GOST 10060-2012

ГОСТ 10060-2012

Concretes. Methods for the determination of frost-resistance

Бетоны. Методы определения морозостойкости

Status: Effective - Supersedes. IUS 5-2014

The standard applies to heavy, fine-grained, lightweight and dense silicate concretes, including road and airfield pavement concretes, concretes of structures operated under conditions of exposure to saline water, and establishes basic and accelerated methods for determining cold resistance.

Стандарт распространяется на тяжелые, мелкозернистые, легкие и плотные силикатные бетоны, в том числе на бетоны дорожных и аэродромных покрытий, бетоны конструкций, эксплуатирующихся в условиях воздействия минерализованной воды, и устанавливает базовые и ускоренные методы определения морозостойкости.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 24

Approved: Federal Agency for Technical Regulation and Metrology, 12/27/2012

SKU: RUSS67638

Price: $246.00

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » k.62 Concretes and mortars »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.3 Testing of products in construction »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »

As a Replacement Of:

GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements

GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance

GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing

GOST 10060.3-95: Concretes. Dilatometric rapid method for the determination of frost-resistance

GOST 10060.4-95: Concretes. Structure-mechanical rapid method for the determination of frost-resistance

The Document References:

GOST 1.0-2015: Interstate system for standardization. Basic principles

GOST 1.2-2015: Interstate System for Standardization. Interstate standards. Rules for development, taking over, renovation and cancellation

GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements

GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance

GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing

GOST 10060.3-95: Concretes. Dilatometric rapid method for the determination of frost-resistance

GOST 10060.4-95: Concretes. Structure-mechanical rapid method for the determination of frost-resistance

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 10181-2000: Concrete Mixtures Test method

GOST 10197-70: Stands and supports for measuring heads. Specifications

GOST 11098-75: Gauge callipers with reading arrangement. Specifications

GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.

GOST 22685-89: Moulds for making control specimens of concrete. Specifications

GOST 23732-2011: Water for concretes and cement mortars Technical specifications.

GOST 24104-2001: Laboratory scales. General technical requirements

GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures

GOST 4233-77: Reagents. Sodium chloride. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests

GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests

The Document is Referenced By:

GOST 12504-2015: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications

GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 13578-2019: Lightweight concrete panels on porous aggregates for the exterior walls of industrial buildings. General specifications

GOST 13579-2018: Сoncrete blocks for walls of basements. Specifications

GOST 17538-2016: Reinforced concrete constructions and products for lift shafts of residential buildings. Specification

GOST 18048-2018: Reinforced сoncrete sanitary cabins. Specifications

GOST 18979-2014: Reinforced concrete columns for multi-storey buildings. Specification

GOST 18980-2015: Reinforced concrete collar beams for multistory buildings. Specifications

GOST 19222-2019: Arbolit and products from it. General specifications

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 20054-2016: Concrete non-pressure pipes. Specifications

GOST 20213-2015: Reinforced concrete roof trusses. Specifications

GOST 20372-2015: Reinforced concrete rafter and longitudinal beams. Specifications

GOST 20425-2016: Concrete Tetrapod for Costal Protecting Installations

GOST 20910-2019: Concrete is heat-resistant. Technical specifications

GOST 22131-2016: Concrete towers for railway high voltage signal line of autoblock. Technical requirements

GOST 24099-2013: Decorative facing slabs on basis of natural stone. Specifications

GOST 24155-2016: High passengers platform reinforced concrete structures. Specifications

GOST 24547-2016: Reinforced concrete culvert sections under highway and railway embankments. Specifications

GOST 24893-2016: Reinforced concrete frame brace for industrial buildings. Specifications

GOST 25098-2016: Reinforced concrete panels for partitions in industrial and agricultural buildings. Specifications

GOST 25485-2019: Cellular concrete. General specifications

GOST 25628.1-2016: Reinforced concrete columns for single-storey industrial buildings. Specifications

GOST 25697-2018: Reinforced concrete slabs for balconies and loggias. General specifications

GOST 25820-2014: Lightweight aggregates concretes. Specifications

GOST 25912-2015: Prestressed reinforced concrete slabs for aerodrome pavement. Specifications

GOST 26134-2016: Concretes. Ultrasonic method of frost resistance determination

GOST 26633-2012: Heavy-weight and sand concretes. Specifications

GOST 26633-2015: Heavy-weight and sand concretes. Specifications

GOST 26992-2016: Reinforced purloins for roofing in industrial and agricultural buildings. Specifications

GOST 27006-2019: Concrete Rules for the selection of composition

GOST 27108-2016: Frame structures of reinforced concrete, prefabricated for multi-stored buildings with beams. Specification

GOST 28737-2016: Reinforced concrete foundation beams for buildings walls of industrial and agricultural enterprises. Specifications

GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency

GOST 31310-2015: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications

GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements

GOST 31914-2012: High-strength heavy-weight and fine-grane concrete for situ-casting structures. Rules for control and quality assessment

GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications

GOST 32488-2013: Exterior wall panels of claydite-concrete for residential and public buildings. Specificatiоns

