GOST 12.4.252-2013
ГОСТ 12.4.252-2013
|
|
Occupational safety standards system. Personal protective means of hands. Gloves. General technical requirements. Test methods
Система стандартов безопасности труда. Средства индивидуальной защиты рук. Перчатки. Общие технические требования. Методы испытаний
Status: Effective - Introduced for the first time. IUS 2-2014
The standard applies to personal protective equipment for hands used to protect them from the harmful effects of various external factors: sewing (made from fabrics of various raw materials, artificial and natural leather, knitted and non-woven fabrics); knitted; mikannye, shtantsovanny (latex and from polymeric materials, film and on a textile basis). The standard establishes general technical requirements for them and test methods for finished products as a whole.
Стандарт распространяется на средства индивидуальной защиты рук, применяемые для их защиты от вредного воздействия различных внешних факторов: швейные (изготовленные из тканей различного сырьевого состава, искусственных и натуральных кож, трикотажных и нетканых полотен); трикотажные; маканые, штанцованные (латексные и из полимерных материалов, пленочные и на текстильной основе). Стандарт устанавливает общие технические требования к ним и методы испытаний готовых изделий в целом.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/15/2013
SKU: RUSS67600
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
019/2011 TR CU. On safety of personal protective equipment »
Regulations and standards (to ТР ТС 019/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
8 Personal protective equipment »
8.4 Legs, hands protection »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.40 Hand protection »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.40 Hand protection »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.99 Other rubber and plastic products »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.99 Other rubber and plastic products »
The Document References:
GOST 10681-75: Textiles. Methods for determination atmospheric conditions for sample conditioning and testing
GOST 11209-2014: Fabrics for protective clothing. Technical general requirements. Methods for testing
GOST 12.4.002-97: Vibration protection means for hands
GOST 12.4.063-79: Occupational safety standards system. Means of hands protection. Method for determination of acid and alkali penetrability
GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification
GOST 12.4.115-82: Occupational safety standards system. Personal safety means. General requirements for marking
GOST 12.4.141-99: Occupational safety standards system. Hand protection means, industrial clothing and materials for their manufacture. Methods for determination of cut resistance
GOST 12.4.167-85: Occupational safety standards system. Filmy polymeric materials for hand protection means. Method of determination of abrasion resistance
GOST 12.4.183-91: Materials for means of hand protection
GOST 12.4.184-97: Occupational safety standards system. Fabrics and materials for industrial clothing, hand protection means and upper for safety shoes. Methods for determination of burning-through resistance
GOST 12.4.217-2001: Occupational safety standards system. Personal protection equipment against radioactive substances and ionizing radiation. Requirements and test methods
GOST 12023-2003: Textile materials and articles of them. Method of thickness determination
GOST 12739-85: Knitted fabrics and garments. Method for the determination of abrasion resistance
GOST 13344-79: Waterproof abrasive cloth. Specifications
GOST 19712-89: Knitted garments. Methods for determination of breaking factors and extensibility when loading is less than breaking
GOST 20010-93: Industrial rubber gloves
GOST 270-75: Rubber. Method of the determination elastic and tensile stress-strain properties
GOST 28073-89: Sewing articles. Methods for the determination of breaking load, elongation of thread seams, slippage of fibre trends in seams
GOST 29122-91: Means of individual protection х
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8846-87: Knitted fabrics and garments. Methods for determination of linear dimensions, distortion number of courses and wales and yarn length in the loop
The Document is Referenced By:
Decision 30: On approval of the list of products in respect of which the customs declaration is accompanied by a document about the conformity assessment requirements of the technical regulations of the Customs Union "On safety of agricultural and forestry tractors and trailers to them" (TR TS 031/2012) (as amended on March 21, 2017)
Decision 30: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, resulting in voluntary compliance with the requirements of technical regulations of the Customs Union "On Personal Protective Equipment Safety" (TR CU 019/2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including
