GOST R 12.0.010-2009
ГОСТ Р 12.0.010-2009
|
|
Occupational safety standards system. Occupational safety and health management systems. Hazard and risks identification and estimation of risks
Система стандартов безопасности труда. Системы управления охраной труда. Определение опасностей и оценка рисков
Status: Effective - Introduced for the first time
This standard establishes the rules and methods for assessing the risks associated with damage to the health and life of an employee in the course of his employment, and can be used at various levels - national, in the industry and industry, in the organization and in the individual workplace. This standard is used in order to: - ensure the constitutional right of an employee to work in conditions that meet safety and hygiene requirements [1, article 37, clause 3]; - obtaining data (on hazards and risks) to inform workers about the risk of damaging health [2, article 212]; - justification of the social protection of workers, including compensation for work in hazardous and (or) dangerous working conditions; - evaluating the effectiveness of measures to improve labor protection; - taking preventive measures to protect the health of the employee; - clarification of the causal relationship between the health status of workers and working conditions; - justification of the provisions of the employment contract on the obligations of the employer to provide the employee with the necessary personal protective equipment, the establishment of an appropriate mode of work and rest, as well as to ensure other guarantees and compensations provided for by law. This standard can be applied by expert and insurance organizations to justify the size of insurance tariffs.
Настоящий стандарт устанавливает правила и методы оценки рисков, связанных с ущербом здоровью и жизни работника в процессе его трудовой деятельности, и может быть использован на различных уровнях - национальном, в отрасли экономики и промышленности, в организации и на отдельном рабочем месте. Настоящий стандарт применяют в целях: - обеспечения конституционного права работника на труд в условиях, отвечающих требованиям безопасности и гигиены [1, статья 37, пункт 3]; - получения данных (об опасностях и рисках) для информирования работников о риске повреждения здоровья [2, статья 212]; - обоснования положенной социальной защиты работников, в том числе компенсаций за работу во вредных и (или) опасных условиях труда; - оценивания эффективности мер по совершенствованию охраны труда; - принятия превентивных мер по защите здоровья работника; - выяснения причинно-следственной связи состояния здоровья работников с условиями труда; - обоснования положений трудового договора об обязательствах ра��отодателя по обеспечению работника необходимыми средствами индивидуальной защиты, установлению соответствующего режима труда и отдыха, а также по обеспечению других предусмотренных законодательством гарантий и компенсаций. Настоящий стандарт может быть применен экспертными и страховыми организациями для обоснования размера страховых тарифов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/10/2009
SKU: RUSS66827
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
I Legal and organizational basis of labor protection »
3 Organization of labor protection at enterprise »
3.3 Special assessment of working conditions »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.100 Safety of professional activity. Industrial hygiene »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.100 Safety of professional activity. Industrial hygiene »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
The Document References:
Code 197-FZ: Labor Code of the Russian Federation
Federal Law 184-FZ: About technical regulation
Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being
GOST 12.0.003-74: Dangerous and harmful production effects. Classification
GOST 12.0.230-2007: Occupational safety standards system. Occupational safety and health management systems. General requirements
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 12.0.007-2009: Occupational safety standards system. Labour protection management systems in organizations. Guidelines requirements on development, implementation, audit and improvement
GOST R 51898-2002: Safety aspects. Guidelines for their inclusion in standards
GOST R ISO 12100-1-2007: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terminology, methodology
R 2.2.1766-03: Guidelines on occupational risk assessment for workers' health. Organizational and methodological aspects, principles and criteria
R 2.2.2006-05: Guide on Hygienic Assessment of Factors of Working Environment and Work Load. Criteria and Classification of Working Conditions
The Document is Referenced By:
GOST R 12.0.011-2017: Occupational safety standards system. Methods for assessment and calculation risks of railway employees
GOST R 55619-2013: Renewable power engineering. Wind turbines. Protective measures. Requirements for design, operation and maintenance
GOST R 58137-2018: Automobile roads of general use. Guidelines for risk assessment during the life cycle
GOST R 58215-2018: Oil and gas industry. Arctic operations. Work environment
GOST R 70073-2022: Public roads. Bridges and road pipes. Methods for determining geometric and physical parameters
GOST R 70474-2023: Motor vehicles. Cargo transportation safety. Fastening belts. Technical requirements and test methods
GOST R 70475-2022: Automobile vehicles. Cargo transportation safety. Fastening chains. Technical requirements and test methods
GOST R 70476-2022: Automobile vehicles. Cargo transportation safety. Fastening ropes. Technical requirements and test methods
MDS 12-55.2010: The order of operation of the sectoral subsystem DSSOT for certification of labor protection management systems of construction organizations
PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters
PNST 676-2022: Oil and gas industry. Underwater production systems. Production environment
PNST 761-2023: Security in emergency situations. Safe City. Terms and definitions
SP 79.13330.2012: Bridges and culverts. Rules of examination and test
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
