GOST R 54086-2010
ГОСТ Р 54086-2010
|
|
Pressure regulators. General specifications
Стабилизаторы давления. Общие технические условия
Status: Effective - Introduced for the first time
This standard applies to pressure stabilizers designed to reduce the dynamic loads acting on pipelines and other hydraulic equipment by damping the pressure pulsations of the pumped working medium and hydraulic impacts in them due to the dissipative and elastic damping effect on the flow distributed along the length of the pressure stabilizer movement in a pressure stabilizer. Pressure stabilizers are designed for the pressure of the working medium in the pipeline system - from 0.1 to 25 MPa. Permissible temperature of pumped medium up to 250 ° С
Настоящий стандарт распространяется на стабилизаторы давления, предназначенные для снижения динамических нагрузок, действующих на трубопроводы и иное гидравлическое оборудование, путем гашения, возникающих в них пульсаций давления перекачиваемой рабочей среды и гидроударов, за счет распределенного по длине стабилизатора давления диссипативного и упругодемпфирующего воздействия на поток при его движении в стабилизаторе давления. Стабилизаторы давления рассчитаны на давление рабочей среды в трубопроводной системе - от 0,1 до 25 МПа. Допустимая температура перекачиваемой рабочей среды - до 250 °С
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/30/2010
SKU: RUSS66977
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.1 For energy »
3.1.2 For thermal power »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.1 For energy »
3.1.1 For nuclear power »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.3 For oil industry »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.2 For gas industry »
Standards for pipe fittings (TPA) »
2. Standards for general specifications »
2.2 Control valves »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.1 Components and assembly units for general engineering applications »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipe fittings »
23.060.40 Control valves »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipeline valves »
23.060.40 Control valves »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G18 Fittings and pipeline connections »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements
GOST 12.3.025-80: Occupational safety standards system. Metal working by cutting. Safety requirements
GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications
GOST 14140-81: Basic norms of interchangeability. Position tolerances of bore axes for fasteners
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16295-93: Anticorrosion paper
GOST 166-89: Vernier callipers. Specifications
GOST 18360-93: Plate snap-gauges for diameters from 3 to 260 mm. Dimensions
GOST 18365-93: Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions
GOST 18923-73: Screw plug-gauges with truncated form inserts for pipe cylindrical threads from 1/16 'up to 4' nominal diameter. Construction and basic sizes
GOST 18930-73: Truncated form screw ring-gauges for pipe cylindrical threads from 1/16' up to 3 3/4' nominal diameter. Construction and basic sizes
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2216-84: Adjustable smooth snap gauges
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 22792-83: Assembly units and pipeline parts. Unions for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22793-83: Assembly units and pipeline parts. Bend arms for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 24297-87: Input inspection of products. General provisions.
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 28338-89: Nominal bores (nominal sizes)
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3845-75: Metallic tubes. Hydraulic pressure testing method
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 6507-90: Micrometers. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 52568-2006: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
GOST R 52720-2007: Pipeline valves. Terms and definitions
GOST R 53672-2009: Pipeline valves. General safety requirements
PB 03-576-03: Regulations of design and safe operation of pressure vessels
The Document is Referenced By:
Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
