imgalt

GOST 30457-97

ГОСТ 30457-97

Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points. Engineering method

Акустика. Определение уровней звуковой мощности источников шума на основе интенсивности звука. Измерение в дискретных точках. Технический метод

Status: Effective - Introduced for the first time

The standard applies to sound sources located in a stationary environment that does not contain gas streams acting on an acoustic probe to measure sound intensity, and establishes a method for measuring sound intensity at discrete points on a measuring surface, as well as the rules for calculating its sound power level

Стандарт распространяется на источники звука, расположенные в стационарной среде, не содержащей газовые потоки, воздействующие на акустический зонд для измерения интенсивности звука, и устанавливает метод измерения интенсивности звука в дискретных точках на измерительной поверхности, а также правила вычисления уровня его звуковой мощности

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of Russia, 4/28/1998

SKU: RUSS67369

Price: $365.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Standards for pipe fittings (TPA) » 11. Piping valves (TPA) tests » 11.3 Additional test procedures » 11.3.2 Seismic and vibration resistance tests, noise measurement »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » II Industrial sanitation and occupational health » 5 Protection against mechanical vibrations » 5.2 Acoustic noise »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.140 Acoustics and acoustic measurements »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.140 Acoustics and acoustic measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.140 Acoustics and acoustic measurements » 17.140.01 Acoustic measurements and noise control in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.140 Acoustics and acoustic measurements » 17.140.01 Acoustic measurements and noise control in general »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T3 Physics and Mechanics » T34 Oscillatory and wave-like movements. Bodies vibration. Sound. Acoustics »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Applied statistics. Methods for statistical control of quality, reliability, durability. General methods of control and testing of products »


The Document References:

GOST 17187-81: Noise meters

The Document is Referenced By:

GOST 12.2.091-2002: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements

GOST 12.2.091-2012: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements

GOST 23941-2002: Noise of machines. Methods for determination of noise characteristics. General requirements

GOST 31171-2003: Noise of machines. Guidelines for the selection of method for the determination of emission sound pressure levels at a work station and at other specified positions

GOST 31252-2004: Noise of machines. Guidelines for the selection of method for the determination of sound power levels

GOST 31298.1-2005: Noise of machines. Determination of sound insulation performances of enclosures. Part 1. Measurements under laboratory conditions for declaration of noise performans values

GOST 31298.2-2005: Noise of machines. Determination of sound insulation performances of enclosures. Part 2. Measurements in situ for acceptance and verification of declared noise performance values

GOST 31300-2005: Noise of machines. Liquid pumps. Noise tests

GOST 31326-2006: Noise. Guidelines for noise control by enclosures and cabins

GOST 31327-2006: Noise of machines. Procedure for the comparison of noise-emission data for machinery and equipment

GOST 31336-2006: Noise of machines. Engineering methods for measurement of noise of compressors and vacuum pumps

GOST 31353.1-2007: Noise of machines. Industrial fans. Determination of sound power levels under laboratory conditions. Part 1. General characteristic of methods

GOST 31353.4-2007: Noise of machines. Industrial fans. Determination of sound power levels under laboratory conditions. Part 4. Sound intensity method

GOST 31420-2010: Machine noise. A.C. power generating set s with the actuator from the combustion engine. Measuring of the noise by the method of female face.

GOST 31425.1-2010: Machine noise Procedure of tests for the noise of textile machines. Part 1 General requirements

GOST 32109-2013: Noise of machines. Acceptance test code for gear units for airborne sound

GOST 32111.1-2013: Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 1. Non-ducted outdoor equipment

GOST 32111.2-2013: Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 2. Non-ducted indoor equipment

GOST 32512-2013: Air curtains. General specifications

GOST 33604-2015: Machines and the equipment polygraphic, paper surfacing and papermaking. Methods for determination of noise characteristics. Accuracy grades 2 and 3

GOST 34251-2017: Hydraulic pumps. Noise test code. Accuracy grades 2 and 3

GOST 34730.1-2022: (IEC 60704-1:2021) Electrical appliances for household and similar purposes. Noise test code. Part 1. General requirements

GOST EN 1218-1-2013: Safety of woodworking machines. Tenoning machines. Part 1. Single end tenoning machines with sliding table

