GOST 9.715-86
ГОСТ 9.715-86
|
|
Unified system of corrosion and ageing protection. Polymeric materials. Test methods for temperature shock resistance
Единая система защиты от коррозии и старения. Материалы полимерные. Методы испытаний на стойкость к воздействию температуры
Status: Effective. The limitation of effectiveness has been lifted: Decree of the State Standard No. 636 of 07/01/92
The standard applies to polymeric materials (hereinafter - materials) and establishes test methods for resistance to temperature. The resistance of a material to the effects of temperature is established on the basis of the results of testing samples of a material in determining: temperature ranges at which chemical and / or physical processes take place in a material, including processes accompanied by a change in sample mass (method 1); areas of stress and temperature in which samples retain their shape and integrity (method 2). Method 2 applies only to construction plastics. The methods of the standard are used jointly or separately for the comparative assessment and classification of materials according to their resistance to temperature in the control and research tests.
Стандарт распространяется на полимерные материалы (далее - материалы) и устанавливает методы испытаний на стойкость к воздействию температуры. Стойкость материала к воздействию температуры устанавливают на основе результатов испытаний образцов материала при определении: интервалов температуры, при которых в материале происходят химические и (или) физические процессы, в том числе процессы, сопровождающиеся изменением массы образца (метод 1); области напряжений и температуры, в которой образцы сохраняют форму и целостность (метод 2). Метод 2 распространяется только на конструкционные пластмассы. Методы стандарта применяют совместно или раздельно для сравнительной оценки и классификации материалов по стойкости к воздействию температуры при контрольных и исследовательских испытаниях.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
12/16/1986
SKU: RUSS68039
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.2 Testing of manufacturing products »
ISO classifier »
19 TESTS »
19.040 Climatic tests »
National standards »
19 TESTS »
19.040 Climatic tests »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.020 Rubber and plastics manufacturing processes »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.020 Rubber and plastics manufacturing processes »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T9 Unified system of protection against corrosion and aging of materials and products »
T97 Means and methods of protection against biological factors »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Unified system of protection against corrosion and aging of materials and products (ESZKS) »
National Standards for OKSTU »
POLYMERS, PLASTIC MASSES, CHEMICAL FIBERS AND RUBBERS »
Control methods (testing, analysis, measurements) »
The Document References:
GOST 10297-75: Indium
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 166-89: Vernier callipers. Specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 24105-80: Plastics products. Terms and definitions of defects
GOST 269-66: Rubber. General requirements for the physical mechanical tests
GOST 3640-79: Zinc. Specifications
GOST 3778-77: Lead. Specifications
GOST 3826-82: Wire cloth nets with square mesh. Specifications
GOST 9.083-78: Unified system of corrosion and ageing protection. Paint coatings. Accelerated test methods for durability in liquid corrosive mediums
GOST 9.707-81: Unified system of corrosion and ageing protection. Polymeric materials. Methods of accelerated climatic ageing test
SN 245-71: Sanitary standards for the design of industrial enterprises
The Document is Referenced By:
GOST 12.4.302-2015: Occupational safety standards system. Special protective clothing. Accelerated test methods on climatic ageing
GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works
GOST 9.707-81: Unified system of corrosion and ageing protection. Polymeric materials. Methods of accelerated climatic ageing test
GOST 9.716-91: Unified system of corrosion and ageing protection. Polymeric materials. Methods of determining variation of plasticizer content with ageing
GOST R 25645.332-94: Polymeric materials for spacecrafts with nuclear reactor. Requirements to radiation tests
GOST R 53293-2009: Fire hazard of substances and materials. Materials, substance and fire protective means. Identification by thermal analysis methods
ODM 218.2.025-2012: Expansion joints of automobile bridges
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
RD 50-541-85: Guidelines for the implementation of the standards of the Unified System for the Protection of Products and Materials Against Corrosion, Aging and Biodeterioration (ESHSC) in industries
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
