GOST R 9.905-2007
ГОСТ Р 9.905-2007
|
|
Unified system of corrosion and ageing protection. Corrosion test methods. General requirements
Единая система защиты от коррозии и старения. Методы коррозионных испытаний. Общие требования
Status: Effective - Introduced for the first time
This standard applies to metals, alloys, protective coatings, anti-corrosion protection products, parts, metal semi-finished products and other similar products and establishes general requirements for samples, equipment and conduct corrosion tests. General requirements for methods of testing for corrosion cracking (corrosion under stress) - according to GOST 9.901.1. The requirements established by this standard are intended for use in other standards for corrosion tests in artificial atmospheres, as well as for accelerated test methods and for the design of new chambers
Настоящий стандарт распространяется на металлы, сплавы, защитные покрытия, средства противокоррозионной защиты, изделия, детали, металлические полуфабрикаты и другую аналогичную продукцию и устанавливает общие требования к образцам, аппаратуре и проведению коррозионных испытаний. Общие требования к методам испытаний на коррозионное растрескивание (коррозию под напряжением) - по ГОСТ 9.901.1. Требования, установленные данным стандартом, предназначены для применения в других стандартах на коррозионные испытания в искусственных атмосферах, а также на ускоренные методы испытания и на конструкцию новых камер
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/19/2007
SKU: RUSS67052
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
25 Mechanical Engineering »
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.1 General requirements for tests on external factors »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
25.220.40 Metal coatings »
National standards »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
25.220.40 Metal coatings »
ISO classifier »
77 METALLURGY »
77.060 Corrosion of metals »
National standards »
77 METALLURGY »
77.060 Corrosion of metals »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T9 Unified system of protection against corrosion and aging of materials and products »
T99 Test methods »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10354-82: Polyethylene film Specifications
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 27597-88: Electronics items. Corrosion resistance evaluation method
GOST 3956-76: Silica gel technical. Technical conditions
GOST 5272-68: Corrosion of Metals. Terms
GOST 6709-72: Distilled water. Specifications
GOST 9.008-82: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Terms and definitions
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.072-77: Unified system of corrosion and ageing protection. Paint coating. Terms and definitions
GOST 9.103-78: Unified system of corrosion and ageing protection. Temporary prevention of metal and products. Terms and definitions
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking
GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests
GOST 9.311-87: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Method of corrosion damage evaluation
GOST 9.315-91: Unified system of corrosion and ageing protection. Hot-dip aluminium coatings. General requirement and methods of checking
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.
GOST 9.901.1-89: Unified system of corrosion and ageing protection. Metals and alloys. General requirements for corrosion cracking test methods
GOST 9.906-83: Unified system of corrosion and ageing protection. Test climatic stations. General requirements
GOST 9.908-85: Unified system of corrosion and ageing protection. Metals and alloys. Methods for determination of corrosion and corrosion resistance indices
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
GOST R 9.517-2003: Unified system of corrosion and ageing protection. Temporary rust protection of products. Test methods
GOST R 9.907-2007: Unified system of corrosion and ageing protection. Metals, alloys, metallic coatings. Methods for removal of corrosion products after corrosion tests
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
GOST R ISO/IEC 17025-2006: General requirements for the competence of testing and calibration laboratories
The Document is Referenced By:
GOST 23979-2018: Subs for casing and tubing. Specifications
GOST 9.911-2021: Unified system for protection against corrosion and ageing. Weathering-resistant steel. Method for accelerated corrosion tests
GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes
GOST R 56674-2018: Casting cookware of aluminum alloys with non-stick coating. General specifications
GOST R 58284-2018: Oil and gas industry. Marine field facilities and pipelines. General Requirements for Corrosion Protection
GOST R 58426-2020: Automobile roads for general use. Deicing materials. Test methods
GOST R 9.317-2010: Unified system of corrosion and ageing protection. Metallic coatings. Methods of measurement of ductility
GOST R 9.901.3-2007: Unified system of corrosion and ageing protection. Metals and alloys. General requirements for U-bend specimens of stress corrosion testing
GOST R 9.915-2010: Unified system of corrosion and ageing protection. Metals, alloys, coatings, products. Test methods of hydrogen embrittlement
ST CKBA 125-2020: Pipe fittings. Types of control and testing
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.