GOST EN 1218-2-2014: Safety of woodworking machines. Tenon cutting machines. Part 2. Machines for bilateral tendon cutting and / or profiling with chain conveyor feed

GOST EN 12415-2006: Safety of metal-working machine tools. Numerically controlled turning machines and turning centres

GOST EN 12417-2006: Safety of metal-working machine tools. Machining centres

GOST EN 12417-2016: Safety of machine tools. Sicherheit. Machining centres

GOST EN 12478-2006: Safety of machine tools. Large numerically controlled turning machines and large turning centres

GOST EN 12717-2011: Safety of machine tools. Drilling machines

GOST EN 13128-2006: Safety of metal-working machine tools. Milling machines (including boring machines)

GOST EN 13128-2016: Safety of metalworking machines. Milling machines (including boring)

GOST EN 13525-2012: Forestry machinery. Wood chippers. Safety

GOST EN 13898-2011: Safety of machine tools. Sawing machines for metal cold cutting

GOST EN 848-2-2013: Safety of woodworking machines. One side milling machines. Part 2. Single spindle milling machines with vertical upper arrangement of spindle

GOST IEC 60034-9-2014: Rotating electrical machines. Part 9. Noise limits

GOST IEC 61010-1-2014: Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements

GOST IEC 62109-1-2019: Safety of power converters for use in photovoltaic systems. Part 1. General requirements

GOST IEC/TS 62850-2016: Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children

GOST ISO 11205-2006: Noise emitted by machinery. Determination of emission sound pressure levels at the work station and at other specified positions using sound intensity. Engineering method

GOST ISO 230-5-2002: Test code for machine tools. Part 5. Determination of the noise emission

GOST R 1.7-2008: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of presentation and indication by development on the basis of application of international standards

GOST R 51342-99: Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards

GOST R 52319-2005: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements

GOST R 52797.1-2007: Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 1. Noise control strategies

GOST R 52797.2-2007: Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 2. Noise control measures

GOST R 52797.3-2007: Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 3. Sound propagation and noise prediction in workrooms

GOST R 52799-2007: Noise. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method

GOST R 52894.1-2007: Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 1. Non-ducted outdoor equipment

GOST R 52894.2-2007: Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 2. Non-ducted indoor equipment

GOST R 52895-2007: Noise of machines. Acceptance test code gear units for airborne sound

GOST R 52988-2008: Noise of machines. Reciprocating internal combustion engine driven alternating current generating sets. Measurement of airborne noise by the enveloping surface method

GOST R 52990.1-2008: Noise of machines. Textile machinery. Noise test code. Part 1. Common requirements

GOST R 52990.2-2010: Noise of machines. Textile machinery. Noise test code. Part 2. Spinning preparatory and spinning machinery

GOST R 52990.3-2010: Noise of machines. Textile machinery. Noise test code. Part 3. Nonwoven machinery

GOST R 52990.4-2010: Noise of machines. Textile machinery. Noise test code. Part 4. Yarn processing, cordage and rope manufacturing machinery

GOST R 52990.5-2010: Noise of machines. Textile machinery. Noise test code. Part 5. Weaving and knitting preparatory machinery

GOST R 52990.6-2010: Noise of machines. Textile machinery. Noise test code. Part 6. Fabric manufacturing machinery

GOST R 52990.7-2010: Noise of machines. Textile machinery. Noise test code. Part 7. Dyeing and finishing machinery and equipment

GOST R 53148-2008: Rotating electrical machines. Noise limits

GOST R 53479-2009: Printing trades equipment. Methods for determination of noise emission dates. Accuracy grades 2 and 3

GOST R 54431-2011: Metal-working machines. General safety requirements

GOST R 54805-2011: Centrifugal pumps. Technical specifications. Class II

GOST R 54969-2012: Food processing machinery and equipment. Equipment for pasta pressing. Safety and hygiene requirements

GOST R 54971-2012: Food processing machinery. Spreaders, stripping and cutting machines, stick return conveyors, stick magazines. Safety and hygiene requirements

GOST R 55804-2013: Information and warning systems on train traffic and railway rolling stock approach. General requirements

GOST R 58536.1-2019: Air conditioners, modular fluid coolers, heat pumps, process chillers and driers with electric compressors. Determination of sound power level. Part 1. Air conditioners, modular fluid coolers, heat pumps for space heating and cooling, dehumidifiers and process chillers

