GOST 32488-2013
ГОСТ 32488-2013
|
|
Exterior wall panels of claydite-concrete for residential and public buildings. Specificatiоns
Панели стеновые наружные железобетонные из керамзитобетона для жилых и общественных зданий. Технические условия
Status: Effective - Introduced for the first time. IUS 3-2015
This standard applies to continuous single-layer and two-layer claydite concrete wall panels designed for the exterior walls of residential and public buildings, and establishes requirements for the physico-mechanical characteristics and dimensions of panels, materials used for their manufacture, acceptance rules, control methods. This standard is not extends: - to composite panels; - three-layer panels according to GOST 31310; - wall panels of rooms with wet mode; - filling window and door openings in panels
Настоящий стандарт распространяется на сплошные однослойные и двухслойные стеновые панели из керамзитобетона, предназначенные для наружных стен жилых и общественных зданий, и устанавливает требования к физико-механическим характеристикам и размерам панелей, материалам, применяемым для их изготовления, правила приемки, методы контроля.Настоящий стандарт не распространяется: - на составные панели; - трехслойные панели по ГОСТ 31310; - панели стен помещений с мокрым режимом; - заполнения оконных и дверных проемов в панелях
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/30/2013
SKU: RUSS67750
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
The Document References:
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
GOST 10181-2000: Concrete Mixtures Test method
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications
GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.2-78: Concretes. Method of determination of moisture content
GOST 12730.4-78: Concretes. Methods of determination of porosity parameters
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 17623-87: Concrete. Radioisotope method of average density determination
GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 21718-84: Building materials. Dielectric method of measurement of moisture
GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement
GOST 23009-78: Prefabricated concrete and reinforced concrete constructions and products. Symbols (marks)
GOST 23279-85: Welded reinforcing meshes for reinforced concrete structures and products. General specifications
GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 26254-84: Buildings and structures. Methods of determination of thermal resistance of enclosing structures
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 27005-86: Light-weight and cellular concretes. Rules of average density control
GOST 27296-87: Sound insulation of enclosing structures
GOST 28013-98: Mortars. General specifications
GOST 28089-2012: Wall masonry constructions. Test methods for bond strength of facing tiles with the base
GOST 28227-89: Basic environmental testing procedures. Part 2. Tests. Test Kd: Hydrogen sulphide test for contacts and connections
GOST 28277-89: Non-destructive testing. Welded joints. Electroradiography method. General requirements
GOST 28984-91: Modular size coordination in building engineering. Basic rules
GOST 30247.0-94: Elements of building constructions. Fire-resistance test methods. General requirements
GOST 30247.1-94: Elements of building constructions. Fire-resistance test methods. Load bearing and separating constructions
GOST 30403-96: Building structures fire hazard test method
GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 5802-86: Mortars. Test methods.
GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
The Document is Referenced By:
SP 355.1325800.2017: Frame construction prefabricated reinforced concrete one-storey industrial buildings. Rules of design
SP 356.1325800.2017: Prefabricated reinforced concrete frame constructions multi-storey buildings. Rules of design
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
