noise Procedure of tests for the noise of textile machines. Part 1 General requirements
GOST 31545-2012: Production equipment for foundry. Noise characterictics and methods of their control
GOST 33604-2015: Machines and the equipment polygraphic, paper surfacing and papermaking. Methods for determination of noise characteristics. Accuracy grades 2 and 3
GOST 33972.5-2016: Test code for machine tools. Part 5. Determination of the noise emission
GOST EN 12001-2012: Conveying, spraying and placing machines for concrete and mortar. Safety requirements
GOST EN 1218-1-2013: Safety of woodworking machines. Tenoning machines. Part 1. Single end tenoning machines with sliding table
GOST EN 1218-2-2014: Safety of woodworking machines. Tenon cutting machines. Part 2. Machines for bilateral tendon cutting and / or profiling with chain conveyor feed
GOST EN 12415-2006: Safety of metal-working machine tools. Numerically controlled turning machines and turning centres
GOST EN 12417-2006: Safety of metal-working machine tools. Machining centres
GOST EN 12417-2016: Safety of machine tools. Sicherheit. Machining centres
GOST EN 12478-2006: Safety of machine tools. Large numerically controlled turning machines and large turning centres
GOST EN 12717-2011: Safety of machine tools. Drilling machines
GOST EN 12840-2011: Safety of machine tools. Manually controlled turning machines with or without automatic control
GOST EN 13128-2006: Safety of metal-working machine tools. Milling machines (including boring machines)
GOST EN 13128-2016: Safety of metalworking machines. Milling machines (including boring)
GOST EN 13218-2011: Safety of machine-tools. Stationary grinding machines
GOST EN 13525-2012: Forestry machinery. Wood chippers. Safety
GOST EN 13886-2013: Food processing machinery. Cooking kettles equipped with powered stirrer or mixer. Safety and hygiene requirements
GOST EN 13898-2011: Safety of machine tools. Sawing machines for metal cold cutting
GOST EN 13954-2013: Food processing machinery. Bread slices. Safety and hygiene requirements
GOST EN 15166-2013: Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements
GOST EN 15774-2013: Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements
GOST EN 71-1-2014: Toys. Safety requirements. Part 1. Mechanical and physical properties
GOST EN 848-2-2013: Safety of woodworking machines. One side milling machines. Part 2. Single spindle milling machines with vertical upper arrangement of spindle
GOST ISO 11205-2006: Noise emitted by machinery. Determination of emission sound pressure levels at the work station and at other specified positions using sound intensity. Engineering method
GOST ISO 230-5-2002: Test code for machine tools. Part 5. Determination of the noise emission
GOST ISO 4254-1-2013: Agricultural machines. Safety requirements. Part 1 General requirements
GOST R 52797.1-2007: Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 1. Noise control strategies
GOST R 52797.3-2007: Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 3. Sound propagation and noise prediction in workrooms
GOST R 52990.1-2008: Noise of machines. Textile machinery. Noise test code. Part 1. Common requirements
GOST R 52990.2-2010: Noise of machines. Textile machinery. Noise test code. Part 2. Spinning preparatory and spinning machinery
GOST R 52990.3-2010: Noise of machines. Textile machinery. Noise test code. Part 3. Nonwoven machinery
GOST R 52990.4-2010: Noise of machines. Textile machinery. Noise test code. Part 4. Yarn processing, cordage and rope manufacturing machinery
GOST R 52990.5-2010: Noise of machines. Textile machinery. Noise test code. Part 5. Weaving and knitting preparatory machinery
GOST R 52990.6-2010: Noise of machines. Textile machinery. Noise test code. Part 6. Fabric manufacturing machinery
GOST R 52990.7-2010: Noise of machines. Textile machinery. Noise test code. Part 7. Dyeing and finishing machinery and equipment
GOST R 53028-2008: Technological foundry equipment. Noise characteristics and methods of control
GOST R 53479-2009: Printing trades equipment. Methods for determination of noise emission dates. Accuracy grades 2 and 3
GOST R 54418.11-2012: Renewable power engineering. Wind power engineering. Wind turbines. Part 11. Acoustic noise measurement techniques
GOST R 54418.11-2017: Renewable power engineering. Wind power engineering. Wind turbines. Part 11. Methods for determination of acoustic noise characteristics
GOST R 54431-2011: Metal-working machines. General safety requirements
