GOST 24705-81
ГОСТ 24705-81
|
|
Basic norms of interchangeability. Metric screw thread. Basic dimensions
Основные нормы взаимозаменяемости. Резьба метрическая. Основные размеры
Status: Not effective - Superseded
The standard applies to general purpose metric threads with a profile according to GOST 9150-81, diameters and steps according to GOST 8724-81.
Стандарт распространяется на метрические резьбы общего назначения с профилем по ГОСТ 9150-81, диаметрам и шагами по ГОСТ 8724-81.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
4/23/1981
SKU: RUSS67467
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.040 Screw threads »
21.040.10 Metric threads »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.040 Screw Threads »
21.040.10 Metric threads »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G13 Threads »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
General rules and regulations for mechanical engineering »
The Document is Replaced With:
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
The Document References:
GOST 8724-81: Basic norms of interchangeability. Metric screw thread. Diameters and pitches
GOST 9150-81: Basic norms of interchangeability. Metric screw thread. Profile
The Document is Referenced By:
ATK 24.203.04-90: Pipeline connections with flanging of copper tubes. Types, dimensions and technical requirements
ATK 24.218.01-90: Bosses, Plugs, and Gaskets. Design, Dimensions, and General Technical Specifications
ATK 26-18-10-94: Devices for Installation of Temperature Measuring Devices for Use at Nominal Pressure from 0.6 to 16.0 MPa. Plugs. General Technical Requirements
ATK 26-18-11-96: The union screw and checkpoints. Design, dimensions and general technical requirements
ATK 26-18-12-96: Threaded flanges for installation of thermometers, manometers and other measuring devices for corrosive media on Ru from 4.0 to 16.0 MPa. Design and dimensions
GOST 10272-77: Double entry centrifugal pumps. Specification
GOST 10336-80: Cheese-head non-falling-out screws, product grade B. Design and dimensions
GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements
GOST 10602-94: Hexagon head bolts with thread diameter over 48 mm. Product grade B. Specifications
GOST 10605-94: Hexagon nuts with thread diameter over 48 mm. Product grade B. Specifications
GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw
GOST 10944-75: Control valves of the heating installations for building water heating systems
GOST 11030-93: Motor graders
GOST 11075-93: Hexagonal socket dog-point set screws. Product grades A and B. Specifications
GOST 11101-73: Air-foam nozzle. Specifications
GOST 11101-93: Air foam hoses. Specifications.
GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements
GOST 11530-93: Rail joint bolts. Specifications
GOST 11532-93: Nuts for rail joints. Specifications
GOST 11614-94: Semi-automatic flushing valves. Specifications
GOST 11644-75: Rounded-off pan-head screws, product grades A and B. Design and dimensions
GOST 11709-81: Metric screw threads in the range 1-180 mm diameters for the parts in plastics. Profile, basic dimensions and tolerances
GOST 11738-84: Hexagon socket head cap screws, accuracy class A. Construction and dimensions
GOST 11779-74: Moulding combined tamper and rammer. Design
GOST 11784-74: Rectangular finishing trowels. Design
GOST 11797-74: Triple-edged knives for shaping foundry cores. Design
GOST 11798-74: Corrugating rolls for cleaning foundry cores. Design
GOST 11800-74: Short vent needles. Design
GOST 11906-77: Spiral bevel and hypoid gear-shaping cutter heads. Specifications
GOST 12.2.073-82: Occupational safety standards system. Pressure-operated vessels. Bolts, studs and nuts. Technical requirements
GOST 12198-66: Holding devices. Guiding shoes. Design
GOST 12199-66: Holding devices. Groove screws for tension springs. Design
GOST 12200-66: Holding devices. Eye-screws for tension spring. Design
GOST 12201-66: Holding devices. Quick detachable bolts for slots of machines. Design
GOST 12202-66: Holding devices. Screw plugs. Design
GOST 12203-66: Holding devices. Round blind nuts. Design
GOST 12204-72: Holding devices. High legs. Design
GOST 12205-66: Holding devices. Low legs. Design
GOST 12211-66: Holding devices. Cylindrical locating pins of changeable type. Design
GOST 12212-66: Holding devices. Cut locating pins of changeable type. Design
GOST 12219-66: Holding devices. Thread washers. Design
GOST 12247-80: Large seamless steel gas cylinders for operating pressure of 31,4 and 39,2 MPa (320 and 400 kgf/cm sq.). Specifications
GOST 12458-67: Screws with bead. Design
GOST 12459-67: Strengthening bolts for machined slots. Design
GOST 12460-67: Nuts with lock screws. Design
GOST 12463-67: Pressure screws with star handle. Design
GOST 12464-67: Threaded bushes. Design
GOST 12465-67: Stop pins. Design and sizes
GOST 12466-67: Shackles with thread holes. Design and sizes
GOST 12468-67: Eccentrics double-supported. Design
GOST 12469-67: Countersunk axles. Design
GOST 12470-67: Forks with thread holes. Design
GOST 12479-67: High, permanent supports. Design
GOST 12481-67: Adjustable stays with ball headed. Design
GOST 12593-93: Metal cutting machine tools. Flanged spindle noses with swireluashers and flanges of fixtures. Basic and coupling dimensions
GOST 12595-2003: Metal-cutting machine tools. Flanged spindle noses of А type and flanges of fixtures. Basic and coupling dimensions
GOST 12595-85: Metal-cutting machine-tools. Flanged spindle noses of A type. Basis and coupling dimensions
GOST 12946-67: Overhead collar nut for machine retaining devices. Design and dimensions
GOST 12962-80: Medium expansion foam-making branch pipes. Specifications
GOST 12963-93: Suction nets. Specifications.