GOST 10289-2022: Oil for marine gas turbines. Specifications
GOST 12.4.274-2014: Occupational safety standards system. Protective means of hands from the contact with cooled objects. General technical requirements
GOST 12.4.278-2014: Occupational safety standards system. Means of personal protection of hand. Protective gloves against chemicals and micro-organisms. General technical requirements. Test methods
GOST 20799-2022: Industrial oils. Technical conditions
GOST 21791-2022: Synthetic oil MAS-30NK. Specifications
GOST R 54400-2020: General automobile roads. Hot asphalt concrete mixes and hot asphalt concrete mixes. Test methods
GOST R 54401-2020: General automobile roads. Hot asphalt concrete mixes and hot asphalt concrete mixes. Technical specifications
GOST R 55425-2013: General use highways. Cationic road bituminous emulsions. Method of bitumen recovery by evaporation
GOST R 55426-2013: General use highways. Cationic road bituminous emulsions. Method for determination of adhesivity with mineral materials
GOST R 58400.10-2019: General automobile roads. Bituminous petroleum binders. Method for determining properties using a dynamic shear rheometer (DSR)
GOST R 58400.11-2019: General automobile roads. Bituminous petroleum binders. Method for determining cracking temperature using an ABCD device
GOST R 58400.1-2019: General automobile roads. Bituminous petroleum binders. Specifications taking into account the temperature range of operation
GOST R 58400.2-2019: General automobile roads. Bituminous petroleum binders. Technical conditions taking into account the levels of operational transport loads
GOST R 58400.5-2019: General automobile roads. Bituminous petroleum binders. Pressure and Temperature Aging (PAV)
GOST R 58400.6-2019: General automobile roads. Bituminous petroleum binders. Method for determining elastic properties at multiple shear loads (MSCR) using a dynamic shear rheometer (DSR)
GOST R 58400.7-2019: General automobile roads. Bituminous petroleum binders. Fatigue Test Method
GOST R 58400.8-2019: General automobile roads. Bituminous petroleum binders. Method for determination of bitumen hardness and creep at negative temperatures using a beam bending rheometer (BBR)
GOST R 58400.9-2019: General automobile roads. Bituminous petroleum binders. Method for determining low temperature properties using a dynamic shear rheometer (DSR)
GOST R 58401.10-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Methods for determination of bulk density
GOST R 58401.11-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Multiple Bending Fatigue Test Method
GOST R 58401.1-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. The system of volumetric-functional design. Technical requirements
GOST R 58401.12-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Method for determining the dynamic modulus of elasticity using the installation of dynamic loading (SPT)
GOST R 58401.13-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Rotary seal sample preparation method
GOST R 58401.14-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Sample preparation method for determining the dynamic module
GOST R 58401.15-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Determination of bitumen binder content by burning method
GOST R 58401.16-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Methods for determining the maximum density
GOST R 58401.17-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Method for determining the internal angle of a rotary seal
GOST R 58401.18-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Method for determination of water resistance and adhesive properties
GOST R 58401.19-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Determination of bitumen binder content by extraction method
GOST R 58401.20-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Methods for determining bulk density using waxed samples
GOST R 58401.21-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Methods for determining the dynamic modulus of elasticity and the yield strength using a dynamic loading unit (AMPT)
GOST R 58401.2-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete crushed stone and mastic. The system of volumetric-functional design. Technical requirements
GOST R 58401.22-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Determination of layer density by non-destructive methods
GOST R 58401.23-2019: General automobile roads. Mixes asphalt concrete crushed stone and mastic. The system of volumetric-functional design. Method for determining binder runoff
GOST R 58401.24-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Methods of temperature control
GOST R 58401.25-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Methods for the determination of shear strain (SST)
GOST R 58401.5-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. The system of volumetric-functional design. Acceptance rules
