Petroleum products. Method for determination of kinematic viscosity and calculation of dynamic viscosity
Нефтепродукты. Метод определения кинематической и расчет динамической вязкости
Status: Not effective - Superseded. IUS 6-2001
The standard establishes a method for determining the kinematic viscosity of glass viscometer oil products, liquid at the test temperature, in which the shear stress is proportional to the strain rate (Newtonian fluids) and the calculation of dynamic viscosity.
Стандарт устанавливает метод определения кинематической вязкости стеклянным вискозиметромнефтепродуктов, жидких при температуре испытания, у которых напряжение сдвига пропорционально скорости деформации (ньютоновских жидкостей) и расчет динамической вязкости.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
7/16/1982
SKU: RUSS67752
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.2 Testing and control of products of fuel and energy industry »
4.2.2 Oil, oil products and gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
B Oil products »
B0 General rules and regulations for oil refining industry »
B09 Test methods. Packaging. Marking »
National Standards for OKSTU »
OIL, PETROLEUM PRODUCTS, GAS »
Control methods (testing, analysis, measurements) »
The Document is Replaced With:
GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
As a Replacement Of:
GOST 33-66: Petroleum products. Method for the determination of kinematic viscosity
The Document References:
GOST 112-78: Meteorological glass thermometers
GOST 12026-76: Filter paper for laboratory application
GOST 13646-68: Glass mercury thermometers designed for precise measurements
GOST 14710-78: Petroleum toluene
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 2517-85: Crude oil and petroleum products. Methods of sampling
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 2603-79: Reagents. Acetone. Specifications
GOST 28498-90: Liquid-in-glass thermometers
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 3900-85: Petroleum and petroleum products. Method for determination of density
GOST 400-80: Glass thermometers for testing of petroleum products. Specifications
GOST 443-76: Benzene-solvent for rubber industry. Technical requirements
GOST 5789-78: Reagents. Toluene. Specifications
GOST 6824-76: Distilled glycerine. Specifications
GOST 8505-80: Nefras-C 50/170. Specifications
The Document is Referenced By:
GOST 10028-81: Glass capillary viscosimeters. Specifications
GOST 10534-78: Sulphonated additive CБ-3. Specifications
GOST 10585-75: Black oil fuel
GOST 10585-99: Oil fuel. Mazut. Specifications
GOST 10834-76: Hydrophobizing liquid 136-41. Specifications
GOST 10887-75: Silicoorganic damping fluids 132-30. Specifications
GOST 10916-74: Silicone insulating liquid 132-12D. Specifications
GOST 10957-74: Siliconorganic liquids 132-24 and 132-25. Specifications
GOST 11063-77: Motor oils containing additives. Method for determination of stabilization by inductive period of sedimentation
GOST 12261-87: Afk additive
GOST 13004-77: Polyethylsiloxane fluids. Specifications
GOST 13032-77: Polymethylsiloxane fluids. Specifications
GOST 14361-78: Oil ФM-5,6 AП for refrigerating machines. Specifications
GOST 15171-78: Additive АКОР-1. Specifications
GOST 15866-70: Organo-silicone fluid PFMS-4. Specifications
GOST 17.2.2.04-86: Gas-turbine engines of civil aviation airplanes
GOST 17108-86: Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement
GOST 17601-90: Marine centrifugal separators. Acceptance and methods of tests
GOST 18375-73: Lubricating oil 132-08. Specifications
GOST 18464-87: Hydraulic cylinders
GOST 18509-88: Tractor and combine diesel engines. Methods of bench tests
GOST 18613-88: Hydraulic fluid of grades 132-10 and 132-10Д. Specifications
GOST 1861-73: Compressor oils
GOST 19096-73: Dioctyl sebacate, thermostable. Specification
GOST 20302-74: Motor oils. Method of corrosion test for oils on engine 'Yas-204'
GOST 20303-74: Motor oils. Method of estimation of detergent characteristics of oils by installation ИМ-1
GOST 20734-75: Hydraulic fluid 7-50C-3. Specifications
GOST 20799-75: Industrial oils. Specifications
GOST 20944-75: Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
GOST 20991-75: Motor oils. Method of testing their tendency to form deposits at high temperatures
GOST 21046-86: Waste petroleum products
GOST 21490-76: Motor oils. Method of test detergent properties by the installation 'УИM-6-НАТИ'
GOST 21532-76: Horological lubricant PS-1. Specifications
GOST 22234-76: Polyester 24K. Specifications
GOST 23008-78: Shock absorber liquid AЖ-12т. Specifications
GOST 23497-79: Motor oils M-14B23 and M-20B2. Specifications
GOST 23639-79: Additive KP
GOST 25149-82: The liquid N7. Specifications
GOST 25371-97: Petroleum products. Calculation of viscosity index from kinematic viscosity
GOST 25821-83: Fluid PGV. Specifications
GOST 28091-89: Industrial burners for liquid fuel. Test methods
GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
GOST 3582-84: Medical vaseline. Specifications
GOST 5020-75: Liquid 'Steol-M'. Specifications
GOST 5774-76: Condenser vaselin. Technical requirements
GOST 6457-66: Oils МК-8. Specifications
GOST 6948-81: Foaming agent PО-1Specifications
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state