GOST 13040-67: Round nuts for tool holders. Dimensions
GOST 13044-83: Arbouns for shell multiflute drills and reamers. Construction and dimensions
GOST 13044-85: Arbouns for shell multiflute drills and reamers. Construction and dimensions
GOST 13152-67: Bolts for machine slots. Design and dimensions
GOST 13153-67: Wedge clamps. Design and dimensions
GOST 13154-67: Floating clamps for machine retaining devices. Design and dimensions
GOST 13156-67: Bushes of tangential clamps with thread hole for machine retaining devices. Design and dimensions
GOST 13158-67: Screw sprags built-in for machine retaining devices. Design and dimensions
GOST 13159-67: Adjustable jacks for machine retaining devices. Design and dimensions
GOST 13161-67: Bayonet type indexes for machine retaining devices. Design and dimensions
GOST 13162-67: Rack type indexes for machine retaining devices. Design and dimensions
GOST 13163-67: Rack type clips with tapered lock for machine retaining devices. Design and dimensions
GOST 13336-67: Sleeves for tools with tapered shank. Design and dimensions
GOST 1336-77: Thread milling cutters. Specifications
GOST 13427-68: Nuts with hole for handle for machine retaining devices. Design and sizes
GOST 13428-68: Dog point pressure screws for machine retaining devices. Design
GOST 13429-68: Pressure screws with point for foot for machine retaining devices. Design
GOST 13432-68: Pressure dog point screws with hole for handle for machine retaining devices. Design
GOST 13433-68: Pressure screws with hole for handle and point for foot for machine retaining devices. Design
GOST 13434-68: Hexagon head dog point pressure screws for machine retaining devices. Design
GOST 13435-68: Hexagon head pressure screws with point for foot for machine retaining devices. Design
GOST 13785-68: Arbors with tapered shank 7:24 and face keys for shell face cutters. Design and dimensions
GOST 13786-68: Arbors with tapered 7:24 and longitudinal key for shell cutters. Design and dimensions
GOST 13787-68: Arbors with tapered shank and longitudinal key without lug for shall cutters. Design and dimensions
GOST 13788-68: Arbors with tapered shank and face keys without lug for shell face cutters. Design and dimensions
GOST 13792-68: Adapters with pulling-off nut for end cutters with tapered shank. Design and dimensions
GOST 13795-68: Carries stems of boring bars. Dimensions
GOST 13876-87: Spindle noses for modular type machines. Basic dimensions
GOST 13895-75: Fixing of cutters on tool holders and boring bars. Design and dimensions
GOST 13896-68: Adjusting square countersunk headed screws. Design
GOST 13897-68: Check square countersunk headed screws with shortened cylindrical end. Design
GOST 14034-74: Centre holes. Dimensions
GOST 14279-79: Sleeved water collecting. Technical conditions
GOST 14630-80: Fire water sprinklers and drenchers
GOST 14724-69: Eye bolts. Design
GOST 14726-69: Knurled nuts. Design
GOST 14727-69: Spherical and hexagon nuts. Design
GOST 14729-69: Cylindrical countersunk nuts. Design
GOST 14730-69: Blocks for finished machine tool slots. Design
GOST 14731-69: Knurled head pressure screws. Design
GOST 14732-69: Sliding swing clamps shaped. Design
GOST 14733-69: Hook clamps. Design
GOST 14735-69: Swing clamps. Design
GOST 14736-69: Detachable clamps. Design
GOST 14739-69: Round keys. Design
GOST 14741-69: Four armed handles. Design
GOST 14743-69: Hooks. Design
GOST 1476-93: Cone-point straight slatted set screws. Product grades A and B. Specifications
GOST 1477-93: Flat-point straight slotted set screws. Product grades A and B. Specifications
GOST 1478-93: Dog-point straight slotted set screws. Product grades A and B. Specifications
GOST 1479-93: Cup-point straight slotted set screws. Product grades A and B. Specifications
GOST 1482-84: Square-head dog-point set screws. Product grades A and B. Construction and dimensions
GOST 1485-84: Square-head cup-point set screws. Product grades A and B. Construction and dimensions
GOST 1486-84: Square-head step-point with sphere set screws. Product grades A and B. Construction and dimensions
GOST 14901-93: Moulds for the manufacture of industrial rubber articles
GOST 15062-83: W.c. bowl seats. Specifications
GOST 15069-75: Tool holders with straight guide and Morse taper shank for horizontal milling machines. Design and dimensions
GOST 15070-75: Tool holders with supporting bush and Morse taper shank for horizontal milling machines. Design and dimensions
GOST 15506-91: All-cast molding boxes made of aluminum and magnesium alloys.
