GOST R EN 1434-4-2006
ГОСТ Р ЕН 1434-4-2006
|
|
Heat meters. Part 4. Pattern approval tests
Теплосчетчики. Часть 4. Испытания с целью утверждения типа
Status: Not effective - Superseded. IUS 5-2013
The standard applies to single-channel heat meters intended for measuring thermal energy that is absorbed or given off in a water-heating system by a heat-carrying fluid, and establishes requirements for testing a heat meter for type approval. The standard does not establish safety requirements related to electrical appliances. The standard does not apply to heat meters with temperature sensors. Mounted on the surface of the piping water heating system.
Стандарт распространяется на одноканальные теплосчетчики, предназначенные для измерений тепловой энергии, которую поглощает или отдает в системах водяного теплоснабжения теплоносящая жидкость, и устанавливает требования к испытаниям теплосчетчика с целью утверждения типа. Стандарт не устанавливает требования безопасности, связанные с электроприборами. Стандарт не распространяе��ся на теплосчетчики с датчиками температуры. Монтируемыми на поверхности трубопроводов системы водяного теплоснабжения.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/1/2006
SKU: RUSS67886
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION II. METROLOGICAL »
II Measurements »
6 Thermophysical and temperature measurements »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.2 Instruments for measuring pressure, volume, flow, level, time and mechanical quantities »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.200 Thermodynamics and Temperature Measurements »
17.200.20 Temperature measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.200 Thermodynamics and Temperature Measurements »
17.200.20 Temperature measuring instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P1 Instruments for measuring pressure, volume, flow, level, time and fur »
P15 Flow meters and consumption meters »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T86 Measurement Techniques »
T86.1 Measurement of geometric quantities »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T86 Measurement Techniques »
T86.2 Measurement of mechanical quantities »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T86 Measurement Techniques »
T86.6 Thermophysical and temperature measurements »
The Document is Replaced With:
GOST R EN 1434-4-2011: Heat meters. Part 4. Pattern approval tests
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12.2.006-87: Safety of the electronic mains-connected and similar devices intended for everyday and similar general-purpose use
GOST 28199-89: Basic environmental, testing procedures. Part 2. Tests. Test A: Cold
GOST 28200-89: Basic environmental testing procedures. Part 2. Tests. Test B: Dry heat
GOST 28216-89: Basic environmental testing procedures. Part 2. Tests. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
GOST 6651-94: Thermal converters of resistance. General technical requirements and test methods
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50193.3-92: Measurement of water flow in closed conduits. Meters for cold potable water. Test methods and equipment
GOST R 50648-94: Electromagnetic compatibility of technical equipment. Immunity to power frequency magnetic field. Technical requirements and test methods
GOST R 51317.4.11-99: Electromagnetic compatibility of technical equipment. Immunity to dynamic changes of power supply voltage. Requirements and test methods
GOST R 51317.4.2-99: Electromagnetic compatibility of technical equipment. Immunity to electrostatic discharge. Requirements and test methods
GOST R 51317.4.3-99: Electromagnetic compatibility of technical equipment. Radiated, radio-frequency, electromagnetic field immunity. Requirements and test methods
GOST R 51317.4.4-99: Electromagnetic compatibility of technical equipment. Immunity to electrical fast transient/burst. Requirements and test methods
GOST R 51318.22-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance from information technology equipment. Limits and test methods
GOST R EN 1434-1-2006: Heat meters. Part 1. General requirements
GOST R IEC 61107-2001: Data exchange for meter reading, tariff and load control. Direct local data exchange
GOST R IEC 870-5-1-95: Telecontrol equipment and systems. Part 5. Transmission protocols. Section 1. Transmission frame formats
GOST R IEC 870-5-2-95: Telecontrol equipment and systems. Part 5. Transmission protocols. Section 2. Link transmission procedures
GOST R IEC 870-5-3-95: Telecontrol equipment and systems. Part 5. Transmission protocols. Section 3. General structure of application data
GOST R IEC 870-5-4-96: Telecontrol equipment and systems. Part 5. Transmission protocols. Section 4. Definition and coding of application information elements
GOST R IEC 870-5-5-96: Telecontrol equipment and systems. Part 5. Transmission protocols. Section 5. Basic application on functions
RMG 50-2002: Recommendations for application of references to standards in documentation and for indication of standard reference numbers in marking
The Document is Referenced By:
GOST R EN 1434-4-2011: Heat meters. Part 4. Pattern approval tests
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
