imgalt

GOST R 50736-95

ГОСТ Р 50736-95

Antenna-feeder devices of systems of land mobile radiocommunication. Types, basic parameters, technical requirements and methods of measurements

Антенно-фидерные устройства систем сухопутной подвижной радиосвязи. Типы, основные параметры, технические требования и методы измерений

Status: Effective - Introduced for the first time. IUS 4-1995

This standard applies to antenna-feeder devices (AFU) designed to work with mobile radio stations in the very high frequencies from 30 to 300 MHz and sets the types, basic parameters, technical requirements and measurement methods. This standard may apply to AFU frequency ranges from 26 to 30 MHz and from 300 to 500 MHz

Настоящий стандарт распространяется на антенно-фидерные устройства (АФУ), предназначенные для работы с подвижными радиостанциями в диапазоне очень высоких частот от 30 до 300 МГц и устанавливает типы, основные параметры, технические требования и методы измерений. Настоящий стандарт может распространяться на АФУ диапазонов частот от 26 до 30 МГц и от 300 до 500 МГц

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of Russia, 2/7/1995

SKU: RUSS67799

Price: $381.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.15 Testing and control of products of electronic, optical and electrical industry » 4.15.2 Equipment and apparatus for radio, television and communication »

ISO classifier » 33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT » 33.120 Components and accessories of telecommunications equipment 712 » 33.120.40 Antennas »

National standards » 33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT » 33.120 Components and accessories of telecommunications equipment 712 » 33.120.40 Antennas »

National Standards for KGS (State Standards Classification) » Latest edition » E Electronic engineering, electronics and communications » E5 Communication equipment » E58 Antenna devices »

National Standards for OKSTU » RADIO COMMUNICATIONS, RADIO BROADCASTING AND TELEVISION » Antennas for radio communication, broadcasting and television »


The Document References:

GOST 12.1.006-84: Occupational safety standards system. Electromagnetic fields of radio frequencies. Permissible levels at work-places and requirements for control

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements

GOST 14192-77: Marking of cargoes

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16019-78: Radio stations for land mobile service. Requirements for mechanical and environmental resistance and test methods

GOST 23088-80: Electronic components. Requirements for package, transportation and test methods

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 28198-89: Basic environmental testing. Part 1. General and quidance

GOST 28199-89: Basic environmental, testing procedures. Part 2. Tests. Test A: Cold

GOST 28200-89: Basic environmental testing procedures. Part 2. Tests. Test B: Dry heat

GOST 28201-89: Basic environmental testing procedures. Part 2. Tests. Test Ca: Damp heat, steady state

GOST 28202-89: Basic environmental testing. Part 2. Tests. Test Sa: Simulated solar radiation at ground level

GOST 28203-89: Basic environmental testing procedures. Part 2. Tests. Test Fc and guidance: Vibration ( sinusoidal )

GOST 28204-89: Basic environmental testing procedures. Part 2. Tests. Test Ga and quidance: Acceleration, steady state

GOST 28205-89: Basic environmental testing procedures. Part 2. Tests. Guidance for solar radiation testing

GOST 28206-89: Basic environmental testing procedures. Part 2. Tests. Test J. and quidance: Mould growth

GOST 28207-89: Basic environmental testing procedures. Part 2. Tests. Test Ka: Salt mist

GOST 28208-89: Basic environmental testing procedures. Part 2. Tests. Test M: Low air pressure

GOST 28209-89: Basic environmental testing procedures. Part 2. Tests. Test N: Change of temperature

GOST 28210-89: Basic environmental testing procedures. Part 2. Tests. Test Q: Sealing

GOST 28211-89: Basic environmental testing procedures. Part 2. Tests. Test T: Soldering

GOST 28212-89: Basic environmental testing procedures. Part 2. Tests. Test U: Robustness of terminations and integral mounting devices

GOST 28213-89: Basic environmental testing prosedures. Part 2. Tests. Test Ea and guidance: Shock

GOST 28214-89: Basic environmental testing procedures. Part 2: Tests. Guidance for damp heat tests

GOST 28215-89: Basic environmental testing procedures. Part 2. Tests. Test Eb and quidance: Bump

GOST 28216-89: Basic environmental testing procedures. Part 2. Tests. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)

GOST 28217-89: Basic environmental testing. Part 2. Tests. Test Ec: Drop and Topple, primarily for equipment-type specimens

GOST 28218-89: Basic environmental testing procedures. Part 2. Tests. Test Ed: Free fall

GOST 28219-89: Basic environmental testing procedures. Part 2. Tests. Guidance on change of temperature tests

GOST 28220-89: Basic environmental testing procedures. Part 2. Tests. Test Fd: Random vibration wide band. General requirements

GOST 28221-89: Basic environmental testing procedures. Part 2. Tests. Test Fda: Wide band random vibration. High reproducibility

GOST 28222-89: Basic environmental testing procedures. Part 2. Tests. Test Fdb: Random vibration wide band. Reproducibility medium

GOST 28223-89: Basic environmental testing procedures. Part 2. Tests. Test Fdc: Random vibration, wide band. Reproducibility low

GOST 28224-89: Basic environmental testing procedures. Part 2. Test Z/AD. Composite temperature and humidity cyclic test

GOST 28225-89: Basic environmental testing procedures. Part 2. Tests. Test Z/AMD: Combined sequential cold, low air pressure and damp heat test

GOST 28226-89: Basic environmental testing procedures. Part 2. Tests. Test Kc: Sulphur dioxide test for contacts and connections

GOST 28227-89: Basic environmental testing procedures. Part 2. Tests. Test Kd: Hydrogen sulphide test for contacts and connections

GOST 28228-89: Basic environmental testing procedures. Part 2. Tests. Guidance on test T: Soldering

GOST 28229-89: Basic environmental testing procedures. Part 2. Tests. Test XA and guidance. Immersion in cleaning solvents

GOST 28230-89: Basic environmental testing. Part 2. Tests. Guidance to test Kd: Hydrogen sulphide test for contacts and connections

GOST 28231-89: Basic environmental testing procedures. Part 2. Tests. Mounting of components, equipment and other articles for dynamic tests including shock (Ea), bump (Eb), vibration (Fc and Fd) and steady-state acceleration (Ga) and guidance

GOST 28232-89: Basic environmental testing procedures. Part 2. Tests. Guidance on the application of the tests of IEC publication 68 to simulate the effects of storage

GOST 28233-89: Basic environmental testing procedures. Part 2. Tests. Guidance to test Kc: Sulphur dioxide test for contacts and connections

GOST 28234-89: Basic environmental testing procedures. Part 2. Tests. Test Kb: Salt mist, cyclic (sodium chloride solution)

GOST 28235-89: Basic environmental testing procedures. Part 2. Tests. Test Ta: Soldering. Solderability testing by the wetting balance method

GOST 28236-89: Basic environmental testing procedures. Part 3. Background information. Section 1. Cold and dry heat tests

The Document is Referenced By:

GOST R 51798-2001: Multiport antenna arrays for mobile telecommunication systems. Basic parameters, general technical requirements, methods of measurements

RD 45.298-2002: Equipment for analog trunked mobile radio systems. General technical requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Sponge titanium. Specifications
Language: English
Price: $79.00
imgalt
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Packaging. Determination of formaldehyde concentration in water and model environments
Language: English
Price: $217.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!