imgalt

GOST R 55156-2012

ГОСТ Р 55156-2012

Mining equipment. Mine belt stage loader. General technical requirements and test methods

Оборудование горно-шахтное. Перегружатели ленточные шахтные. Общие технические требования и методы испытаний

Status: Effective - Introduced for the first time. IUS 5-2014

This standard applies to mine belt loaders (hereinafter referred to as loaders) intended for the transportation of rock mass with a particle size of not more than 150 mm when penetrating one- and two-track rectilinear mine planes with an angle of inclination from minus 6 ° to plus 6 ° as an intermediate link between loading machines or tunneling machines and vehicles of the construction to be built (mine wagons, semi-stationary conveyor, telescopic conveyor) in the following conditions: - mines (mines) of all categories, Key hazardous gas or dust; - Type 1 atmosphere according to GOST 15150 with air dustiness of not more than 200 mg / m2; - relative humidity not more than 98% at a temperature of 25 ° С; - power supply voltage fluctuations from minus 15% to plus 10% of the nominal value. Climatic version - У for categories 4 and 5 of GOST 15150. The standard establishes general technical requirements for the design, production and operation of reloaders

Настоящий стандарт распространяется на шахтные ленточные перегружатели (далее - перегружатели), предназначенные для транспортирования горной массы крупностью не более 150 мм при проходке одно- и двухпутевых прямолинейных в плане горных выработок с углом наклона от минус 6° до плюс 6° в качестве промежуточного звена между погрузочными машинами или проходческими комбайнами и транспортными средствами сооружаемой выработки (шахтные вагонетки, полустационарный конвейер, телескопический конвейер) в условиях: - шахты (рудники) всех категорий, включая опасные по газу или пыли; - атмосферы типа 1 по ГОСТ 15150 при запыленности воздуха не более 200 мг/ м кв; - относительной влажности не более 98 % при температуре 25° С; - колебаний напряжения питающей сети от минус 15 % до плюс 10 % номинального значения. Климатическое исполнение - У для категорий размещения 4 и 5 ГОСТ 15150. Стандарт устанавливает общие технические требования к проектированию, производству и эксплуатации перегружателей

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/22/2012

SKU: RUSS67028

Price: $349.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.4 Machines and equipment for mining, oil industry and quarrying »

ISO classifier » 73 MINING AND MINERAL PRODUCTS » 73.100 Mining equipment » 73.100.40 Equipment for haulage and lifting »

National standards » 73 MINING AND MINERAL PRODUCTS » 73.100 Mining equipment » 73.100.40 Equipment for haulage and lifting »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G41 Exploration, mining and mineral processing equipment »


The Document References:

GOST 10354-82: Polyethylene film Specifications

GOST 112-78: Meteorological glass thermometers

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.022-80: Conveyers.

GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places

GOST 12.2.106-85: Occupational safety standards system. Machines and mechanisms for mining of ore, non-ore and placer deposits. General hygienic requirements and methods of testing

GOST 12969-67: Plates for machines and devices. Technical requirements

GOST 12971-67: Rectangular plates for machines and devices. Dimensions

GOST 14192-96: Cargo marking

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 166-89: Vernier callipers. Specifications

GOST 17168-82: Octave and one-third-of-octave electronic filters

GOST 17187-2010: Noise meters Part 1 Technical requirements

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.601-95: Operational documents

GOST 2.602-95: Unified system for design documentation. Repair documents

GOST 21339-82: Tachometers

GOST 22645-77: Belt conveyors. Idlers. Types and basic dimensions

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 24754-81: General purpose mining electric equipment

GOST 27518-87: Diagnostics of items. General reguirements

GOST 29285-92: Reducers and motor-reducers. General requirements to the methods of experiments

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 31319-2006: Vibration. Measurement and evaluation of human exposure to whole-body vibration. Practical guidance for measurement at the workplace

GOST 31558-2012: Mine belt conveyers. General specifications

GOST 31592-2012: Machine reducers. General specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5378-88: Vernier protractors. Specifications

GOST 7338-90: Rubber and rubber-fabric sheets. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8476-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3. Special requirements for wattmeters and varmeters

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 50460-92: Mark of conformity for obligatory certification form, dimensions dnd technical requirements

GOST R 50891-96: Machine reducers. General specifications

GOST R 51042-97: Face belt conveyors. Test methods

GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements

GOST R 51330.1-99: Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus

GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane

GOST R 51984-2002: Mine belt conveyers. General specifications

PB 03-553-03: Uniform Safety Requirements for Underground Development of Ore, Non-Ore, and Placer Mineral Deposits

PB 05-618-03: Coal Mine Safety Regulations

PR 50.2.006-99: State system for ensuring uniformity of measurements. The procedure for calibration of measuring instruments

RD 05-325-99: Safety standards for main mining and transport equipment for coal mines

SN 2.2.4/2.1.8.566-96: Industrial vibration. Vibration in premises of residential and public buildings

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!