GOST 15510-70: Removable nut stops with joint pin for boring bars and boring arbors. Design
GOST 15511-70: Back nuts for boring bars and boring arbors. Design
GOST 15514-70: Nut stops for boring bars and boring arbors. Design
GOST 15521-70: Hexagon nuts with reduced width across flats, product grade B. Construction and dimensions
GOST 15522-70: Hexagon lock-nuts with reduced width across flats, product grade B. Construction and dimensions
GOST 15523-70: Hexagon thick nuts product grade B. Construction and dimensions
GOST 15524-70: Hexagon thick nuts product grade A. Construction and dimensions
GOST 15525-70: Hexagon thick nuts product grade B. Construction and dimensions
GOST 15526-70: Hexagon nuts, product grade C. Construction and dimensions
GOST 1556-67: Screw type stop with wedge for machine retaining devices. Design
GOST 15589-70: Bolts with hexagon head, product grade C construction and dimensions
GOST 15590-70: Hexagon reduced head bolts with guide neck product grade C. Construction and dimensions.
GOST 15591-70: Hexagon reduced head bolts, product grade C. Construction and dimensions
GOST 1559-67: Screw sprags for machine retaining devices. Design
GOST 1560-67: Screw ties for machine retaining devices. Design
GOST 15763-91: Pipeline thread connections for Py up to 63 MPa (up to 630 kgf/cm2)
GOST 16016-79: Bolts and screw-nuts for rail track crossing
GOST 16017-79: Inserted bolts for rail track fastenings.
GOST 16018-79: Nuts for clamp and inserted bolts of rail track fastenings
GOST 1604-71: Nut taps. Design
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 16324-83: Cast iron diaphragm control valves with pneumatic diaphragm actuator
GOST 16345-70: Universal single-rolled devices for a surface hardening of machine parts by rolling. Types. Technical requirements
GOST 16376-70: Die blocks of sizing dies. Construction and dimensions
GOST 16488-70: Drivers for grinding. Design
GOST 16675-80: Punches, female dies, holders, liner plates and keys. Specifications
GOST 16716-71: Threaded shanks for dies of sheet pressing. Construction and dimensions
GOST 16717-71: Shouldered and threaded shanks for dies of sheet pressing. Construction and dimensions
GOST 16890-71: Plates for knee rack-and-pinion-operated jigs. Design
GOST 16893-71: Plates for portal rack-and-pinion-operated jigs. Design
GOST 16896-71: Flat bearers. Design
GOST 16897-71: Blade bearers. Design
GOST 16925-93: Taps. Manufacturing tolerances on the threaded portion
GOST 17039-71: Taps. Required dimensions
GOST 17184-71: Turret lathe collets with rib and concentrically positioned cylindrical hole. Design and dimensions
GOST 17185-71: Turret lathe collets with rib and eccentrically positioned cylindrical hole. Design and dimensions
GOST 17270-71: Frames for hand hack-saws. Specifications
GOST 17437-81: Air filters - moisture separators
GOST 17473-80: Half-rounded head screws, product grades A and B. Design and dimensions
GOST 17474-80: Raised countersunk head screws, product grades A and B. Design and dimensions
GOST 17475-80: Countersunk head screws product grades A and B. Construction and dimensions
GOST 17528-72: Spindle cam arbors. Design and dimensions
GOST 17548-83: The tool spindle noses of spiral bevel and hypoid gear producing machines. Types and basic dimensions
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.5-87: Nuts. Mechanical properties and test methods
GOST 17695-72: Antifriction bearing assemblies with stationary retainer for sheet stamping dies. Construction and dimensions
GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications
GOST 18260-72: Thrust centres with screwed-off nut and cone 1:10 and 1:7. Design and dimensions
GOST 18438-73: Notched straight-side centre arbors. Design and dimensions
GOST 18440-73: Notched straight side sprindle arbors. Design and dimensions
GOST 18465-73: Gauges for metric thread from 1 to 68 mm. Required dimensions
GOST 18466-73: Gauges for metric thread over 68 to 200 mm. Required dimensions
GOST 18597-73: Motor fuel. Corrosion testing under water condensation conditions
GOST 18839-73: Machine-hand non-shaving taps. Design and dimensions
GOST 18840-73: Nut non-shaving taps. Design and dimensions
GOST 18841-73: Nut non-shaving taps with curved shanks. Design and dimensions
GOST 18842-73: Non-shaving taps. Required dimensions
GOST 18843-73: Non-slaving taps. Thread tolerances
GOST 19135-80: Domestic siphons. Specifications
GOST 19171-73: Adjustable holders for angled fastening of cutter for turret lathes. Design and dimensions
GOST 19191-73: Rigging screws with automatic stopping. Specifications
GOST 19257-73: Holes for threading metric thread. Diameters
GOST 19305-73: Centrifugal moulds with threaded shank and latch locks. Construction and dimensions
GOST 19306-73: Centrifugal moulds with threaded shank and centrifugal locks. Construction and dimensions
GOST 19306-98: Centrifugal moulds with threaded shank and centrifugal locks. Construction and dimensions
GOST 19309-73: Centrifugal moulds with flange, inserts and centrifugal locks. Construction and dimensions