GOST R 58401.6-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Method for determining the degree of enveloping of aggregate grains with a bituminous binder
GOST R 58401.9-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Sample Reduction Methods
GOST R 58402.1-2019: General automobile roads. Mineral materials for the preparation of asphalt mixtures. The system of volumetric-functional design. Methods for determining the density and absorption of sand
GOST R 58402.2-2019: General automobile roads. Mineral materials for the preparation of asphalt mixtures. The system of volumetric-functional design. Method for determining mass loss by sodium sulfate or magnesium sulfate
GOST R 58402.3-2019: General automobile roads. Mineral materials for the preparation of asphalt mixtures. The system of volumetric-functional design. Method for determining the content of crushed grains in gravel crushed stone
GOST R 58402.4-2019: General automobile roads. Mineral materials for the preparation of asphalt mixtures. The system of volumetric-functional design. Method for determining the number of voids in the sand
GOST R 58402.5-2019: General automobile roads. Mineral materials for the preparation of asphalt mixtures. The system of volumetric-functional design. Method for determining the density and voidness of crushed stone after baying
GOST R 58402.6-2019: General automobile roads. Mineral materials for the preparation of asphalt mixtures. The system of volumetric-functional design. Method for determining the density and absorption of crushed stone
GOST R 58402.7-2019: General automobile roads. Mineral materials for the preparation of asphalt mixtures. The system of volumetric-functional design. Method for determination of Rigden voids in mineral powder
GOST R 58402.8-2019: General automobile roads. Mineral materials for the preparation of asphalt mixtures. The system of volumetric-functional design. Methods for determining the maximum density of mineral powder
GOST R 58406.10-2020: Automobile roads for general use. Road asphalt concrete mixtures and asphalt concrete. Design rules
GOST R 58406.3-2020: Automobile roads for general use. Road asphalt concrete mixtures and asphalt concrete. Method for determination of rutting resistance by rolling a loaded wheel
GOST R 58406.4-2020: Automobile roads for general use. Road asphalt concrete mixtures and asphalt concrete. Preparation of sample slabs with a roller compactor
GOST R 58406.8-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Determination of resistance to plastic flow by the Marshall method
GOST R 58406.9-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Marshall gasket sample preparation method
GOST R 58407.1-2020: Automobile roads for general use. Mineral materials. Sand sampling methods
GOST R 58407.2-2020: General automobile roads. Mineral materials. Crushed stone sampling methods
GOST R 58407.3-2020: General automobile roads. Mineral materials. Mineral Powder Sampling Methods
GOST R 58770-2019: General automobile roads. Mixtures of crushed stone and sand slag. Technical specifications
GOST R 70037-2022: Public roads. Geosynthetic materials. Test methods for determining the pulling resistance of geosynthetic materials from the ground
GOST R 70197.2-2022: Public roads. Organomineral cold mixtures using secondary asphalt concrete. Test methods
GOST R 70243-2022: Public roads. Petroleum bituminous binder materials. Methods of aging in a thin layer
GOST R 70457-2022: Public roads. Soils. Method for determining the Californian number (CBR) to assess the bearing capacity of soil
GOST R 70614-2022: Ships and Marine Technology. Prevention of asbestos emission and exposure during ship recycling. Main Provisions
GOST R 70647-2023: Public roads. Protective layers and wear layers of road pavements. General requirements for technological processes
ODM 218.3.047-2015: Guidelines for the determination of low-temperature characteristics of asphalt concrete
ODM 218.3.063-2016: Recommendations on the selection of bitumen binders based on the determination of their rheological properties to increase the resistance to the formation of asphalt concrete
ODM 218.3.096-2017: Guidelines for the volumetric design of asphalt mixtures according to the Marshall Methodology
ODM 218.3.097-2017: Guidelines for determining the resistance of compacted asphalt concrete mixtures to plastic flow at a Marshall installation (on samples with a diameter of 152.4 mm)
ODM 218.3.098-2017: Guidelines for testing compacted asphalt mixtures by rolling a loaded wheel according to the Hamburg method
ODM 218.3.108-2019: Guidelines for the application of various methods of compaction of asphalt mixtures in the laboratory
ODM 218.4.038-2017: Guidelines for the acceptance of coatings from dense asphalt concrete mixtures, designed by the volumetric method
ODM 218.5.008-2019: Guidelines for the preparation of asphalt concrete samples with a rotary compactor (gyrator)
