GOST R 53664-2009
ГОСТ Р 53664-2009
|
|
High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications
Болты высокопрочные цилиндрические и конические для мостостроения, гайки и шайбы к ним. Технические условия
Status: Effective - Introduced for the first time
This standard applies to high-strength hexagon-head cylindrical bolts and conical round-head bolts, high-strength hexagonal nuts with increased turn-key size and washers to high-strength bolts designed for use in metal structures of bridges constructed and operated in macro-climatic areas with moderate (U) and cold (CL) climate with a design temperature of minus 40 ° C and minus 60 ° C, respectively, of placement category 1 according to GOST 15150
Настоящий стандарт распространяется на высокопрочные цилиндрические болты с шестигранной головкой и конические болты с полукруглой головкой, высокопрочные шестигранные гайки с увеличенным размером под ключ и шайбы к высокопрочным болтам, предназначенные для использования в металлических конструкциях мостов, сооружаемых и эксплуатируемых в макроклиматических районах с умеренным (У) и холодным (ХЛ) климатом с расчетной температурой до минус 40 °С и минус 60 °С соответственно категории размещения 1 по ГОСТ 15150
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/15/2009
SKU: RUSS66951
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
K.32 Transport facilities »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.6 Metal products »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.01 Fasteners in general »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.01 Fasteners in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh8 Road, bridge and railway construction »
Zh82 Bridge Construction »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10541-78: Automobile motor oils for carburetor engines
GOST 11860-85: Blind nuts, product grade A. Construction and dimensions
GOST 12414-94: Ends of bolts, screws and studs. Sizes
GOST 1497-84: Metals. Methods of tension test
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation
GOST 1759.2-82: Bolts, screws, and studs. Surface imperfections and monitoring methods
GOST 1759.3-83: Nuts. Surface defects and methods of control
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 17769-83: Fastening details. Rules of acceptance
GOST 18123-82: Washers
GOST 18160-72: Fasteners. Packing. Marking. Transportation and storage
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 27148-86: Fasteners. Screw thread run-out. Washout threads, total thread run-outs and intercuts. Dimensions
GOST 4543-71: Structural alloyed steel
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 8233-56: Steel. Microstructure standards
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
GOST 9378-93: Roughness comparison specimens
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50779.72-99: Statistical methods. Sampling procedures for inspection by attributes. Part 2. Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
GOST R 51856-2001: Electromagnetic compatibility of technical equipment. Short range devices operating on frequencies between 3 kHz and 400 GHz. Requirements and test methods
GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods
GOST R 52628-2006: Nuts. Mechanical properties and test methods
GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications
GOST R 52645-2006: Hexagon nuts for high-strength structural bolting with large width across flats. Specifications.
GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods
GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection
GOST R ISO 4759-1-2009: Tolerances for fasteners. Part 1: bolts, screws, studs and nuts. Product grades A, B and C
GOST R ISO 6157-1-2009: Fasteners. Surface discontinuities. Part 1. Bolts, screws and studs for general requirements
GOST R ISO 6157-2-2009: Fasteners - Surface discontinuities - Part 2: Nuts
Letter 4315-OG/03: About the typo in GOST R 53664-2009
The Document is Referenced By:
Letter 4315-OG/03: About the typo in GOST R 53664-2009
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 443.1325800.2019: Bridges with aluminum alloy structures. Design rules
SP 453.1325800.2019: Artificial high-speed railway lines. Design and construction rules
SP 46.13330.2012: Bridges and pipes
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