GOST 19310-98: Pushers for centrifugal moulds. Construction and dimensions
GOST 19312-73: Latch lock for centrifugal moulds. Construction and dimensions
GOST 19367-74: Ledges of aluminium core boxes. Dimensions
GOST 19369-74: Ledges with packing of aluminium core boxes. Dimensions
GOST 19372-74: Pads for handles and cramps of aluminium core boxes. Dimensions
GOST 19374-74: Lugs and pads of aluminium core boxes and intermediate plates. Dimensions
GOST 19376-74: Butt walls (plugs) for aluminium core boxes. Dimensions
GOST 19377-74: Screwed inserts of core boxes. Dimensions
GOST 19378-74: Latched inserts of core boxes. Dimensions
GOST 19381-74: Pins for core boxes. Design and dimensions
GOST 19383-74: Install pins for core boxes. Design and dimensions
GOST 19385-74: Bushes for core boxes. Design and dimensions
GOST 19387-74: Handles for core boxes. Design and dimensions
GOST 19394-74: Round and rectangular uprights for core boxes. Design and dimensions
GOST 19404-74: Aluminium split core boxes. Joining by adjustable pins
GOST 19405-74: Aluminium split core boxes. Hinge joining
GOST 19406-74: Aluminium split core boxes. Fixings by eye bolts
GOST 19407-74: Aluminium split core boxes. Fixings by eye handles
GOST 19513-74: Faced chill moulds. Loose pins for gated patterns. Construction and dimensions
GOST 19514-74: Faced chill moulds. Guide pins for gated patterns. Construction and dimensions
GOST 19515-74: Faced chill moulds. Centring bushing for gated patterns. Construction and dimensions
GOST 19516-74: Faced chill moulds. Guide bushe for gated patterns. Construction and dimensions
GOST 19590-85: Fine-boring heads. Basic dimensions
GOST 19645-74: Moulding mallet with rubber beaters. Design
GOST 19646-74: Moulding hollow vibration-damping shoe. Design
GOST 19681-83: Water mixing and distribution accessories for sanitary and laboratory applications. General technical requirements
GOST 19681-94: Sanitary technical water mixing and distributing accessories. General specifications
GOST 19750-84: Flat metal gasket joint gate end part. Design and dimensions
GOST 19751-84: Flat metal gasket joint gate seats. Design and dimensions
GOST 19853-74: Lubricating plugs. Specifications
GOST 19862-87: Pneumatic drives. Methods of measuring parameters
GOST 19913-74: Holders with a cylindrical shank for right-angle holding of a tool for turret-lathes. Design and dimensions
GOST 19914-74: Holders with a cylindrical shank for angled holding of a tool for turn-lathes. Design and dimensions
GOST 19915-74: Holders with a cylindrical shank for cutting-off bit tools for turret-lathes. Design and dimensions
GOST 19964-74: Support plate for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions
GOST 19965-74: Support plate for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions
GOST 19966-74: Support plate for wax-pattern dies with rectangular matrices. Design and dimensions
GOST 19967-74: Movable retainer rings for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions
GOST 19968-74: Movable retainer rings for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions
GOST 19969-74: Movable retainer rings for wax-pattern dies with rectangular matrices. Design and dimensions
GOST 19970-74: Stationary retainer rings for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions
GOST 19971-74: Stationary retainer rings for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions
GOST 19972-74: Stationary retainer rings for wax-pattern dies with rectangular matrices. Design and dimensions
GOST 19976-74: Ejector plate-blanks for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions
GOST 19977-74: Ejector plate-blanks for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions
GOST 19978-74: Intermediate plate-blanks for wax-pattern dies with rectangular matrices. Design and dimensions
GOST 19982-74: Base-blanks for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions
GOST 19983-74: Base-blanks for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions
GOST 19984-74: Base-blank for wax-pattern dies with rectangular matrices. Design and dimensions
GOST 19996-74: Put-in nipple for wax-pattern dies. Design and dimensions
GOST 20131-80: Pattern plates
GOST 20506-75: Pivoting arbours for shell reamers for turret lathes. Design and dimensions
GOST 20508-75: Pivoting arbours for reamers with a cylindrical shank for turret lathes. Design and dimensions
GOST 20539-75: End mills with solid carbide tips and with spiral carbide blades. Specifications
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 20746-84: Vice for precision machining
GOST 20849-94: Heating convectors. Specifications
GOST 20868-81: Adjusting fixturing supports. Technical requirements
GOST 21088-75: Pushers with threaded shank for chill moulds with fluid cooling. Construction and dimensions
GOST 21090-75: Connecting pieces for chill moulds with fluid cooling. Construction and dimensions
GOST 21167-75: Machine bar centering vices with screw and lever. Design and main dimensions
GOST 21168-75: Machine bar centering vices with screw and prismatic jaws. Design and main dimensions
