GOST 31167-2009
ГОСТ 31167-2009
|
|
Buildings and structures. Methods for determination of air permeability of building envelopes in field conditions
Здания и сооружения. Методы определения воздухопроницаемости ограждающих конструкций в натурных условиях
Status: Effective
This standard applies to enclosing structures of premises, including apartments, groups of premises of residential, public, administrative, domestic, agricultural, auxiliary buildings and structures, as well as buildings in general, and establishes methods for determining the air permeability of enclosures in natural conditions. The standard does not apply to fences with openings on condition of technology.
Настоящий стандарт распространяется на ограждающие конструкции помещений, в том числе, квартир, групп помещений жилых, общественных, административных, бытовых, сельскохозяйственных, вспомогательных зданий и сооружений, а также зданий в целом и устанавливает методы определения воздухопроницаемости ограждений в натурных условиях. Стандарт не распространяется на ограждения с открытыми по условию технологии проемами
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/10/2010
SKU: RUSS66718
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.01 Construction in general »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.01 Construction in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh39 Test methods. Packaging. Marking »
National Standards for OKSTU »
SANITARY EQUIPMENT (EXCEPT VENTILATION AND AIR CONDITIONING EQUIPMENT), LOCKING AND FIXING PRODUCTS »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 31167-2003: Buildings and structures. Methods for determination of air permeability of building envelope in field conditions
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation
GOST 10921-90: Radial and axial fans. Aerodynamic testing methods
GOST 112-78: Meteorological glass thermometers
GOST 11442-90: General-purpose axial fans
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements
GOST 18140-84: SSI differential pressure gauges. General specifications.
GOST 27925-88: Performances and construction of electric circulating fans and regulators
GOST 30494-96: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 31167-2003: Buildings and structures. Methods for determination of air permeability of building envelope in field conditions
GOST 6359-75: Meteorological barographs of aneroid type. Specifications
GOST 6376-74: Hand anemometer accounting device. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods
SanPiN 2.1.2.1002-00: Sanitation and Disease Control Requirements for Residential Occupancies and Spaces
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
SNiP 23-02-2003: Buildings Heat Insulation
The Document is Referenced By:
GOST 30971-2012: Erection to joints of window assemblies adjoined to wall openings. General specifications
GOST 31168-2014: Houses. Method for determination of specific heat consumption for building heating
GOST 33125-2014: Sun shading devices. Specifications
GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions
GOST R 54852-2011: Buildings and structures. Method of thermovision control of enclosing structures thermal insulation quality
GOST R 54853-2011: Bulidings and structures. Method for determination of thermal resistance and thermal coefficient of enclosing structures with assistance of heat flow meter
GOST R 56623-2015: Non-destructive testing. Methods of determination of thermal resistance of enclosing structures
GOST R 58774-2019: The external walls are frame-sheathed self-supporting and non-bearing with a frame made of cold-rolled steel galvanized profiles. General specifications
GOST R 59972-2021: Ventilation and air conditioning systems for public buildings. Technical requirements
GOST R 70266-2022: Transparent enclosing structures. Sealing of joints to load-bearing structures and wall openings. Rules and control of work performance
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Resolution 1062-PP: Energy efficiency of residential and public buildings. Standards for energy consumption and thermal protection
RMD 23-16-2019 St. Petersburg: Recommendations for energy efficiency of residential and public buildings
R-SSK 03-2016: Recommendations. Assessment of energy efficiency of buildings. Calculation and experimental control of standardized energy performance of buildings
SP 345.1325800.2017: Residential and public buildings. Thermal performance design
SP 352.1325800.2017: Single-family houses with wooden frame. Rules of design and construction
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
ST-NP SRO SSK-02-2013: Evaluation of the energy performance of buildings. Monitoring compliance with the requirements of thermal protection of external building envelopes
STO SSK 02-2016: Assessment of the energy efficiency of buildings during construction. Monitoring compliance with the requirements of thermal protection of external building envelopes and specific annual consumption of thermal energy
TSN 23-310-2016 BelO: Energy efficiency in residential and public buildings. Design and control standards
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
