GOST R 51317.4.16-2000
ГОСТ Р 51317.4.16-2000
|
|
Electromagnetic compatibility of technical equipment. Immunity to conducted disturbances in the frequency range 0 Hz to 150 kHz. Requirement and test methods
Совместимость технических средств электромагнитная. Устойчивость к кондуктивным помехам в полосе частот от 0 до 150 кГц. Требования и методы испытаний
Status: Effective - Introduced for the first time
The standard establishes the requirements and test methods for electrical, electronic and electronic products and equipment for resistance to conductive electromagnetic interference, which are common asymmetric voltages in the frequency range from 0 to 150 kHz, similar to those arising from the flow of electric current in power cables located nearby technical means, leakage currents in grounding systems, as well as a common basis for assessing the stability of the vehicle under the influence of conducted interference yes to power, alarm, control and communication ports. The standard applies to vehicles connected to low-voltage distribution electric networks and industrial electric networks at a frequency of 50 Hz supply voltage.
Стандарт устанавливает требования и методы испытаний электротехнических, электронных и радиоэлектронных изделий и оборудования на устойчивость к кондуктивным электромагнитным помехам, представляющим собой общие несимметричные напряжения, в полосе частот от 0 до 150 кГц, подобные тем, которые возникают при протекании электрического тока в силовых кабелях, расположенных поблизости от технических средств, итоков утечки в системах заземления, а также общую основу для оценки устойчивости ТС при воздействии кондуктивных помех указанного вида на порты электропитания, сигнализации, управления и связи. Стандарт распространяется на ТС, подключаемые к низковольтным распределительным электрическим сетям и промышленным электрическим сетям при частоте питающего напряжения 50 Гц.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
12/1/2000
SKU: RUSS66861
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
33 Telecommunications. Audio and Video »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
020/2011 TR CU. Electromagnetic compatibility of technical means »
Regulations and standards (to ТР ТС ТС 020/2011) »
ISO classifier »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
National standards »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
ISO classifier »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
33.100.01 Electromagnetic compatibility in general »
National standards »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
33.100.01 Electromagnetic compatibility in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Electronic engineering, electronics and communications »
E0 General rules and regulations for electronic engineering, electronics and communications »
E02 Design and calculation norms »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Integrated systems of general technical requirements (CCOTT) and quality control (CCKK) »
The Document References:
GOST 30372-95: Electromagnetic compatibility of electronic equipment. Terms and definitions
GOST R 50397-92: Electromagnetic compatibility for electronic equipment. Terms and definitions
GOST R 51317.2.5-2000: Electromagnetic compatibility of technical equipment. Electromagnetic environment. Classification of electromagnetic disturbances for different locations of technical equipment
GOST R 51317.3.8-99: Electromagnetic compatibility of technical equipment. Signalling on low-voltage electrical installations. Emission levels, frequency bands and electromagnetic disturbance levels
GOST R 51317.4.6-99: Electomagnetic compatibility of technical equipment. Immunity to conducted disturbance induced by radio-frequency fields. Requirements and test methods
GOST R 51317.6.1-2006: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in residential, commercial and light-industrial environments. Requiremеnts and test methods
GOST R 51317.6.1-99: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in residential, commercial and light-industry environments. Requirements and test methods
GOST R 51317.6.2-99: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in industry environments. Requirements and test methods
GOST R 51318.22-2006: Electromagnetic compatibility of technical equipment. Information technology equipment. Man-made radio disturbance. Limits and methods of measurement
GOST R 51318.22-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance from information technology equipment. Limits and test methods
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
RD 50-713-92: Electromagnetic compatibility of hardware components. Electromagnetic environment. Types of low-frequency conducted interference and signals transmitted over power lines in general-purpose power supply networks
RD 50-714-92: Guidelines. Electromagnetic compatibility of technical equipment. Electromagnetic environment. Electromagnetic compatibility levels in low-voltage general-purpose power supply systems in terms of low-frequency conducted noise and power line signals
The Document is Referenced By:
GOST 32137-2013: Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
GOST 32783-2014: Inductive - wire sensors. Safety requirements and methods of control
GOST 33397-2015: Railway telecommunications. General safety requirements
GOST 33436.4-2-2015: Electromagnetic compatibility of technical equipment. Railway systems and equipment. Part 4-2. Emission and immunity of telecommunication equipment. Requirements and test methods
GOST 34014-2016: Railway telecommunication. Operational telecommunication network. Technical requirements and methods of control
GOST IEC 61000-6-7-2019: Electromagnetic compatibility (EMC). Part 6-7. General standards. Immunity requirements for equipment designed to perform functions in a safety-related system (functional safety) in industrial locations
GOST R 50656-2001: Electromagnetic compatibility of technical equipment. Technical equipment for railway control systems. Requirements and test methods
GOST R 51317.1.2-2007: Electromagnetic compatibility of technical еquipment. Methodology for the achievement of the functional safety of technical equipment with regard to electromagnetic disturbance
GOST R 51317.4.1-2000: Electromagnetic compatibility of technical equipment. Immunity tests. Test procedures.
GOST R 51317.6.5-2006: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in power stations and substations. Requirements and test methods
GOST R 51329-2013: Electromagnetic compatibility of technical equipment. Residual current-operated protective devices (RCDs) for household and similar use. Requirements and test methods
GOST R 52259-2004: Electronic sealing devices. General technical requirements
GOST R 54957-2012: Railway telecommunications. General safety requirements
GOST R 55176.4.2-2012: Electromagnetic compatibility of technical equipment. Railway systems and equipment. Part 4-2. Emission and immunity of telecommunication equipment. Requirements and test methods
GOST R 55813-2013: Railway telecommunication. Operational Telecommunication Network. Technical specification and methods of control
GOST R 55882.1-2013: Electric equipment for rolling stock. Part 1. General service conditions and general rules
GOST R 58092.5.1-2018: Electric energy storage (ESS) systems. Safety considerations for grid-integrated EES systems. General requirements
GOST R 58176-2018: Electric industry. Energy construction. Organisation of commissioning of thermal power plants. General requirements
GOST R 59726-2021: Complete transformer and mast transformer substations and complete distribution stations for electric power supply to non-traffic railway consumers. General specifications
GOST R 70451-2022: Unified energy system and isolated power systems. Electrical substations. Automated control systems of technological processes. Conditions for creation. Norms and requirements.
GOST R 71160-2023: Oil and gas industry. Design and operation of subsea production systems. Part 6. Subsea production control systems
GOST R IEC 61850-3-2005: Communication networks and systems in substations. Part 3. General requirements
GOST R IEC 62274-2013: Medical electrical equipment. Safety of radiotherapy record and verify systems
Letter 15153/05-DG: About the application of the standards
NB ZhT TsSh 129-2003: The system of controlling sections of the track by the axle counting method. Safety standards
Protocol 03-14-PR: Meeting of the Working Group on making decisions on the possibility of using national and interstate standards developed on the basis of (instead of) previously valid, to ensure the activities of the Federal Accreditation Service (Rosakkreditatsiya) on accreditation and competence verification of accredited persons of April 29, 2022 N 03-14-pr
SO 34.35.311-2004: Guidelines for Determining Electromagnetic Environment and Compatibility at Power Stations and Substations
STO 1.1.1.07.001.0675-2008: Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
