GOST 12.4.076-90

ГОСТ 12.4.076-90

Occupational safety standards system. Materials for special leather shoes. Quality characteristics nomenclature

Система стандартов безопасности труда. Материалы для специальной кожаной обуви. Номенклатура показателей качества

Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

The standard applies to natural, artificial and synthetic leather for the top, as well as natural leather and synthetic materials for the bottom of special shoes and sets the range of quality indicators for these materials. The nomenclature established by this standard should be used in the development of regulatory and technical documentation for materials for special leather shoes and the assessment of their quality.

Стандарт распространяется на натуральную, искусственную и синтетическую кожу для верха, а также натуральную кожу и синтетические материалы для низа специальной обуви и устанавливает номенклатуру показателей качества этих материалов. Установленная настоящим стандартом номенклатура должна применяться при разработке нормативно-технической документации на материалы для специальной кожаной обуви и оценке уровня их качества.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: Gosstandart of the USSR, 6/5/1990

SKU: RUSS67953

Price: $99.91




The Product is Contained in the Following Classifiers:

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » II Industrial sanitation and occupational health » 8 Personal protective equipment » 8.4 Legs, hands protection »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.340 Protective equipment » 13.340.50 Protective equipment for feet »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.340 Protective equipment » 13.340.50 Protective equipment for feet »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T51 Documentation system that determines indicators of quality, reliability and durability of products »


As a Replacement Of:

GOST 12.4.076-79: Occupational safety standards system. Materials for special footwear. Nomenclature of quality indices

The Document References:

GOST 10642-63: Sole leather. Method for determination of abrasive resistance in air-dry state

GOST 10656-63: Sole leather. Method for the determination of abrasive resistance in wet state

GOST 12.4.083-80: Occupational safety standards system. Special shoes soles. Method of determination of sliding friction factor

GOST 12.4.102-80: Safety standards system. Materials for special foot-wear uppers. Determination of liquid aggressive material permeability

GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification

GOST 12.4.129-83: System of safety standards. Materials for special foot-wear uppers. Method for determination of petrolеum and petrolеum products penetration

GOST 12.4.130-83: System of safety standards. Materials for special foot-wear uppers. Method for determination of petroleum and petroleum products resistance

GOST 12.4.145-84: Occupational safety standards system. Rubber for special shoes bottom. Method for determination of heat conduction

GOST 12.4.148-84: Occupational safety standards system. Materials for special foot-wear uppers. Method for determination of organic solvents resistance

GOST 12.4.149-84: Occupational safety standards system. Materials for special foot-wear uppers. Method for determination of organic solvent permeability

GOST 12.4.184-97: Occupational safety standards system. Fabrics and materials for industrial clothing, hand protection means and upper for safety shoes. Methods for determination of burning-through resistance

GOST 13662-77: Rubber for shoes bottom. Method for determination of heat resistance

GOST 13869-74: Chrome upper leather. Method for the determination of wet friction resistance

GOST 15162-82: Artificial leather and synthetic and film materials. Methods for the determination of frost proof in static conditions

GOST 17073-71: Artificial leather. Methods for the determination of thickness and mass of 1 sq m

GOST 17074-71: Artificial leather. Method for the determination of tear strength

GOST 17316-71: Artificial leather. Measuring method of tearing load and elongation of break

GOST 17317-88: Artificial leather. Method for determination of interlayer bonding strength

GOST 1903-78: Bottom leather. Shoulders and bellies. Specifications

GOST 22944-78: Artificial leather and film materials. Method for the determination of water penetrability

GOST 25937-83: Footwear materials. Method for determination of the specific volume and surface electrical resistivity

GOST 261-79: Rubber. Methods of determination fatigue life for repeated stretching

GOST 263-75: Rubber. Method for the determination of Shore A hardness

GOST 267-73: Rubber. Methods for the determination of density

GOST 270-75: Rubber. Method of the determination elastic and tensile stress-strain properties

GOST 27356-87: Synthetic materials for low soling. Method of determination of hardness under static bending

GOST 2891-78: Rubber for shoes bottom. Method for determination of pulling out pin resistance

GOST 2892-82: Rubber for shoes bottom. Method for determination of break resistance

GOST 30157.0-95: Textile fabrics. Methods of measures changes determination after wet treatments and chemical cleaning. General

GOST 3123-78: Leather production. Terms and definitions

GOST 3811-72: Textile materials. Textile fabrics, nonwoven fabrics and piece-articles. Methods for determination of linear dimensions linear and surface density

GOST 409-77: Plastics cellular and rubber cellular. Method for determination of apparent density

GOST 422-75: Rubber for shoes bottom. Methods of tests for repeated flexing

GOST 426-77: Rubber. Method for the determination of abrasion resistance under slipping

GOST 6768-75: Rubber and rubberized fabric. Method for determination of the bond strength at ply separation

GOST 7076-87: Building materials and products. Method of thermal conductivity determination

GOST 7912-74: Rubber. The method for the determination of brittle temperature

GOST 7926-75: Rubber for shoes bottom. The methods of testing

GOST 8847-85: Knitted fabrics. Methods for determination of breaking characteristics and extensibility under loads less than breaking loads

GOST 8971-78: Artificial leather, films and paperboard for shoes. Methods for the determination of hydroscopicity and moisture return

GOST 8972-78: Artificial leather. Methods for determination of wetting and shrinking

GOST 8977-74: Artificial leather and films. Methods for determination of flexibility, hardness and elasticity

GOST 8978-75: Artificial leather and films. Methods of determination of stability of repeated flexing

GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state

GOST 938.15-70: Leather. Method of measuring thickness of samples and thickness of leather in the standard point

GOST 938.1-67: Leather. Method of determination of moisture content

GOST 938.17-70: Leather. Method of the determination of the vapour penetration

GOST 938.18-70: Leather. Method of determination of air penetration

GOST 938.22-71: Leather. Method of determination of water penetration and water permeability under dynamic conditions

GOST 938.24-72: Leather. Method of the determination of water absorption

GOST 938.25-73: Leather. Method for determination of welding temperature

GOST 938.2-67: Leather. Method of determination of ash content

GOST 938.26-75: Leather. Test method for strength of pin fixation

GOST 938.27-76: Leather. Test methods of chap of the soft leathers face

GOST 938.28-77: Leather. Method of determination of hydrothermic stability

GOST 938.29-77: Leather. Method of determination for colour fastness to dry and to moist friction

GOST 938.3-77: Leather. Method of determination of chrome content

GOST 938.4-70: Leather. Method of calculation of some chemical characteristics which are not determined directly

GOST 938.5-68: Leather. Method of determination of the content of substances extracted with organic solvents

GOST 938.6-68: Leather. Method of determination of water soluble content

GOST 938.8-69: Leather. Method of determination PH value of CaCl extraction

GOST 9733.27-83: Textiles. Test method of colour fastness to crocking

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!