GOST 21187-75: Support holders for tangential cutters of automatic turret lathes. Design and dimensions
GOST 21188-75: Support holders for direct clamping of lathe cutters. Design and dimensions
GOST 21189-75: Prismatic supports for automatic lathe holders. Design and dimensions
GOST 21190-75: Roll supports for automatic turret lathe holders. Design and dimensions
GOST 21200-75: Support holders for tangential cutters of turret lathes. Design and dimensions
GOST 21201-75: Support holders for skew clamping of turret lathe cutters. Design and dimensions
GOST 21249-81: Blunt bolts. Construction and dimensions
GOST 21249-96: Blunt bolts for general purpose. Basic parameters and dimensions
GOST 21329-75: Edge filters at pressure up to 63 bar. Specifications
GOST 21331-75: High knurled-head screws. Construction and dimensions
GOST 21332-75: Low knurled-head screws. Construction and dimensions
GOST 21333-75: Low knurled-head and cone-point screws. Construction and dimensions
GOST 21334-75: Low knurled-head and step-point screws. Construction and dimensions
GOST 21335-75: Low knurled-head and cup-point screws. Construction and dimensions
GOST 21337-75: Low knurled-head and flat-dog point screws. Construction and dimensions
GOST 21760-76: Self-opening threadcutting die heads with circular chasets. Types and main dimensions
GOST 21973-76: Threaded piping joints. Joining threads. Series
GOST 21993-76: Safety lubricating valves. Specification
GOST 22032-76: Studs with threaded end of 1d. Product grade B. Construction and dimensions
GOST 22033-76: Studs with threaded end of 1d. Product grade A. Construction and dimensions
GOST 22034-76: Studs with threaded end of 1,25d. Product grade B. Construction and dimensions
GOST 22035-76: Studs with threaded end of 1,25d. Product grade A. Construction and dimensions
GOST 22036-76: Studs with threaded end of 1,6d. Product grade B. Construction and dimensions
GOST 22037-76: Studs with threaded end of 1,6d. Product grade A. Construction and dimensions
GOST 22038-76: Studs with threaded end of 2d. Product grade B. Construction and dimensions
GOST 22039-76: Studs with threaded end of 2d. Product grade A. Construction and dimensions
GOST 22040-76: Studs with threaded end of 1,2d. Product grade B. Construction and dimensions
GOST 22041-76: Studs with threaded end of 2,5d. Product grade A. Construction and dimensions
GOST 22042-76: Studs for smooth hole parts. Product grade B. Construction and dimensions
GOST 22043-76: Studs for smooth hole parts. Product grade A. Construction and dimensions
GOST 22065-76: Plate-blanks of injection moulds. Design and dimensions
GOST 22066-76: Clamping plate-blanks of injection moulds. Design and dimensions
GOST 22069-76: Cross-forming supporting plate-blanks of injection moulds. Design and dimensions
GOST 22070-76: Rectangular supporting plate-blanks of injection moulds. Design and dimensions
GOST 22072-76: Guide pins of injection moulds. Design and dimensions
GOST 22073-76: Guide bushings of injection moulds. Design and dimensions
GOST 22079-76: Shanks of injection moulds. Design and dimensions
GOST 22080-76: Shouldered shanks of injection moulds. Design and dimensions
GOST 22081-76: Flange-blanks of injection moulds. Design and dimensions
GOST 22130-86: Steel Pipeline Parts
Movable supports and suspensions
Specifications
GOST 22329-93: Screw strainers for wooden split core boxes. Design
GOST 22333-93: Bolt lifting screw for wooden cast patterns. Design
GOST 22353-77: High strength bolts of product grade B. Construction and dimensions
GOST 22472-87: Dies for a sheet-metal stamping
GOST 22474-77: Pins for fixing and securing the patterns on master pattern plates. Design and dimensions
GOST 22627-77: Tapping chucks for turret-lathes. Design and dimensions
GOST 22628-77: Sockets for tapping chucks for turret-lathes. Design and dimensions
GOST 22629-77: Movable chasing chucks for automatic lathes. Design and dimensions
GOST 22630-77: Sockets for movable chasing chucks for automatic lathes. Design and dimensions
GOST 22742-77: Sets of square connectors fixture of radio electronic items. Specifications
GOST 22790-83: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 2287-88: Flat thread chasers
GOST 22908-78: Dresser diamonds. Specifications
GOST 22993-78: Three-jaw chucks with key for hand drilling tools. Basic dimensions
GOST 22999-88: Portable hand-driven sprayers
GOST 23074-85: Fertilizer placers for liquid organic fertilizers
GOST 23102-78: Connecting branches of small sized board pipe fitting. Construction and dimensions
GOST 2323-76: Noses of grinding spindles with outside taper. Coupling dimensions
GOST 23289-94: Waste water drain sanitary accessories. Specifications
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications
GOST 23982-85: Fertilizing machinery
GOST 24114-80: Keyway prism gauges for shafts with diameter over 22 to 200 mm. Design and dimensions
GOST 24140-80: Pipe-line fastening parts. Cramps and clamps. Specifications
GOST 24201-80: Connective and fastening components of glass pipelines
