GOST 5375-79
ГОСТ 5375-79
|
|
Rubber moulded boots. Specifications
Сапоги резиновые формовые. Технические условия
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1876 dated 12/06/91
The standard applies to molded rubber boots. Boots are available in the following types: general purpose; general purpose shortened; on an antiskid sole; acid and alkali resistant; frost-resistant; fishing with glued and molded extension. Boots are designed to protect the feet from water, and acid-alkali resistant boots - to protect the feet from water and weak solutions of inorganic acids and alkalis.
Стандарт распространяется на формовые резиновые сапоги. Сапоги выпускаются следующих видов: общего назначения; общего назначения укороченные; на противоскользящей подошве; кислотощелочестойкие; морозостойкие; рыбацкие с клееной и формовой надставкой. Сапоги предназначаются для защиты ног от воды, а кислотощелочестойкие сапоги - для защиты ног от воды и слабых растворов неорганических кислот и щелочей.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
2/20/1979
SKU: RUSS67149
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
017/2011 TR CU. On safety of light industry products »
Regulations and standards (to TR TS 017/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
019/2011 TR CU. On safety of personal protective equipment »
Regulations and standards (to ТР ТС 019/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.1 Rubber products »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.5 Testing and control of light industry products »
4.5.2 Clothing industry products »
ISO classifier »
61 SEWING INDUSTRY »
61.060 Shoes »
National standards »
61 SEWING INDUSTRY »
61.060 Shoes »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.99 Other rubber and plastic products »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.99 Other rubber and plastic products »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L6 Rubber and asbestos products »
L64 Household rubber products »
National Standards for OKSTU »
RUBBER AND ASBESTOS PRODUCTS »
Boots »
As a Replacement Of:
GOST 5375-70: Rubber moulded boots
The Document References:
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification
GOST 164-90: Vernier height gauges. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 269-66: Rubber. General requirements for the physical mechanical tests
GOST 270-75: Rubber. Method of the determination elastic and tensile stress-strain properties
GOST 29329-92: Balance for static weightings
GOST 426-77: Rubber. Method for the determination of abrasion resistance under slipping
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 482-77: Zink oxide oil paste. Specifications
GOST 7470-92: Micrometric depth meters. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7912-74: Rubber. The method for the determination of brittle temperature
GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state
The Document is Referenced By:
Decision 108: On the Program of development (introduction of changes, revision) of interstate standards, resulting in the application of which on a voluntary basis compliance with the technical regulations of the Customs Union "On safety of light industry products" (TR CU 017/2011), and interstate standards that contain rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulations of the Customs Union "On safety of light industry products" (TR CU 017/2011)
Decision 108: On Amendments to the Unified List of Quarantine Objects of the Eurasian Economic Union
Decision 180: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, as a result of which, on a voluntary basis, compliance with the requirements of the technical regulations of the Customs Union "On the safety of light industry products" (TR CU 017/2011) , and a list of international and regional (interstate) standards, and in their absence - national (state) standards containing rules and methods of research (testing) and measurements, including sampling rules necessary for the application and implementation of the requirements of the technical regulations of the Customs Union "On the safety of light industry products" (TR CU 017/2011) and the implementation of conformity assessment of objects of technical regulation
Decision 30: On approval of the list of products in respect of which the customs declaration is accompanied by a document about the conformity assessment requirements of the technical regulations of the Customs Union "On safety of agricultural and forestry tractors and trailers to them" (TR TS 031/2012) (as amended on March 21, 2017)
Decision 30: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, resulting in voluntary compliance with the requirements of technical regulations of the Customs Union "On Personal Protective Equipment Safety" (TR CU 019/2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including
GOST 10018-79: Copper cyanide technical. Technical conditions
GOST 12.4.217-2001: Occupational safety standards system. Personal protection equipment against radioactive substances and ionizing radiation. Requirements and test methods
GOST 14022-88: Anhydrous hydrogen fluoride
GOST 15899-93: 1,1,2,2,-tetrafluorodibromethane (khladon 114B2). Specifications
GOST 1625-2016: Formalin for industrial use. Specifications
GOST 16295-2018: Anticorrosive paper. Specifications
GOST 19814-74: Synthetic and regenerated acetic acid. Specifications
GOST 2081-2010: Carbamide. Specifications
GOST 2081-92: Carbamide
GOST 2184-2013: Sulphuric acid for industrial use. Specifications
GOST 2-2013: Ammonium nitrate. Specifications
GOST 8.346-79: State system for ensuring the uniformity of measurements. Steel horizontal tanks. Methods and means of verification
GOST R 50291-92: 1,1,2,2,-tetrafluorodibromethane (Khladon 114B2). Specifications
GOST R 53949-2010: Technical potassic saltpeter. Specifications
GOST R 54399-2011: Leather, fur, products of leather and furs. Parameters of safety and their norm
GOST R 54612-2011: Passenger cars on locomotive traction and railcars. Washing and cleaning requirements
GOST R 58234-2018: Traction rolling stock. Cleaning and washing requirements
GOST R 9.804-2006: Unified system of corrosion and ageing protection. Products and materials. Methods of laboratory testing for the stability in regards to the deterioration by rodents
Instruction 97300-001-95: Typical sectoral instruction No. 1 on labor protection for workers of all professions in crop production
PO 1.3.2.13.1054-2015: The management system for the provision of personal protective equipment for employees of Rosenergoatom Concern JSC
RD 34.03.605: Recommended Practice for Use of Personal Protective Equipment for Workers and Employees of Minenergo USSR and for Organization of Maintenance Thereof
RD 34.50.501-96: Model Guidelines for Operation of Electrolytic Units for Obtaining Hydrogen and Oxygen
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
TOI R-45-078-98: Standard labor protection instruction when servicing batteries
TR 217-2011: Technical recommendations on the technology of waterproofing works using the materials of the "Antihydron" complex during the construction of underground parts of buildings and structures
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
