GOST R 53148-2008
ГОСТ Р 53148-2008
|
|
Rotating electrical machines. Noise limits
Машины электрические вращающиеся. Предельные уровни шума
Status: Not effective - Canceled. Registration information 404-st dated 05/25/2015 (the official website of Rosstandart); IUS 1-2016
The standard establishes the maximum permissible levels of sound pressure and sound power, corrected by characteristic A, for rotating electrical machines, corresponding to GOST R 52776, in terms of cooling - GOST 20459, in terms of degree of protection - GOST 17494 and characterized by the following parameters: - performance normal, constant or alternating current, without special electrical, mechanical or acoustic modifications designed to reduce noise; - rated power from 1 to 5500 kW (or kV • A); - rotational speed of not more than 3750 minutes in art. minus 1. The standard establishes methods for measuring the sound power level of rotating electrical machines. The standard includes guidance for determining the noise level of asynchronous machines with a squirrel cage rotor powered by a converter. The standard does not apply to asynchronous motors equipped with converters. In this case, the use of IEC 60034-17 is recommended.
Стандарт устанавливает максимально допустимые уровни звукового давления и звуковой мощности, корректированные по характеристике А, для вращающихся электрических машин, соответствующих ГОСТ Р 52776, в части охлаждения - ГОСТ 20459, в части степени защиты - ГОСТ 17494 и характеризующиеся следующими параметрами: - исполнение нормальное, постоянный или переменный ток, без специальных электрических, механических или акустических доработок, направленных на снижение уровня шума; - номинальная мощность от 1 до 5500 кВт (или кВ•А); - частота вращения не более 3750 мин в ст. минус 1. Стандарт устанавливает методы измерения уровня звуковой мощности вращающихся электрических машин. Стандарт включает руководство по определению уровня шума асинхронных машин с короткозамкнутым ротором при питании от преобразователя. Стандарт не распространяется на асинхронные двигатели, укомплектованные преобразователями. В этом случае рекомендуется пользоваться МЭК 60034-17
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/18/2008
SKU: RUSS68021
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
004/2011 TR CU. About safety of low voltage equipment »
Regulations and standards (to TR CU 004/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
5 Protection against mechanical vibrations »
5.2 Acoustic noise »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.7 Machines and equipment for construction industry »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
National standards »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
29.160.01 Machines rotating in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
29.160.01 Machines rotating in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E6 Electric machines, transformers and converters »
E60 Classification, nomenclature and general rules »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 11929-87: Rotating electrical machinery. General test methods. Noise levels determinations
GOST 17494-87: Rotating electrical machines. Classification of degrees of protection provided by enclosures for rotating machines
GOST 20459-87: Rotating electrical machines. Means of cooling. Symbols.
GOST 27243-2005: Noise of machines. Determination of sound power levels using sound pressure. Comparison method in situ
GOST 30457.3-2006: Acoustics. Determination of sound power levels of noise sources using sound intensity. Part 3. Precision method for measurement by scanning
GOST 30457-97: Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points. Engineering method
GOST 30691-2001: Noise of machines. Declaration and verification of noise emission values
GOST 31273-2003: Noise of machines. Determination of sound power levels using sound pressure. Precision methods for anechoic and semi-anechoic rooms
GOST 31274-2004: Noise of machines. Determination of sound power levels using sound pressure. Precision methods for reverberation rooms
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
GOST R 51400-99: Noise of machines. Determination of sound power levels using sound pressure. Engineering methods for small, movable sources in reverberant fields for hard - walls test rooms and for special reverberation test rooms
GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
GOST R 52776-2007: Rotating electrical machines. Rating and performance
The Document is Referenced By:
GOST 2582-2013: Rotating electrical traction machines for rail and road vehicles. General technical specifications.
GOST 31606-2012: Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical requirements
GOST R 53471-2009: Synchronous three-phase generators of power above 100 kW. General specifications
GOST R 54418.22-2014: Renewable power engineering. Wind power engineering. Wind turbine. Part 22. Conformity testing and certification
GOST R 54466-2011: Rotating electrical machines. Asynchronous explosion-proof motors of power from 0,25 to 400 kW inclusive. General technical requirements and test methods
GOST R 55136-2012: Rotating electrical machines. Part 25. Guidance for the design and performance of a.c. motors specifically designed for converter supply
GOST R 55882.1-2013: Electric equipment for rolling stock. Part 1. General service conditions and general rules
GOST R IEC 61800-1-2012: Adjustable speed electrical power drive systems. Part 1. General requirements. Rating specifications for low voltage adjustable speed d.c. power drive systems
GOST R IEC 61800-2-2012: Adjustable speed electrical power drive systems. Part 2. General requirements. Rating specifications for low voltage adjustable frequency a.c. power drive systems
GOST R IEC 61800-4-2012: Adjustable speed electrical power drive systems. Part 4. General requirements. Rating specifications for a.c power drive systems above 1000 V a.c. and exceeding 35 kV
|
Customers Who Viewed This Item Also Viewed:
 |
Plates of all-cast steel and iron moulding boxes. Construction and dimensions
Language: English |
Casting magnesium alloys. Grades
Language: English |
Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of predicting the change of properties burning heat ageing
Language: English |
State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods
Language: English |
Verification of purchased product. Organization and methods of control
Language: English |
Rubber and rubber-fabric sheets. Specifications
Language: English |
Crude petroleum. General specifications
Language: English |
Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
Language: English |
Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
Language: English |
Railway rolling stock. Requirements for protection against electrical hazards
Language: English |
Parts and elements of steam and hot water pipelines and production pipelines of nuclear power stations from the steel of perlite class for pressure up to 2, 2 MPa (22 kgf/cm2). Pipes and rolled products. Assortment
Language: English |
Parts and elements of steam and hot water pipelines and production pipelines of nuclear power stations from the steel of perlite class for pressure up to 2, 2 MPa (22 kgf/cm2). Specifications
Language: English |
Furniture for kindergarten. Bed cot. Dedicated size
Language: English |
Degrees of protection provided by enclosures (IP Code)
Language: English |
Unified system for design documentation. Specifications
Language: English |
Electomagnetic compatibility of technical equipment. Railway systems and equipment. Part 3-1. Railway rolling stock. Requirements and test methods
Language: English |
Freight and passenger coaches. Test methods for strength and dynamic quality
Language: English |
Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of mandatory certification of products. The procedure
Language: English |
Conformity assessment in the field of use of nuclear energy. Procedure of products certification
Language: English |
Threaded and Radius Patterns
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