GOST 32803-2014: Self-stressing concrete. General specifications

GOST 32942-2014: Pre-stressed reinforced concrete bars for turnouts. General specifications

GOST 32948-2014: Automobile roads of general use. Supports of road signs. Technical requirements

GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods

GOST 32956-2014: Public roads. Trays for road drainage. Methods of control

GOST 32962-2014: Automobile roads of general use. Kerb units. Control methods

GOST 33119-2014: Polymer composites constructions for foot-bridges. Specifications

GOST 33126-2014: Expanded clay concrete blocs. Specifications

GOST 33147-2014: Automobile roads of general use. Reinforced concrete slabs. Methods of testing

GOST 33320-2015: Ferro-concrete cross ties for railways. General specifications

GOST 33376-2015: Polymer composite deck sections for pedestrian and highway bridges and overbridges. General specifications

GOST 33384-2015: Public roads. Designing bridge structures. General requirements

GOST 33389-2015: Public roads. Deicing materials. Test methods

GOST 33929-2016: Concrete with polysterene aggregates. Specifications

GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work

GOST 6133-2019: Concrete wall stones. Technical conditions

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 6927-2018: Сoncrete slabs for wall facing. Technical requirements

GOST 8020-2016: Concrete and reinforced concrete structures for man-holes of sewerage, water supply and gas supply pipeline systems. Specification

GOST 8717-2016: Concrete and reinforced concrete steps. Specification

GOST 948-2016: Reinforced concrete jumpers for buildings with brick walls. Specification

GOST 9561-2016: Reinforced concrete multihollow panels for floors in buildings. Specifications

GOST 9818-2015: Reinforced concrete flights of steps and stair landings. General specifications

GOST R 56506-2015: Coarse-pored claydite-concrete heat insulating tiles. Specifications

GOST R 56589-2015: Claydite-concrete heating main chutes. Specifications

GOST R 56591-2015: Expanded claydite-plaster blocks. Specifications

GOST R 56600-2015: Reinforced concrete prestressed slabs for pavements of roads. Specifications

GOST R 56686-2015: Dry construction plaster mixes based on cement binder with use of ceramsite sand. Specifications

GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications

GOST R 57796-2017: Dry building mixes on cement binder with use of ceramsite sand for mortars. Specifications

GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications

GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions

GOST R 58411-2019: Flexible concrete slabs. Technical specifications

GOST R 58757-2019: Fiberglass products for the installation of decorative and facing elements of building facades. Technical specifications

GOST R 58818-2020: Automobile roads with low traffic intensity. Design, construction and calculation

GOST R 58895-2020: Concrete is chemically resistant. Specifications

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

ODM 218.2.057-2015: Recommendations for use on bridges for drainage trays made of polymer composite materials

ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges

ODM 218.2.059-2015: Recommendations for use on bridges, viaducts and tunnels of pedestrian decking (pavements) made of composite materials

ODM 218.2.076-2019: Recommendations on the use of composite structures for areas with extreme temperature conditions (below minus 40 degrees Celsius and above plus 40 degrees Celsius)

ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads

ODM 218.3.037-2014: Recommendations for monitoring the strength of cement concrete pavements and foundations of roads by sample

ODM 218.3.060-2015: Guidelines for the repair of pavements consisting of cement concrete pavements, covered with asphalt concrete pavements, on public roads

ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles

ODM 218.3.076-2016: Guidelines for the selection of soil stabilizers and soil mixtures for road construction

ODM 218.3.077-2016: Guidelines for justifying the parameters of design and technology in the repair of asphalt concrete pavements with layers of cement concrete

ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities

ODM 218.3.106-2018: The use of flexible concrete surface coatings to protect and strengthen roads

ODM 218.3.119-2019: Guidelines for the use of non-rigid road pavement with bases made of reinforced or knitted stone materials and soils

ODM 218.6.031-2018: Guidelines for improving the reliability of protective and fortifications in emergency situations and natural hazards

OST 32.72-97: Reinforced concrete slabs without ballast bridge bed for metal superstructures of railway bridges. General specifications

PNST 105-2016: Sulfur concrete mixtures and sulfur concrete. General specifications

PNST 309-2018: Roads are public. Bridges and pipes road. Technical requirements

PNST 326-2019: General automobile roads. Mixtures of crushed stone, gravel and sand, treated with inorganic binders. Technical specifications

Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation

SP 120.13330.2012: Subway systems

SP 122.13330.2012: Railway and highway tunnels

SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products

SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion

SP 243.1326000.2015: Design and construction of low-volume roads

SP 265.1325800.2016: Manifold for engineering networks

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 288.1325800.2016: Forest roads. Rules of design and construction

SP 313.1325800.2017: Roads in eternal permafrost regions. Rules of design and construction

SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85

SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 37.13330.2012: Industrial transport

SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work

SP 453.1325800.2019: Artificial high-speed railway lines. Design and construction rules

SP 46.13330.2012: Bridges and pipes

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion

SP 78.13330.2012: Automobile roads

SP 79.13330.2012: Bridges and culverts. Rules of examination and test

SP 80.13330.2016: River hydraulie engineering facilities

SP 83.13330.2016: Industrial furnaces and brick chimneys

SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations

STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization

Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00


RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!