GOST 9070-75: Viscometers for determination of relative viscosity of paint and lacquer materials. Specifications
GOST 9972-74: Petroleum turbine oils with additives
GOST R 50588-93: Foaming agents for fire extinguishing. General technical requirements and test methods
GOST R 50984-96: Hydraulically operated portable emergency and rescue tools. Rams. Basic parameters and dimensions. Methods of testing
GOST R 50985-96: Hydraulically operated portable emergency and rescue tools. Combination cutters. Basic parameters and dimensions. Methods of testing
GOST R 50986-96: Hydraulically operated portable emergency and rescue tools. Jaw cutters. Basic parameters and dimensions. Methods of testing
GOST R 50987-96: Hydraulically operated portable emergency and rescue tools. Muscular operated pump unit. Basic parameters and dimensions. Methods of testing
GOST R 51330.7-99: Explosion-proof electrical apparatus. Part 6. Oil-filled "o" enclosures
GOST R 51544-2000: Hydraulically operated portable emergency and rescue tools. Spools with hydraulic lines. Basic parameters and dimensions. Methods of testing and control
GOST R 51546-2000: Hydraulically operated portable emergency and rescue tools. Spreader. Basic parameters and dimensions. Methods of testing and control
GOST R 51634-2000: Motor oils for autotractors. General technical requirements
GOST R IEC 60079-6-2012: Explosive atmospheres. Part 6. Equipment protection by oil-immersion «o»
GOST R ISO 6388-93: Surface active agents. Determination of flow properties using a rotational viscometer
MI 1740-87: State system for ensuring uniformity of measurements. Viscometer for determining the conditional viscosity of paints VZ-246. Method of verification
MI 2974-2006: State system of measuring uniformity provision. Class 2 piston-pipe calibration rigs. Verification method for class 1 piston-pipe calibration rig with comparator
MI 3200-2009: Recommendation. GSE. Mass of crude oil. Methods of measuring the system of measuring the amount and parameters of crude oil at the temporary loading point of the Bayandy field at the Chamber of Commerce and Industry Usinskneftegaz OOO Lukoil-Komi
MI 584-84: Guidelines. Turbine flow converters workers. Method of verification
NPB 203-98: Foaming Agents for Subsurface Fire Extinguishing in Petroleum and Petroleum Products Storage Tanks. General Technical Requirements. Test Methods
NPB 304-2001: Foam fire extinguishing concentrates. General technical requirements and test methods
OST 38.01197-80: Oils of USSR. Technological indexing.
OST 38.01445-88: Lubrication and cooling liquid MR-7. Technical conditions
OST 39-228-89: Water for flooding of oil reservoirs. Assessment of compatibility of injected water with formation water and productive stratum rock.
RD 153-34.0-04.202-98: Procedural Guidelines. Certification of Departments of Energy Facilities Performing Quantitative Chemical Analysis. Organization and Procedure
RD 153-34.1-11.354-2001: Recommended Practice for Design and Use of Special Orifice Devices for Measurement of Fuel Oil Consumption at Thermal Power Stations
RD 153-34.1-40.504-00: Procedural Guidelines for Optimal Corrosion Protection of Storage Tanks and Protection of the Water in Them Against Aeration
RD 153-34.1-43.106-2001: Model Guidelines for Acceptance, Storage, and Use of Fireresistant Turbine Oils Type OMTI
RD 153-39.4-042-99: Instructions on oil mass assessment oil metering with the use of oil quantity & quality assessment systems
RD 212.0182-02: Manual for technical operation of inland waterway vessels
RD 31.2.07-2001: Fuels, oils, lubricants and special liquids for ships of sea transport. Nomenclature and scope
RD 31.27.03-95: Fuels, oils, lubricants and special liquids for ships of sea transport. Nomenclature and scope
RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 34.01.203: Model Index of Operations Documentation for Chemical Shop of a Thermal Power Station
RD 34.09.604-89: Model Guidelines for Organization of Collection and Rational Use of Used Petroleum Products at Thermal and Hydroelectric Generating Stations, Electrical Networks, and Repair Facilities Administered by Minenergo USSR
RD 34.10.411-89: Ethanol consumption rates for organizations and enterprises of the USSR Ministry of Energy. Part 2
RD 34.10.558-84: Guidelines for the calculation of temporary flow rates of working fluids for hydraulic systems of construction vehicles operated by the USSR Ministry of Energy
RD 34.43.105-89: Procedural Guidelines for Use of Transformer Oils
RD 34.44.215-96: Methods for the Determination of Quality of Water-Fuel Oil Emulsions Used n the Form of Liquid Boiler Fuel
RD 34.45-51.300-97: Electrical equipment testing scope and standards.
RD 39-0147103-309-88: Provisions on the Procedure of Development, Coordination, and Approval of Technological Order (REGLAMENT) for Crude Oil Treatment Plants.
RD 39-3-944-83: Standard provision for a laboratory that performs oil analyzes during acceptance operations and produced water
RD 50-416-83: Methodological instructions. Glass capillary sample viscometers. Methods and means of verification.
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
TU 38.10195-86: Oil standard for rubber testing (SZHR)
TU 38-101937-83: Oil softener for the rubber industry
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.