imgalt

GOST R 51164-98

ГОСТ Р 51164-98

Steel pipe mains. General requirements for corrosion protection

Трубопроводы стальные магистральные. Общие требования к защите от коррозии

Status: Effective - Introduced for the first time

The standard establishes general requirements for the protection of the outer surface of steel (low-carbon low-alloyed steels of a class not higher than K60) from underground and atmospheric corrosion, transporting natural gas, oil and petroleum products, and outlets from them, compressor, gas distribution, pumping and pumping stations, and also oil depots, head structures for oil and gas fields (including reservoirs and casing), underground gas storage facilities, gas treatment plants and eft, pipelines of thermal power plants connected to trunk pipelines (hereinafter referred to as pipelines), underground, underwater (with penetration into the bottom), ground (in embankment) and above-ground gaskets, as well as pipelines on the territory of other similar industrial sites. The standard does not apply to heat pipelines and pipelines laid in populated areas, collectors, buildings, permafrost soils and in water bodies without penetration into the bottom.

Стандарт устанавливает общие требования к защите от подземной и атмосферной коррозии наружной поверхности стальных (малоуглеродистые низколегированные стали класса не выше К60) магистральных трубопроводов, транспортирующих природный газ, нефть и нефтепродукты, и отводов от них, трубопроводов компрессорных, газораспределительных, перекачивающих и насосных станций, а также нефтебаз, головных сооружений нефтегазопромыслов (включая резервуары и обсадные колонны скважин), подземных хранилищ газа, установок комплексной подготовки газа и нефти, трубопроводов теплоэлектростанций, соединенных с магистральными трубопроводами (далее - трубопроводы), подземной, подводной (с заглублением в дно), наземной (в насыпи) и надземной прокладках, а также трубопроводов на территории других аналогичных промышленных площадок. Стандарт не распространяется на теплопроводы и трубопроводы, проложенные в населенных пунктах, коллекторах, зданиях, многолетнемерзлых грунтах и в водоемах без заглубления в дно.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of Russia, 4/23/1998

SKU: RUSS67984

Price: $348.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.4 For pipeline transport of oil and gas »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.10 Cast iron and steel pipes »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.10 Cast iron and steel pipes »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G18 Fittings and pipeline connections »


The Document References:

GOST 10821-75: Wire made of platinum and platinum-rhodium alloys for thermoelectric thermometers

GOST 11262-80: Plastics. Tensile strength test method.

GOST 112-78: Meteorological glass thermometers

GOST 12.0.004-90: Organization of training for labor safety. General rules

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.008-76: Occupational safety standards system. Biological safety. General requirements

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.004-75: Occupational safety standards system. Special machines and devices for pipe-line building. Safety requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.3.005-75: Painting works

GOST 12.3.008-75: Production of metallic and non-metallic inorganic coatings

GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements

GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification

GOST 12652-74: Electrotechnical glass-cloth-base laminate. Specifications

GOST 13073-77: Zinc wire

GOST 13518-68: Plastics. Method for determination of environmental stress-cracking resistance of polyethylene

GOST 14236-81: Polymer films. Tensile strength test method

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 14759-69: Adhesives. Method of determination of shear strength

GOST 15140-78: Paintwork materials. Methods for determination of adhesion

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16336-77: Polyethylene compositions for cable industry. Specifications

GOST 16337-77: High-pressure polyethylene. Specifications

GOST 16783-71: Plastics. Method of determining the brittleness temperature at squeezing the specimen folded up as a loop

GOST 16842-82: Industrial radio-interferences. Test methods for radio-interference sources

GOST 17299-78: Technical ethyl alcohol. Specifications

GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 17792-72: Standard reference silver-silver chloride saturate electrode of second class

GOST 18299-72: Paintwork materials. Method for determination of tensile strength, relative elongation at tear and modulus of elasticity

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 18599-2001: Polyethylene pressure pipes. Specifications

GOST 18599-83: Polyethylene pressure pipes

GOST 22042-76: Studs for smooth hole parts. Product grade B. Construction and dimensions

GOST 22261-94: Measuring instruments for electrical

GOST 23511-79: Industrial radio frequency interference generated by domestic electrical appliances used in residential buildings, or connected to domestic power sources

GOST 23932-90: Laboratory glassware and equipment. General specifications

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 2678-94: Rolled roofing and waterproof materials. Methods of testing

GOST 411-77: Rubber and glue. Methods for determination of metal bond strength at separation

GOST 4233-77: Reagents. Sodium chloride. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4650-80: Plastics. Methods for the determination of water absorption

GOST 6323-79: Polyvinyl chloride insulated cables

GOST 6433.2-71: Solid electrical insulating materials. Methods for evaluation of electrical resistance at d. c. voltages

GOST 6709-72: Distilled water. Specifications

GOST 7871-75: Aluminum and aluminium alloy welding wire

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.048-89: Unified system of corrosion and ageing protection. Technical items. Methods of laboratory tests for mould resistance

GOST 9.049-91: Unified system of corrosion and ageing protection. Polymer materials and their components. Methods of laboratory tests for mould resistance

