GOST 25607-2009
ГОСТ 25607-2009
|
|
Crushed stone-sandy mixtures for road and airfield surfacing and bases. Specifications
Смеси щебеночно-гравийно-песчаные для покрытий и оснований автомобильных дорог и аэродромов. Технические условия
Status: Effective - Supersedes. IUS 8-2010
This standard applies to ready crushed-sand, gravel-sand and black-gravel-sand mixtures used for the installation of coatings, bases and additional layers of foundations of highways and bases of airfields and strengthening roadsides of roads, as well as rubble used for making foundations by the way of casting. This standard does not apply to aggregates for heavy and fine-grained concrete, asphalt concrete mixtures and ready-made mixtures for bases and coatings treated with inorganic and organic binding materials.
Настоящий стандарт распространяется на готовые щебеночно-песчаные, гравийно-песчаные и щебеночно-гравийно-песчаные смеси, применяемые для устройства покрытий, оснований и дополнительных слоев оснований автомобильных дорог и оснований аэродромов и укрепления обочин автомобильных дорог, а также на щебень, применяемый для устройства оснований по способу заклинки. Настоящий стандарт не распространяется на заполнители для тяжелого и мелкозернистого бетона, асфальтобетонных смесей и готовые смеси для оснований и покрытий, обработанные неорганическими и органическими вяжущими материалами
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
4/22/2010
SKU: RUSS67611
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.68 Road materials »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.1 Testing and control of products of mining and non-metallic industry »
4.1.2 Non-metallic minerals, materials and products »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
National standards »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh18 Road materials »
As a Replacement Of:
GOST 25607-94: Crushed stone-gravel-sandy mixtures for road and airfield surfacing and bases. Specifications
The Document References:
GOST 1.0-2015: Interstate system for standardization. Basic principles
GOST 22733-2002: Soils. Laboratory method for determination of maximum density.
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 25584-90: Soils. Laboratory methods for determination of filtration factor
GOST 25607-94: Crushed stone-gravel-sandy mixtures for road and airfield surfacing and bases. Specifications
GOST 28622-90: Soils. Laboratory method for determination of frost-heave degree
GOST 29329-92: Balance for static weightings
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 3344-83: Slag crushed stone and slag sand for road construction. Specifications
GOST 5180-84: Soils. Laboratory methods for determination
GOST 6613-86: Square meshed woven wire gauzes
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8735-88: Sand for construction work. Testing methods
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
MSN 10-01-2012: System of interstate normative documents in construction. Basic principles
The Document is Referenced By:
GOST 23735-2014: Sandy-gravel mixtures for construction work. Specifications
GOST 25592-2019: Ashes and slag mixtures of thermal power plants for concrete. Technical conditions
GOST 31424-2010: Non-metallic construction materials from sifting of crusting solid stone in aggregate manufacturing. Specifications
GOST 32495-2013: Aggregates, fines and its mixtures made from recycled reinforced and non-reinforced concrete. Specifications
GOST R 56708-2015: Polymer hexagonal geogrid. Specifications
GOST R 58818-2020: Automobile roads with low traffic intensity. Design, construction and calculation
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.056-2015: Guidelines for the design of non-rigid pavements in terms of exposure to heavy freight traffic (for highways I-II categories)
ODM 218.2.057-2015: Recommendations for use on bridges for drainage trays made of polymer composite materials
ODM 218.2.065-2015: Guidelines for increasing the service life of non-rigid pavements between repairs
ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads
ODM 218.2.086-2019: Guidelines for geocryological forecasting of the stability of road structures in the design, construction and operation of roads
ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes
ODM 218.2.095-2019: Guidelines for the design of subgrade permafrost using local soils
ODM 218.3.030-2013: Method for calculating reinforced cement concrete pavements of roads and airfields on fortified bases
ODM 218.3.032-2013: Guidelines for strengthening the structural elements of roads by spatial geogrids
ODM 218.3.043-2015: Guidelines for the use of natural belite sludge in the pavement layers
ODM 218.3.046-2015: Recommendations about technology of repair of water throughput pipes with use of composite materials
ODM 218.3.051-2015: Recommendations for determining the stress-strain state of multilayer pavements
ODM 218.3.060-2015: Guidelines for the repair of pavements consisting of cement concrete pavements, covered with asphalt concrete pavements, on public roads
ODM 218.3.075-2016: Recommendations for quality control of road construction using GPR
ODM 218.3.112-2019: Guidelines for the development and approval of technological regulations for production at the enterprises of the road sector
ODM 218.3.119-2019: Guidelines for the use of non-rigid road pavement with bases made of reinforced or knitted stone materials and soils
ODM 218.4.009-2017: Methodological recommendations on dust removal technology for roads with transitional type of coating using bitumen emulsion
ODM 218.8.008-2017: Guidelines for the use of treatment facilities made of polymer composite materials in the road sector
ODM 218.8.009-2017: Methodological recommendations on dust removal technology for roads with transitional type of coating using bitumen emulsion
PNST 265-2018: Automobile roads of general use. Flexible pavement design
RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas
RMD 32-18-2016 St. Petersburg: Recommendations for the use of paving in the construction of pavements for residential and public and business buildings
SP 121.13330.2012: Aerodromes
SP 243.1326000.2015: Design and construction of low-volume roads
SP 288.1325800.2016: Forest roads. Rules of design and construction
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 37.13330.2012: Industrial transport
SP 46.13330.2012: Bridges and pipes
SP 472.1325800.2019: Armor-based systems of bridges and retaining walls on highways. Design rules
SP 78.13330.2012: Automobile roads
SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