GOST R 58536.2-2022: Air conditioners, packaged fluid coolers, heat pumps, process chillers and dehumidifiers with electric compressors. Determination of sound power levels. Part 2. Heat pump water heaters

GOST R EN 12717-2006: Safety of machine tools. Drilling machines

GOST R EN 12750-2012: Safety of woodworking machines. Four sided planning (longitudinal and milling) machines

GOST R EN 12840-2006: Safety of machine-tools. Manually controlled turning machines with or without automatic control

GOST R EN 13788-2007: Safety of metal-working machine tools. Multi-spindle automatic turning machines

GOST R EN 13898-2009: Machine tools. Safety. Sawing machines for metal cold cutting

GOST R EN 1870-1-2011: Safety of woodworking machines. Circular sawing machines. Part 1. Circular multipurpose saw benches (with and without sliding table), circular dimension saw and circular building site saws

GOST R EN 848-1-2011: Safety of woodworking machines. One side milling machines. Part 1. Single spindle milling machines with vertical lower arrangement of spindle

GOST R EN 859-2010: Safety of woodworking machines. Hand fed surface planning machines

GOST R EN 860-2010: Safety of woodworking machines. Outside thickness planning machines

GOST R EN 861-2011: Safety of woodworking machines. Surface planning and thickening machines

GOST R IEC 60601-1-2010: Medical electrical equipment. Part 1. General requirements for basic safety and essential performance (IEC 60601-1:1988, IEC 60601-2-17(2004))

GOST R IEC 60601-1-2022: Medical electrical products. Part 1. General safety requirements with regard to the main functional characteristics

GOST R ISO 1680-2012: Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machines

GOST R ISO 22734-2-2014: Hydrogen generators using water electrolysis process. Part 2. Residential applications

SP 254.1325800.2016: Buildings and territories. Rules for designing of industrial sound protection

STB EN 1870-10-2007: Safety of woodworking machines. Radial saw machines. Part 10. Automatic and semiautomatic rising blade machines

STB EN 1870-11-2007: Safety of woodworking machines. Radial saw machines. Part 11. Automatic and semiautomatic horizontal cross-cutting rising blade machines, (radial arm-sawing machines)

STB EN 1870-12-2007: Safety of woodworking machines. Radial saw machines. Part 12. Pendulum cross-cutting rising blade machines

STB EN 1870-15-2007: Safety of woodworking machines. Radial saw machines. Part 15. Multi blade cross-cutting machines with motorized and manual loading and/or unloading

STB EN 1870-16-2007: Safety of woodworking machines. Radial saw machines. Part 16. Bilateral miter machines for V-shaped cutting

STB EN 1870-2-2006: Safety of woodworking machines. Circular sawing machines. Part 2. Horizontal and vertical machines for slabs cutting

STB EN 1870-3-2006: Safety of woodworking machines. Circular sawing machines. Part 3. Machines for cutoff turning from above and machines of combined types

STB EN 1870-4-2006: Safety of woodworking machines. Circular sawing machines. Part 4. Multishelf machines for longitudinal cutting with manual loading and/or unloading

STB EN 1870-5-2006: Safety of woodworking machines. Circular sawing machines. Part 5. Combined machines for circular processing and trimming from the bottom

STB EN 1870-6-2006: Safety of woodworking machines. Circular sawing machines. Part 6. Frame saws and combined frame saws, table circular sawing machines with manual loading and/ or unloading

STB EN 1870-7-2006: Safety of woodworking machines. Circular sawing machines. Part 7. Bolter machines with mechanical delivery of motorized table with manual loading and/ or unloading

STB EN 1870-8-2006: Safety of woodworking machines. Circular sawing machines. Part 8. Edging and deal-frame machines with motorized sawing unit and with manual loading and/ or unloading

STB EN 1870-9-2007: Safety of woodworking machines. Circular sawing machines. Part 9. Bilateral mitering machines with mechanical delivery and with manual loading and/ or unloading

STB EN 848-2-2004: Safety of woodworking machines. Continuous milling machines for single-end processing by rotating machine. Part 2. Single spindle milling machines with upper location of spindle and manual/ driven feed

STB EN 848-3-2004: Safety of woodworking machines. Continuous milling machines for single-end processing by rotating machine. Part 3. Drilling and milling machines with numeric programming control

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!