GOST 9.050-75: Unified system of corrosion and ageing protection. Varnish-and-paint coatings. Laboratory test methods to mould resistance

GOST 9.052-88: Unified system of corrosion and ageing protection. Oils and greases. Laboratory test methods for mould resistance

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.602-89: Constructions, underground. General requirements for corrosion protection

GOST 9070-75: Viscometers for determination of relative viscosity of paint and lacquer materials. Specifications

The Document is Referenced By:

Decision 162: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis ensures compliance with the requirements of the technical regulations of the Eurasian Economic Union "On requirements for main pipelines for the transportation of liquid and gaseous hydrocarbons (TR EAEU 049/2020), and the list of international and regional (interstate) standards, and in their absence - national (state) standards that contain rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulation of the Eurasian Economic Union "On requirements for pipelines for the transportation of liquid and gaseous hydrocarbons (TR EAEU 049/2020) and conformity assessment of technical regulation objects

GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 34027-2016: Gas supply system. Gas main pipeline transportation. Mechanical safety. Assigning of safe operation life for linear part of gas main pipeline

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 34181-2017: Trunk pipelines for oil and oil products transportation. Technical diagnosis. Main principles

GOST 34182-2017: Oil and оil рroducts trunk pipeline transportation. Operation and maintenance. General principles

GOST 34597-2019: Anode grounding of installations of electrochemical protection against corrosion of underground metal structures. Methods for determining the biocorrosive aggressiveness of soils and their impact on underground metal structures

GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST R 52568-2006: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST R 52602-2006: Anticorrosive polymeric-asmol coating-tape "LIAM". Specifications

GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements

GOST R 54086-2010: Pressure regulators. General specifications

GOST R 54907-2012: Trunk pipelines for oil and oil products transportation. Technical diagnosis. Basic principles

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST R 55435-2013: Oil and oil products trunk pipeline transportation. Operation and maintenance. General principles

GOST R 55436-2013: Gas distribution systems. Coatings with extruded polyethylene on steel pipes. General technical requirements

GOST R 55892-2013: Objects of low-tonnage liquefied natural gas production and consumption. General technical requirements

GOST R 55989-2014: Trunk gas pipelines. Design standard for pressure over 10 MPa. Principal requirements

GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

GOST R 57385-2017: Trunk pipeline transport of oil and oil products. Construction of oil and oil products trunk pipelines. Thermal insulation of pipes and fittings

GOST R 57817-2017: Underground gas storage. Design standards

GOST R 57991-2017: Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications

GOST R 58216-2018: Oil and gas industry. Arctic operations. Marine Corrosion Protection

GOST R 58284-2018: Oil and gas industry. Marine field facilities and pipelines. General Requirements for Corrosion Protection

GOST R 58329-2018: Rules for the operation of main condensate pipelines and product pipelines

GOST R 58344-2019: Earthing switches and grounding devices for various purposes. General technical requirements for anode grounding of electrochemical corrosion protection installations

GOST R 58367-2019: Arrangement of oil fields on land. Technological design

GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications

GOST R 58617-2019: The main pipeline transport of oil and oil products. Capacities and tanks horizontal steel. General specifications

GOST R 58778-2019: Gas distribution systems. Gas distribution networks and gas consumption. Category 1a high pressure gas pipelines

GOST R 70379-2022: Trunk pipeline transport of oil and petroleum products. Oil and petroleum products vapor recovery unit of combined (adsorption-absorption) type. Technical specifications

Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

RD 02-01297858-00: Instructions for external insulation of shaped pipeline fittings and valve units with protective polyurethane coating of COPON HYCOTE type, produced by Company 165 E. WOOD, England.

RD 12-411-01: Guidelines for Operating Condition Diagnostics of Underground Steel Gas Lines

RD 1390-001-2001: Instructions for making-good procedures of fault places of factory polyethylene pipe coatings.

RD 153-39.4-039-99: Standards for the design of electrochemical protection of trunk pipelines and MN sites

RD 153-39.4-044-99: Rules of total overhaul of main oil product pipelines laid in the cities, settlements and entering the territory of tank farms and pumping stations

RD 153-39.4-056-00: Main crude pipeline. Operations rules.

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 153-39.4-091-01: Instructions for protection of urban underground pipelines from corrosion.

RD 153-39.4-113-01: Standards for technological design of main pipelines

RD 153-39.4-114-01: Rules for accident response and trouble shooting on trunk oil pipelines.

RD 153-39.4R-136-2002: The leading document. Provision on service of electrochemical protection of the main oil product objects.

RD 3-1297858-02: Instructions for external insulation with epoxy-polyurethane coating “UP-1000/FRUCS 1000A” in factory and field conditions, for valves, shaped fittings and separate pipeline sections.