GOST R 54967-2012: Food processing machinery and equipment. Сutters. Safety and hygiene requirements
GOST R 54969-2012: Food processing machinery and equipment. Equipment for pasta pressing. Safety and hygiene requirements
GOST R 54971-2012: Food processing machinery. Spreaders, stripping and cutting machines, stick return conveyors, stick magazines. Safety and hygiene requirements
GOST R EN 12717-2006: Safety of machine tools. Drilling machines
GOST R EN 12750-2012: Safety of woodworking machines. Four sided planning (longitudinal and milling) machines
GOST R EN 12840-2006: Safety of machine-tools. Manually controlled turning machines with or without automatic control
GOST R EN 13218-2006: Safety of machine-tools. Stationary grinding machines
GOST R EN 13788-2007: Safety of metal-working machine tools. Multi-spindle automatic turning machines
GOST R EN 13898-2009: Machine tools. Safety. Sawing machines for metal cold cutting
GOST R EN 1870-1-2011: Safety of woodworking machines. Circular sawing machines. Part 1. Circular multipurpose saw benches (with and without sliding table), circular dimension saw and circular building site saws
GOST R EN 848-1-2011: Safety of woodworking machines. One side milling machines. Part 1. Single spindle milling machines with vertical lower arrangement of spindle
GOST R EN 859-2010: Safety of woodworking machines. Hand fed surface planning machines
GOST R EN 860-2010: Safety of woodworking machines. Outside thickness planning machines
GOST R EN 861-2011: Safety of woodworking machines. Surface planning and thickening machines
GOST R ISO 23125-2012: Safety of machine tools. Turning machines
Letter 10142/07-AS: On the application of standards
SP 254.1325800.2016: Buildings and territories. Rules for designing of industrial sound protection
STB EN 12855-2008: Equipment for foodstuffs processing. Cutters with rotating bowl. Safety and Health Requirements
STB EN 1870-10-2007: Safety of woodworking machines. Radial saw machines. Part 10. Automatic and semiautomatic rising blade machines
STB EN 1870-11-2007: Safety of woodworking machines. Radial saw machines. Part 11. Automatic and semiautomatic horizontal cross-cutting rising blade machines, (radial arm-sawing machines)
STB EN 1870-12-2007: Safety of woodworking machines. Radial saw machines. Part 12. Pendulum cross-cutting rising blade machines
STB EN 1870-15-2007: Safety of woodworking machines. Radial saw machines. Part 15. Multi blade cross-cutting machines with motorized and manual loading and/or unloading
STB EN 1870-16-2007: Safety of woodworking machines. Radial saw machines. Part 16. Bilateral miter machines for V-shaped cutting
STB EN 1870-2-2006: Safety of woodworking machines. Circular sawing machines. Part 2. Horizontal and vertical machines for slabs cutting
STB EN 1870-3-2006: Safety of woodworking machines. Circular sawing machines. Part 3. Machines for cutoff turning from above and machines of combined types
STB EN 1870-4-2006: Safety of woodworking machines. Circular sawing machines. Part 4. Multishelf machines for longitudinal cutting with manual loading and/or unloading
STB EN 1870-5-2006: Safety of woodworking machines. Circular sawing machines. Part 5. Combined machines for circular processing and trimming from the bottom
STB EN 1870-6-2006: Safety of woodworking machines. Circular sawing machines. Part 6. Frame saws and combined frame saws, table circular sawing machines with manual loading and/ or unloading
STB EN 1870-7-2006: Safety of woodworking machines. Circular sawing machines. Part 7. Bolter machines with mechanical delivery of motorized table with manual loading and/ or unloading
STB EN 1870-8-2006: Safety of woodworking machines. Circular sawing machines. Part 8. Edging and deal-frame machines with motorized sawing unit and with manual loading and/ or unloading
STB EN 1870-9-2007: Safety of woodworking machines. Circular sawing machines. Part 9. Bilateral mitering machines with mechanical delivery and with manual loading and/ or unloading
STB EN 848-2-2004: Safety of woodworking machines. Continuous milling machines for single-end processing by rotating machine. Part 2. Single spindle milling machines with upper location of spindle and manual/ driven feed
STB EN 848-3-2004: Safety of woodworking machines. Continuous milling machines for single-end processing by rotating machine. Part 3. Drilling and milling machines with numeric programming control
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.