GOST R ISO 10683-2013
ГОСТ Р ИСО 10683-2013
|
|
Fasteners. Non-electrolytically zinc flake coatings
Изделия крепежные. Неэлектролитические цинк-ламельные покрытия
Status: Effective - Introduced for the first time. IUS 2-2015
This standard establishes the requirements for layer thickness, corrosion resistance, as well as the mechanical and physical properties of non-electrolytically applied zinc-lamella coatings on steel fasteners with metric threads.
Настоящий стандарт устанавливает требования к толщине слоя, коррозионной стойкости, а также к механическим и физическим свойствам неэлектролитически нанесенных цинк-ламельных покрытий на крепежные изделия из стали с метрической резьбой
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/8/2013
SKU: RUSS67624
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.2 Fasteners »
Standards for pipe fittings (TPA) »
10. Production »
10.7 Coatings »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.01 Fasteners in general »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.01 Fasteners in general »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
25.220.40 Metal coatings »
National standards »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
25.220.40 Metal coatings »
The Document is Replaced With:
GOST R ISO 10683-2020: Fasteners. Non-electrolytic zinc lamella coating systems
The Document References:
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests
GOST R 53269-2009: Fire equipment. Helmets for fire-fighters. General technical requirements. Test methods
GOST R ISO 15330-2010: Fasteners. Preloading test for the detection of hydrogen embrittlement. Parallel bearing surface method
GOST R ISO 3269-2009: Fasteners. Acceptance inspection
GOST R ISO 898-1-2011: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread
GOST R ISO 8991-2011: Fasteners. Designation system
The Document is Referenced By:
GOST 32484.3-2013: High-strength structural bolting assemblies for preloading. System HR - Hexagon bolt and nut assemblies
GOST 32484.4-2013: High-strength structural bolting assemblies for preloading. System HV - Hexagon bolt and nut assemblies
GOST 32484.5-2013: High-strength structural bolting assemblies for preloading. Plain washers
GOST 32484.6-2013: High-strength structural bolting assemblies for preloading. Plain chamfered washers
GOST ISO 10511-2016: Prevailing torque type hexagon thin nuts (with non-metallic insert)
GOST ISO 10512-2016: Prevailing torque type hexagon nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6, 8 and 10
GOST ISO 10513-2016: Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread. Property classes 8, 10 and 12
GOST ISO 12126-2016: Prevailing torque type all-metall hexagon nuts with flange with metric fine pitch thread, style 2. Product grades A and B
GOST ISO 14579-2015: Bolts with cylindrical head and star-type internal socket button
GOST ISO 14583-2015: Screws with rounded head and star-shaped recession for wrench
GOST ISO 3269-2015: Fasteners. Acceptance inspection
GOST ISO 4033-2014: Hex Nuts high (type 2). Precision classes A and B
GOST ISO 4034-2014: Hex Nuts, normal (type 1). Precision class C
GOST ISO 4035-2014: Nuts hexahedral, low, chamfered (type 0). Precision classes A and B
GOST ISO 4036-2014: Nuts, hexagonal, low without bevel (type 0). Accuracy class B
GOST ISO 4162-2014: Hexagonal bolts with reduced head with flange. Precision class A to class of precision B
GOST ISO 7042-2016: Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12
GOST ISO 7043-2014: Nuts Hex high self-stopped with flange (with non-metallic insert), type 2. Precision classes A and B
GOST ISO 7044-2016: Prevailing torque type all-metall hexagon nuts with flange, style 2. Product grades A and B
GOST ISO 7051-2014: Self-tapping screws with countersunk head and cross recess
GOST ISO 7092-2016: Plain washers. Small series. Product grade A
GOST ISO 7093-1-2016: Plain washers. Large series. Part 1. Product grade A
GOST ISO 7093-2-2016: Plain washers. Large series. Part 2. Product grade C
GOST ISO 7380-2-2014: Round head screw. Part 2. Round head screw with hexagon socket and rim
GOST ISO 7720-2014: Hex nuts, high, self-stopping, all metal (Type 2). Strength class 9
GOST ISO 8674-2014: Nuts hexahedral high (type 2) with a fine-pitch thread. Precision classes A and B
GOST ISO 8675-2014: Nuts hexahedral low chamfered (type 0) with fine pitch thread. Precision classes A and B
GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch
GOST ISO 8992-2015: Fasteners. General requirements for bolts, screws, studs and nuts
GOST R 52854-2020: Automotive vehicles. Star head bolts with small flange
GOST R 55739-2013: Hexagon bolts with flange
GOST R 55742-2013: Screws with cylindrical head and large star-type internal socket
GOST R ISO 10509-2013: Hexagon flange head tapping screws
GOST R ISO 10644-2017: Screws with washers assembly, manufactured of steel, with flat washers. Washers of hardness classes 200 HV and 300 HV
GOST R ISO 1479-2013: Hexagon head tapping screws
GOST R ISO 1481-2013: Slotted pan head tapping screws
GOST R ISO 1482-2013: Slotted countersunk head tapping screws
GOST R ISO 1483-2013: Slotted raised countersunk head tapping screws
GOST R ISO 15072-2013: Hexagon flange reduced head bolts with fine pitch thread. Product grade A
GOST R ISO 4026-2013: Hexagon socket set screws with flat point
GOST R ISO 4027-2013: Hexagon socket set screws with cone point
GOST R ISO 4028-2013: Hexagon socket set screws with dog point
GOST R ISO 4029-2013: Hexagon socket set screws with cup point
GOST R ISO 4766-2013: Slotted set screws with flat point
GOST R ISO 7045-2013: Pan head screws with type H or type Z cross recess. Product grade A
GOST R ISO 7046-2-2013: Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A. Part 2. Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
GOST R ISO 7048-2013: Cross-recessed cheese head screws
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