PNST 106-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of bulk density
PNST 107-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of bulk density, using paraffined samples
PNST 108-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of air voids content
PNST 109-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt concrete. Method for determination of resistance to plastic flow of cylindrical samples at Marshall installation
PNST 110-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method of preparation of cylindrical specimens using Marshall installation
PNST 111-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt concrete. Method of the thermostating
PNST 112-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt concrete. Method of sample preparation by rotary seal (Gyrator)
PNST 113-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt concrete. Method for determination of water resistance and adhesion properties
PNST 114-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Technical requirements for volumetric design method according to Superpave methodology
PNST 115-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Design method of volumetric composition according to Superpave methodology
PNST 121-2016: Automobile roads of general use. The mineral materials for the preparation of asphalt mixtures. Method of sampling
PNST 122-2016: Automobile roads of general use. Mineral materials for preparing asphalt mixtures. Method for determination of Rigden voids in mineral powder
PNST 123-2016: Automobile roads of general use. The mineral materials for the preparation of asphalt mixtures. Method for determination of loss of mass under the action of sodium sulfate or magnesium sulfate
PNST 124-2016: Automobile roads of general use. The mineral materials for the preparation of asphalt mixtures. Method for determination of bulk density and the emptiness
PNST 125-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for preparation of cylindrical specimens for determining dynamic modulus
PNST 126-2016: Automobile roads of general use. Asphalt concrete mixtures stone mastic. Method for determination of draindown binder
PNST 127-2016: Automobile roads of general use. Asphaltic concrete mixtures stone-mastic. Technical requirements for the method of volume designing
PNST 128-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the dynamic modulus, the number of the flow of hot asphalt mixes using the setup for performance test (AMPT)
PNST 129-2016: Automobile roads of general use. Asphaltic concrete mixtures stone-mastic. Method volume design
PNST 130-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for the determination of shear deformation
PNST 131-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determining the density of the place of application with a gamma densitometer
PNST 133-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of the dynamic modulus
PNST 134-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the internal angle of rotation of the rotary seal to the Superpave (SGC)
PNST 135-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the fatigue strength under repeated bending
PNST 179-2016: Road hot asphalt mixtures and asphalt concrete. Method for determination of bending tensile strength and ulimate relative tensile strain
PNST 179-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Method for determining tensile strength in bending and ultimate tensile strength
PNST 180-2016: Automobile roads of general use. Road hot asphalt mixtures and asphalt concrete. Method for determination of abrasion
PNST 180-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Abrasion Determination Method
PNST 181-2016: Automobile roads of general use. Road hot asphalt mixtures and asphalt concrete. Method for determining the resistance to rutting by rolling a loaded wheel
PNST 181-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Method for determining resistance to rutting by rolling a loaded wheel
PNST 182-2016: Automobile roads of general use. Road hot asphalt mixtures and asphalt concrete. Method of determining the effect of anti-icing reagents
PNST 182-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Method for determining the effect of deicing reagents
PNST 185-2016: Automobile roads of general use. Automobile roads of general use. Road not asphalt mixtures and asphalt concrete. Preparation of sample-plates by roller compactor
PNST 185-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Preparation of sample plates by roller compactor
PNST 244-2017: Automobile roads of general use. Recycled asphalt pavement (RAP). Specifications
PNST 244-2019: General automobile roads. Recycled Asphalt Concrete (RAP). Technical specifications
PNST 246-2017: Automobile roads of general use. Petroleum bituminous binding materials. Method for isolation of bituminous binder using a rotary evaporator
