GOST R ISO 3126-2007
ГОСТ Р ИСО 3126-2007
|
|
Plastics piping systems. Plastics components of piping systems. Determination of dimensions
Трубопроводы из пластмасс. Пластмассовые элементы трубопровода. Определение размеров
Status: Effective - Introduced for the first time
This standard establishes methods for measuring and / or determining the dimensions of plastic elements of pipelines: pipes, fittings, etc., and the accuracy of measurement results, and also establishes methods for measuring angles, diameters, lengths, perpendicularities and wall thicknesses in order to assess compliance with their maximum deviations.
Настоящий стандарт устанавливает методы измерения и/или определения размеров пластмассовых элементов трубопроводов: труб, соединительных деталей и др. и точность результатов измерений, а также устанавливает методы измерения углов, диаметров, длин, перпендикулярностей и толщин стенок с целью оценки соответствия их предельным отклонениям
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/3/2007
SKU: RUSS67112
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.30 Plastic pipes, fittings not for liquids »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.30 Plastic pipes, fittings not for liquids »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L29 Test methods. Packaging. Marking »
National Standards for OKSTU »
POLYMERS, PLASTIC MASSES, CHEMICAL FIBERS AND RUBBERS »
Control methods (testing, analysis, measurements) »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 166-89: Vernier callipers. Specifications
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 6507-90: Micrometers. Specifications
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions
The Document is Referenced By:
GOST 18599-2001: Polyethylene pressure pipes. Specifications
GOST 22689-2014: Polyethylene pipes and fittings for waste discharge inside the buildings. Specifications
GOST 32412-2013: Unplasticized polyvinylchloride pipes and fittings for waste discharge inside the buildings. Specifications
GOST 32413-2013: Unplasticized polyvinylchloride pipes and fittings for sewerage and drainage systems outside the buildings. Specifications
GOST 32414-2013: Polypropylene pipes and fittings for waste discharge inside the buildings. Specifications
GOST 32415-2013: Pressure thermoplastic pipes and their fittings for water supply and heating systems. General specifications
GOST ISO 1167-1-2013: Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 1. General method
GOST ISO 1167-2-2013: Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 2. Preparation of pipe test pieces
GOST ISO 1167-4-2013: Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 4. Preparation of assemblies
GOST ISO 11922-1-2019: Thermoplastics pipes for transporting liquid and gaseous media. Dimensions and tolerances. Part 1. Metric Series
GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 52134-2003: Pressure thermoplastic pipes and their jointing elements for water-supply and heating systems. General specifications
GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications
GOST R 53201-2008: Fibre-glass plastic pipes and fittings. Specifications
GOST R 53201-2023: Composite polymer pipes and fittings with threaded joints for pressure and non-pressure pipelines. Technical conditions
GOST R 53630-2009: Pressure multilayer pipes for water-supply and heating systems. General specifications
GOST R 53630-2015: Multilayer pressure pipes for water supply and heating systems. General specifications
GOST R 54468-2011: Flexible pipes with thermal insulation for district heating, hot and cold water networks. General specifications
GOST R 54475-2011: Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54560-2015: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54866-2011: Thermoplastics pipes. Determination of the long-term hydrostatic strength on pipe samples by extrapolation method
GOST R 55075-2012: Sections of pipelines derived from composite materials intended for installation and rehabilitation of public water and wastewater systems. Specifications
GOST R 55076-2012: Fiberglass reinforced thermosetting plastic pipes and part of pipelines. Methods for determination of time to failure under sustained internal pressure
GOST R 55473-2013: Gas distribution systems. Requirements for gas distribution networks. Part 1. Polyethylene gas pipelines
GOST R 55473-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 1. Polyethylene gas pipelines
GOST R 55911-2013: Plastics piping systems. Multilayer pipes. Determination of the oxygen permeability of the barrier pipe
GOST R 56277-2014: Polymer composite pipes and fittings for intrafield pipelines. Specifications
GOST R 56290-2014: Gas distribution systems. Requirements to gas distribution networks. Part 3. Renovation
GOST R 56730-2015: Plastic flexible pipes with thermal insulation for district heating. General specifications
GOST R 56927-2016: Pipes made of oriented unplasticized polyvinylchloride for water supply. Specifications
GOST R 57034-2016: Fiber-reinforced thermosetting plastics pipes and parts of pipelines. Determination of resistance to short-time hydraulic pressure of plastic pipes and fittings
GOST R 57035-2016: Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Determination of resistance to cyclic internal pressure
GOST R 57069-2016: Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Methods for obtaining hydrostatic or pressure design basis
GOST R 57570-2017: Fiberglass reinforced thermosetting plastic pipes. Determination of beam deflection under full bore flow
GOST R 58018-2017: Interim composite polymeric supports for overhead power lines voltage 35-220 kV. General specifications
GOST R 58021-2017: Composite polymeric supports for overhead power lines of voltage 6-20 kV. General specifications
GOST R 58097-2018: Flexible reinfonced plastic pipes with thermal insulation and fittings for them for district heating and water-supply networks. General specification
GOST R 58121.1-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 1. General
GOST R 58121.2-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 2. Pipes
GOST R 58121.3-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 3. Fittings
GOST R 59910-2021: Polymeric pipes reinforced with a metal framework, and connecting parts to them. General technical conditions
GOST R 70628.2-2023: Plastic pipelines for water supply, drainage and pressure sewerage. Polyethylene (PE). Part 2. Pipes
GOST R 70628.3-2023: Plastic pipelines for water supply, drainage and pressure sewerage. Polyethylene (PE). Part 3. Fittings
GOST R 70707-2023: Compact units for treatment of domestic wastewater. General technical conditions
GOST R 70751-2023: Heat-resistant polymeric pipes for laying power cables with a voltage of 1 to 500 kV. General specifications
GOST R ISO 10467-2013: Glass-reinforced thermosetting plastics piping systems based on unsaturated polyester resins for pressure and non-pressure drainage and sewerage. General technical requirements
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg
SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling
SP 399.1325800.2018: External water supply and sewage systems made of polymer materials. Rules for design and installation
SP 536.1325800.2024: Field pipelines of non-metallic pipes. Design and construction rules
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.