GOST R EN 1834-3-2010
ГОСТ Р ЕН 1834-3-2010
|
|
Reciprocating internal combustion engines. Safety requirements for engines, intended for use in potentially explosive atmospheres. Part 3. Group III engines for use in flammable dust atmospheres
Двигатели внутреннего сгорания поршневые. Требования безопасности к двигателям, предназначенным для применения в потенциально взрывоопасных средах. Часть 3. Двигатели Группы III для применения в средах, содержащих горючую пыль
Status: Not effective - Canceled. Registration information 1629-st dated 12.22.2011
This standard establishes safety requirements and / or safety measures to eliminate hazards and reduce the risks associated with the use of Group III piston internal combustion engines with explosion levels Db and Dc for use in potentially explosive atmospheres containing combustible dust. This standard does not apply to spark ignition engines. This standard does not apply to engines used in premises for the processing, manufacture or storage of explosives. This standard establishes methods for the necessary testing of engines and their auxiliary devices for safety testing in accordance with the list given in section 4
Настоящий стандарт устанавливает требования безопасности и/или меры по обеспечению безопасности для устранения опасностей и снижения рисков, связанных с применением поршневых двигателей внутреннего сгорания с воспламенением от сжатия Группы III с уровнями взрывозащиты Db и Dc для применения в потенциально взрывоопасных средах, содержащих горючую пыль. Настоящий стандарт не распространяется на двигатели с искровой системой зажигания. Настоящий стандарт не распространяется на двигатели, применяемые в помещениях для обработки, изготовления или хранения взрывчатых веществ. В настоящем стандарте установлены методы необходимых испытаний двигателей и их вспомогательных устройств для проверки безопасности в соответствии с перечнем, приведенным в разделе 4
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/23/2010
SKU: RUSS67456
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
012/2011 TR CU. On safety equipment for work in explosive environments »
Regulations and standards (to TR CU 012/2011) »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.230 Explosion protection »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.230 Explosion protection »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.020 Internal combustion engines »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.020 Internal combustion engines »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G84 Engines (except for transport and steam-powered) »
National Standards for KGS (State Standards Classification) »
Latest edition »
D Vehicles and packaging »
D0 General rules and regulations for transport and packaging »
D00 Terms and definitions »
National Standards for OKSTU »
HEAVY, POWER AND TRANSPORTATION ENGINEERING PRODUCTS »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10448-80: Marine, locomotive and industrial engines. Acceptance. Test methods
GOST 29076-91: Marine, locomotive and industrial diesel engines. Requirement to fire protection
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
GOST R 50761-95: Marine, locomotive and industrial diesels. General safety requirements
GOST R 51344-99: Safety of machinery. Principles for risk assessment
GOST R EN 1127-1-2009: Explosive atmospheres. Explosion prevention and protection. Part 1. Basic concepts and methodology
GOST R EN 1127-2-2009: Explosive atmospheres. Explosion prevention and protection. Part 2. Basic concepts and methodology for mining
GOST R EN 13463-1-2009: Non-electrical equipment for potentially explosive atmospheres. Part 1. Basic method and requirements
GOST R EN 1822-1-2010: High efficiency air filters ЕРА, HEPA and ULPA. Part 1. Classification, performance testing, marking
GOST R EN 1834-1-2010: Reciprocating internal combustion engines. Safety requirements for engines, intended for use in potentially explosive atmospheres. Part 1. Group II engines for use in flammable gas and vapour atmospheres
GOST R EN 1834-2-2010: Reciprocating internal combustion engines. Safety requirements for engines, intended for use in potentially explosive atmospheres. Part 2. Group I engines for use in underground workings susceptible to fired amp and/or combustible dust
GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R ISO 12100-1-2007: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terminology, methodology
GOST R ISO 12100-2-2007: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles
The Document is Referenced By:
GOST 31440.3-2011: Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Part 3. Group III engines for use in flammable dust atmospheres
GOST R EN 1834-1-2010: Reciprocating internal combustion engines. Safety requirements for engines, intended for use in potentially explosive atmospheres. Part 1. Group II engines for use in flammable gas and vapour atmospheres
GOST R EN 1834-2-2010: Reciprocating internal combustion engines. Safety requirements for engines, intended for use in potentially explosive atmospheres. Part 2. Group I engines for use in underground workings susceptible to fired amp and/or combustible dust
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