PNST 268-2018: Automobile roads of general use. Geosynthetic materials for slope erosion control. General specifications
PNST 269-2018: Automobile roads of general use. Geosynthetic materials for road construction. Method for determination of filtration coefficient for the system «soil-geosynthetic material-soil»
PNST 318-2018: General automobile roads. Geosynthetic materials. Durability Test Methods
PNST 323-2019: General automobile roads. Soils. California Number Determination Method (CBR) for Estimating Soil Load Capacity
PNST 324-2019: General automobile roads. Soils. Determination of optimum humidity and maximum density by the Proctor method
PNST 362-2019: General automobile roads. Cold asphalt mixes and asphalt mixes. Technical conditions
PNST 377-2019: General automobile roads. Bituminous petroleum binders. Method for visualizing polymer dispersion using fluorescence microscopy
PNST 396-2020: Automobile roads for general use. Oil bitumen binders. Thin layer aging techniques
PNST 398-2020: General automobile roads. Bituminous petroleum astringent materials. Method for determining the strain energy
PNST 399-2020: General automobile roads. Bituminous petroleum astringent materials. Method for determination of shear deformations
PNST 400-2020: Automobile roads for general use. Oil bitumen binders. Rotary method for determining elasticity
PNST 71-2015: Automobile roads of general use. Mineral materials for preparing fine-grained asphalt concrete mixtures. Method for determination of density and absorption
PNST 72-2015: Automobile roads of general use. The mineral materials for preparation of asphalt mixtures. The method of determining moisture content
PNST 73-2015: Automobile roads of general use. Fine-grained mineral materials for preparing asphalt mixtures. Method for determination of the void volume
PNST 74-2015: Automobile roads of general use. Materials coarse mineral for the preparation of asphalt mixtures. The method of determining of crushed grains
PNST 75-2015: Automobile roads of general use. Mineral materials for the preparation of asphalt mixtures. The method of determining grain composition
PNST 76-2015: Automobile roads of general use. The mineral materials for the preparation of asphalt mixtures. The method of determining the content of silt particles by washing
PNST 77-2015: Automobile roads of general use. Mineral materials for preparing asphalt mixtures. Method for determination of the maximum destiny of mineral powder
PNST 78-2015: Automobile roads of general use. Mineral materials for preparing coarse-grained asphalt concrete mixtures. Method for determination of density and absorption
PNST 79-2016: Automobile roads of general use. Viscous petroleum road bitumens. The method determining of the flexural creep stiffness using the bending beam rheometer (BBR)
PNST 81-2016: Automobile roads of general use. Petroleum-based bitumen binders. The method determining of the fatigue characteristics
PNST 82-2016: Automobile roads of general use. Binding petroleum bituminous material. Technical requirements based on traffic loads
PNST 83-2016: Automobile roads of general use. Petroleum-based bitumen binders. The method determining of the temperature of cracking using the device ABCD
PNST 84-2016: Automobile roads of general use. Viscous petroleum road bitumens. Method of aging under the action of pressure and temperature (PAV)
PNST 85-2016: Automobile roads of general use. Binding materials petroleum bituminous. Technical requirements based on temperature range of exploitation
PNST 87-2016: Automobile roads of general use. Viscous petroleum road bitumens. The method determining of the properties using a dynamic shear rheometer (DSR)
PNST 88-2016: Automobile roads of general use. Petroleum-based bitumen binders. The method determining of the properties of recovery via impacts multiple shear stress (MSCR) using dynamic shear rheometer (DSR)
PNST 89-2016: Automobile roads of general use. Petroleum-based bitumen binders. The method of determining the low temperature properties using dynamic shear rheometer (DSR)
PNST 90-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method of sampling
PNST 91-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method of reducing samples
PNST 92-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of maximum density
PNST 93-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Determination of binder content by ignition method
PNST 94-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Determination of binder content by extraction method
PNST 95-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determining the degree of coating grains of aggregate by asphalt binder
PO 1.3.2.13.1054-2015: The management system for the provision of personal protective equipment for employees of Rosenergoatom Concern JSC
ST RK 2823-2016: Industrial explosives Poremit-1. Technical conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.