GOST 23061-2012
ГОСТ 23061-2012
|
|
Soils. Methods for radioisotope measurement of density and humidity
Грунты. Методы радиоизотопных измерений плотности и влажности
Status: Effective
The standard applies to sandy and clay soils according to STB 943 and establishes methods for laboratory determination of the height of the capillary rise of water in soils during construction, reconstruction and repair of earthworks. The standard does not apply to sand and clay soils in a frozen state.
Стандарт распространяется на песчаные, глинистые, крупнообломочные и скальные грунты и устанавливает методы радиоизотопных измерений плотности и влажности при исследовании их свойств. Стандарт не распространяется на крупнообломочные валунные грунты,а также грунты, в которых содержание фракций размером более 100 мм превышает 20 %, и фосфоритосодержащие грунты с содержанием фосфоритов более 20 %.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/9/2012
SKU: RUSS67677
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.50 Foundations and foundations of buildings and structures »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.020 Earthworks. Excavation. Foundation construction. Underground work »
National standards »
93 CIVIL CONSTRUCTION »
93.020 Earthworks. Excavation. Foundation construction. Underground work »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh39 Test methods. Packaging. Marking »
As a Replacement Of:
GOST 23061-90: Soils. Methods for radioisotope measurement of density and humidity
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 19611-74: Moisture meters neutron. Types and basic parameters
GOST 21196-75: Neutron moisture meters
GOST 23061-90: Soils. Methods for radioisotope measurement of density and humidity
GOST 23740-79: Soils. Methods of laboratory determination of organic composition
GOST 25260-82: Rocks. Field test method by penetration logging
GOST 25932-83: Portable radioisotope soil and concrete moisture and density gauges. General specifications
GOST 5180-84: Soils. Laboratory methods for determination
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.442-81: State system for ensuring the uniformity of measurements. Moisture meters neutron. Methods and means of verification
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8731-87: Seamless hot-rolled steel tubes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 9567-75: Precision steel tubes. Range
GOST R 8.666-2009: State system for ensuring the uniformity of measurements. Moisture meters neutron. The method of verification
NRB 99: Radiation Safety Standards
SP 2.6.1.799-99: Main sanitary regulations to ensure radiation safety
The Document is Referenced By:
GOST 30672-2012: Soils. Field testing. General
GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
SP 151.13330.2012: Engineering site investigations for nuclear power plants construction
SP 305.1325800.2017: Buildings and structures. The rules of geotechnical monitoring under construction
SP 45.13330.2017: Earthworks, grounds and footings
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