GOST 24351-80: Three- and two-jaw lathe self-centring chucks with wedge and lever-type clamps. Basic dimensions
GOST 24611-81: Magazine pattern plates. Basic parameters and dimensions
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24834-81: Basic norms of interchangeability. Metric screw thread. Transition fits
GOST 24906-81: Gear-shaping cutter heads for straight bevel gears
GOST 24997-81: Gauges for metric threads. Tolerances
GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 25165-82: Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements
GOST 2524-70: Hexagon nuts with reduced width across flats (high precision). Constructions and dimensions
GOST 2526-70: Low hexagon nuts with decreased size “across flats” of accuracy class a
GOST 25453-89: Pneumatic valves and air conditioners. Nominal diameters and connecting threads
GOST 25455-82: Rolling bearings. Tapered and withdrawal sleeves. Technical requirements
GOST 25531-82: Lubricators. Specifications
GOST 2575-79: Thrust centres with nut screwed-off nut. Design
GOST 25797-83: Products of lock and hardware for the focal elements of enclosing structures made of aluminum alloys. General specifications
GOST 25933-83: Screws with cheese head of smaller diameter for electrical engineering. Construction and dimensions
GOST 26153-84: One-column dividing stands
GOST 26234-84: Head-type jig replaceable bushing of with standard and enhanced accuracy. Design and Dimensions
GOST 26258-87: Counterbores designed for working bearing surfaces under fastenings. Specifications
GOST 26259-87: Cuides. Design and dimensions
GOST 26350-84: Tube connections and fittings. Connecting threads. Series
GOST 26405-84: Tools for manufacturing bolts and nuts using cold heading machines
GOST 26613-85: Lathe tools with mechanic fastening of replaceable faceted plates
GOST 26860-93: Holders with clamp screw for flatted parallel shank end mills. Dimensions of the driving system of tool shanks
GOST 26862-86: Rins. General specifications
GOST 27320-87: Expansive bolts. Construction
GOST 27358-87: Press moulds for manufacturing of plastic items
GOST 27441-87: Gas apparatuses for thermal treatment of food for the plants of public catering classification, general technical requirements and test methods
GOST 2746-90: Screw holders for electric lamps. General specifications
GOST 2822-78: Threaded ends of marine valves and fittings. Types, main characteristics and dimensions and technical requirements
GOST 2832-77: Adjusting rings with screw fastening. Dimensions
GOST 28456-90: Expansive dowels for building. General specifications
GOST 2876-80: Gripping collets. Basic and coupling dimensions
GOST 2877-80: The grips giving. Main and connecting dimensions
GOST 30086-93: Jig bushes and accessories for drilling purposes. Dimensions
GOST 30326-95: Safety of information technology equipment included electrical business equipment
GOST 3033-79: Eye bolts. Design and dimensions
GOST 30496-97: Emergency stop valves for pneumatic systems of railway rolling stock brake equipment. General specifications
GOST 3055-69: Ball head handles. Design
GOST 30735-2001: Heating hot-water boilers with capacity from 0,1 to 4,0 MW. General specifications
GOST 30892-2002: Basic norms of interchangeability. Metrical MJ theads. Profile, general plan, tolerances
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 3266-81: Machine and hand taps. Design and dimensions
GOST 3385-69: Wing nuts. Desing
GOST 4084-68: Adjustable rests for machine retaining devices. Design
GOST 4085-68: Adjustable hexagon head rests for machine retaining devices. Design
GOST 4086-68: Adjustable round head rests for machine retaining devices. Design
GOST 4608-81: Basic norms of interchangeability. Metric screw thread. Interference fits
GOST 4626-79: Equipment for horizontal tanks for petroleum products. Valve inlet. Specification
GOST 4734-69: Swing clamp straps. Design
GOST 4735-69: Sliging clamp straps. Design
GOST 4736-69: Tiltable clamp straps. Design
GOST 4738-67: Forks with thread shanks. Design
GOST 4739-68: Ears for machine retaining devices. Design
GOST 4741-68: Thread ransitional bushes for machine retaining devices. Design
GOST 4751-73: Screw rings. Specifications
GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications
GOST 5918-73: Hexagon slotted and castle nuts, accuracy class B. Construction and dimensions
GOST 5927-70: Hexagon nuts (high precision). Construction and dimensions
GOST 5929-70: Hexagon lock nuts (high precision). Construction and dimensions
GOST 5931-70: Hexagon domed nuts (high precision). Construction and dimensions
GOST 5933-73: Hexagon thin slotted and castle nuts, accuracy class A. Construction and dimensions
GOST 5976-73: Centrifugal fans, general purpose
GOST 6393-73: Round nuts with set pin holes in side, product grade A. Design and dimensions
GOST 6911-71: Dual-line feeders for centralized lubricating systems. Specifications
GOST 6918-81: Line screen grease strainers. Specifications
GOST 6951-71: Nut taps with curved shanks. Design and dimensions
GOST 7183-93: Foam mixers. Specifications.