RD 39R-00147105-025-02: Method for determining the residual life of insulating coatings of underground pipelines

RD 413160-02-01297858-03: Corrosion protection rules for stock-tank oil vessels and for dynamic and technological oil settling vessels

RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg

RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg

RMG 116-2011: State system for ensuring the uniformity of measurements. Tanks of main oil lines and oil storage depots. Maintenance operations and metrological assurance under operating conditions

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SP 125.13330.2012: Petroleum product pipelines laid through cities and public areas

SP 245.1325800.2015: Corrosion protection of communication and utility lines and structures in the oil and gas industry. Production and work acceptance rules

SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines

SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling

SP 36.13330.2012: Trunk pipelines

SP 378.1325800.2017: Offshore pipelines. Design and construction rules

SP 392.1325800.2018: Pipelines trunk and field for oil and gas. Executive documentation during construction. Forms of requirements for maintenance and execution

SP 393.1325800.2018: Pipelines trunk and field for oil and gas. Organization of construction production

SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work

SP 410.1325800.2018: Pipelines trunk and field for oil and gas. Permafrost construction and work control

SP 424.1325800.2019: Pipelines trunk and field for oil and gas. Corrosion protection works by means of electrochemical protection and work execution control

SP 536.1325800.2024: Field pipelines of non-metallic pipes. Design and construction rules

SP 86.13330.2012: Main pipelines

SP 86.13330.2014: Main (Trunk) pipelines

SP 90.13330.2012: Thermal power stations

TU 1390-001-86695843-08: Steel pipes with a diameter of 57-1420 mm with an external two-layer and three-layer polyethylene coating

TU 1390-002-86695843-08: Steel pipes and parts of pipes with internal anti-corrosion coating based on highly viscous materials

TU 1390-004-86695843-2010: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anticorrosive polyethylene coating for the construction of trunk pipelines

TU 1390-005-86695843-2010: Steel pipes with outer anti-corrosion polyethylene coating for gas pipelines

TU 1390-007-32256008-05: External heat-insulating coating of pipes and fittings with a diameter of 57 ... 720 mm

TU 1390-007-86695843-2010: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anti-corrosion polyethylene coating for the construction of field and main oil pipelines

TU 1390-010-86695843-2011: Steel pipes and pipeline components welded with an internal anti-corrosion coating based on a paint material with high dry residue

TU 1390-014-86695843-2011: Steel pipes and parts of pipelines with external two-layer epoxy anticorrosion coating

TU 1390-015-86695843-2011: Steel pipes with Stelrant external anticorrosion polyurethane coating

TU 1390-016-86695843-2011: External epoxy coating for pipes. Technical conditions

TU 1394-006-86695843-10: Steel pipes with epoxy protective coating

TU 1394-011-86695843-2011: Steel pipes with an external two-layer epoxy coating resistant to ultraviolet radiation. Technical conditions

TU 14-3R-37-2000: Steel electric-welded longitudinal pipes with a diameter of 102–1220 mm with an external protective coating based on extruded polyethylene. Technical conditions

TU 14-3R-67-2003: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anti-corrosion polyethylene coating for the construction of trunk pipelines. Technical conditions

TU 1469-006-01297858-02: Specifications cold bending curves from steel electric-welded pipes with diameters of 720-1020 mm with insulating coating for main pipelines

TU 146930-02-01297858-99: Specifications for the manufacture of cold-bend curves inserts from spiral-seam pipes for oil pipelines of Transneft, JSC

TU 146930-03-01297858-01: Specifications for the production of cold-bending branches from pipes with a diameter of 720-1020 mm for oil pipelines

TU 146930-08-01297858-05: Specifications for cold bending curves from steel electric-welded pipes with diameters of 530 and 1220 mm with insulating coating for main pipelines

TU 2245-010-44271562-2004: Tape, heat-shrinkable polyethylene radiation-modified "Therma-L"

TU 2245-017-44271562-2005: Polymer tape "Terma-P". Technical conditions

TU 2246-004-56755147-2006: Rock sheet polymer to protect the insulated surface of pipelines. Technical conditions

TU 2531-002-53597015-01: Face seal (rubber cuff) to protect the annular space at the junctions of main pipelines under roads and railways

TU 3742-011-34390194-2003: Check valves DN 100-1400 PN 8, 0 MPa; PN 12, 5 MPa; PN 16, 0 MPa. Technical conditions

TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines

TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines

VRD 39-1.10-006-2000*: Rules for the technical operation of gas pipelines

VRD 39-1.10-026-2001: Methods of assessing the actual situation and condition of underground pipelines

VRD 39-1.10-049-2001: Правила распространяются на эксплуатацию, реконструкцию и ремонт магистральных, межпромысловых и промысловых конденсатопродуктопроводов и отражают специфику транспорта стабильеого, нестабильного, деэтанизированного конденсата, широкой фракции легких углев

VRD 39-1.10-069-2002: Provisions on technical operation of gas distribution stations of gas mains

VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)

VRD 39-2.5-082-2003: Rules for the technical operation of gas filling stations for compressor stations

VSN 39-1.8-008-2002: Design of electrical insulating inserts for main and field pipelines

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English
Price: $79.00
imgalt
Armour clothes. Classification and general technical requirements
Language: English
Price: $189.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Food products. Methods for detection and quantity determination of coliformes
Language: English
Price: $169.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Hotels design
Language: English
Price: $1,698.24
imgalt
Railroad rails. General specifications
Language: English
Price: $1,813.00
imgalt
Potassium chloride
Language: English
Price: $159.00
imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!