GOST 7275-75: Adjustable wrenches
GOST 7498-75: Fire hydraulic elevator. Specifications
GOST 7498-93: Hydro elevators for firefighting. Specifications.
GOST 7786-81: Countersunk square shoulder bolts, product grade C. Construction and dimensions
GOST 7787-81: Deep countersunk head bolts, product grade C. Construction and dimensions
GOST 7796-70: Hexagon reduced head bolts product grade B. Construction and dimensions
GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions
GOST 7801-81: Increased cup nibbed head bolts, product grade C. Construction and dimensions
GOST 7817-80: Product grade A fit bolts with hexagon reduced head. Construction and dimensions
GOST 799-73: Fishplate bolts for broad gauge. General requirements
GOST 8037-93: Hose branches. Specifications.
GOST 8144-73: Fishplate bolts for narrow gauge
GOST 8220-85: Underground fire hydrants. Specifications
GOST 8381-73: Round nuts with radially spaced holes, product grade A. Design and dimensions
GOST 8519-88: Diesel high-pressure fuel lines and connections. General specifications
GOST 8519-93: Diesel engine fuel injection pipes and their connections
GOST 8530-83: Ball and roller bearings. Nuts, round, slotted for fastening and connecting bushings. Specification
GOST 8530-90: Rolling bearings. Locknuts, washers and cramps for tapered adaptive and withdrawal sleeves. Specifications
GOST 8615-89: Universal dividing heads
GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan
GOST 8918-69: Hexagon nuts with bead. Design
GOST 8921-69: Swing handle nuts. Design
GOST 8922-69: Loaded screws (journals). Design
GOST 8923-69: Cylindrical handles. Design
GOST 8924-69: Levers with ball handles. Design
GOST 9000-81: Basic norms of interchangeability. Metric screw thread for diameters less than 1 mm. Tolerances
GOST 9029-72: Fire turntable combined monitor
GOST 9047-69: Hook bolts. Construction
GOST 9048-69: Spherical head bolts. Construction
GOST 9049-69: Locking screws. Construction
GOST 9051-68: Hexagon socket dog point pressure screws for machine retaining devices. Design
GOST 9052-69: Shouldered screws. Design
GOST 9057-69: Double-sided swing clamp straps. Construction
GOST 9059-69: Bushes for hook clamps straps. Construction
GOST 9064-75: Nuts for flanged connections with medium temperature 0 to 650 °C. Types and main dimensions
GOST 9066-75: Studs for flanged connections with medium temperature 0 °C to 650 °C. Types and main dimensions
GOST 9074-85: Joined by pins slot cloths
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
GOST 9321-73: Rollers. Specifications
GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.
GOST 9400-81: Threaded connecting ends for valves, fittings and pipes with tens - shaped seals for pn20-100 mpa (200-1000 kgf/cm2) dimensions
GOST 9520-73: Vertical fine boring machines. Basic dimensions
GOST 9539-72: Thread rolls. Specifications
GOST 9731-79: Large capacity seamless steel gas-cylinders for operation pressure 4.5 MPa (250 kgf / cm2)
GOST 9740-71: Circular screw dies. Specifications
GOST 9806-90: Lamp-holders for tubular fluorescent lamps and starter-holders. General specifications
GOST 9923-80: Manual fire barrel. Specifications
GOST R 50022-92: Tractors for agriculture and forestry. Mounting and apertures for external equipment control
GOST R 50253-92: Rail joint bolts. Specifications
GOST R 50273-92: Prevailing torque type hexagon nuts (with non-metallic insert). Property classes 5, 8 and 10. Specifications
GOST R 50327.2-92: Anaesthetic and respiratory equipment. Conical connectors. Part 2. Screw-threaded weight-bearing connectors
GOST R 50398-92: Fire hydraulic elevator. Specifications
GOST R 50399-92: Air-foam nozzles. Specifications
GOST R 50400-92: Hose branching. Specifications
GOST R 50401-92: Suction gauzes. Specifications
GOST R 50403-92: Countersunk head screws. Product grades A and B. Specifications
GOST R 50405-92: Slotted cheese head screws. Product grades A and B. Specifications
GOST R 50408-92: Foam mixers. Specifications
GOST R 50409-92: Medium expansions foam-making branch pipes. Specifications
GOST R 50561-93: Hexagonal dienuts. Dimensions
GOST R 50592-93: Hexagon nuts with flange. Product grade A. Specifications
GOST R 50793-95: Hexagon head bolts with thread to head, product grades A and B. Specifications
GOST R 50794-95: Hexagon head bolts, product grade C. Specifications
GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
GOST R 51052-2002: Аutomatic water and foam fire extinguishing installations. Wet and dry systems alarm stations. General technical requirements. Test methods
GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking
GOST R 51733-2001: Gas-fired central heating boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW. Safety requirements and test methods
GOST R 51753-2001: High pressure cylinders for the compressed natural gas as a fuel for automotive vehicles. General specifications
GOST R 51843-2001: Flame supervision devices for gas burning appliances. Thermo-electric flame supervision devices. General technical requirements and test methods
GOST R 51982-2002: Gas appliances pressure governors for inlet pressure up to 20 kPa. General technical requirements and test methods
GOST R 51983-2002: Multifunctional controls for gas burning appliances. General technical requirements and test methods
GOST R 52057-2003: Taps for gas burning appliances. General technical requirements and test methods
GOST R 52209-2004: Hose assemblies for gas burners and gas appliances. General technical requirements and test methods
GOST R 53249-2009: Fire-fighting equipment. Sleeved water collecting. General technical requirements. Methods of testing
GOST R 53250-2009: Fire-fighting equipment. Fire standpipe. General technical requirements. Methods of testing
GOST R 53252-2009: Fire-fighting equipment. Foam mixers. General technical requirements. Methods of testing
GOST R 53253-2009: Fire-fighting equipment. Suction gauzes. General technical requirements. Methods of testing
GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods
GOST R 54448-2011: Single burner gas-fired overhead radiant tube heaters for non-domestic use. Part 1. Safety requirements
GOST R EN 257-2004: Mechanical thermostats (thermoregulators) for gas appliances. General technical requirements and test methods
GOST R IEC 60950-2002: Safety of information technology equipment
NPB 153-2000*: Fire fighting equipment. Fireheads connecting. Technical requirements for fire safety. Test methods
NPB 153-96: Connecting heads for fire equipment. Basic Indexis. Test Methods
NPB 154-2000: Fire machinery. Fire hydrants valves. Specifications for fire safety. Test methods.
NPB 154-96: Fire valves. Basic Indexis. Test Methods
NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods
NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods
NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods
NPB 83-99: Automatic water and foam fire extinguishing installations. Wet and dry system alarm stations. General technical requirements. test methods
ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)
OST 108.033.01-86: mechanical stokers. Technical conditions.
OST 24.125.22-89: Lobes for pipelines of nuclear thermal power plant. Design and dimensions.
OST 24.125.23-89: Plugs for nuclear thermal power plant pipelines. Design and dimensions.
OST 24.125.57-89: Lobes for pipelines of nuclear thermal power plant. Design and dimensions.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26.260.460-99: Lobes, locks and pads. Design, dimensions and general technical requirements.
OST 26.260.462-99: Devices for installation of instruments measuring the temperature for PN from 0.6 to 16 MPa. Types, design, dimensions and general technical requirements
OST 26-01-139-81: Studs threaded vessels and apparatus connections for pressure over 9.81 up to 98.1 MPa (over 100 up to 1000 kgf/cm2). Types. Design and dimensions.
OST 26-01-140-81: Nuts for threaded joints of vessels and apparatuses for pressure over 9.81 to 98.1 MPa (over 100 to 1000 kg/cm2). Types. Construction and dimensions.
OST 26-01-142-81: Sockets for threaded joints of vessels and apparatuses for pressure over 9.81 to 98.1 MP (100 to 1000 kg/cm2). Construction and dimensions.
OST 26-01-143-81: Protective caps for threaded joints of vessels and devices for pressure over 9.81 to 98.1 MPa (100 to 1000 kg/cm2). Design and dimensions.
OST 26-04-2000-77: Plugs. Design and dimensions. Specifications.
OST 26-1420-75: Adjusting screws, nuts and support plates for equipment installation. Construction and dimensions.
OST 26-2037-96: Bolts with hexagonal head for flange joints. Design and dimensions.
OST 26-2038-96: Hex nuts for flange connections. Construction and dimensions.
OST 26-2039-96: Studs with screw-end for flanged connections (single precision). Design and dimensions.
OST 26-2040-96: Studs for flanged joints. Design and dimensions
OST 26-2041-96: Nuts for flange connections. Construction and dimensions.
OST 34-10-504-95: Details and components of TPS pipelines. Flanged connections for disk orifice plates of TPS pipelines for Pnom 2.5 MPa (25 kg/cm2). Construction and dimensions.
OST 34-10-757-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
OST 37.001.125-81: Countersunk screws. Construction and dimensions.
OST 37.001.137-83*: Self-locking hex nuts, crimped at the end. Construction and dimensions
PB 03-108-96: Process pipeline design and safe operation rules
RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.
RD 153-34.1-39.603-99: Fittings repair manual of high parameters.
RD 26.260.007-92: Pipelines and pipeline parts for pressure of 250 MPa (2500 kgf/cm2) of polyethylene production. Basic technical requirements, certification, operation and repair
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
SA 03-004-07: Calculation of the strength of vessels and apparatus
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
SP 16.13330.2011: Steel structures
SP 53-101-98: Manufacturing and quality control of steel structures for construction
SP 53-102-2004: General rules for steel structure design
TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs
TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs
TU 34-38-20365-94: Power valves. General technical conditions for major repairs
TU 34-38-20409-94: Pulse-safety devices Chekhov factory of power engineering. General technical conditions for major repairs
TU 3680-001-04698606-04: Pipe Support
TU 3742-001-96231033-2006: Swing check valve type 19s38nzh and 19s73nzh. Technical conditions
TU 3799-004-11013589-2004: Flange Isolation Joint (FIS). Technical conditions
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.