Technical plasticized polyvinylchloride film. Specifications
Пленка поливинилхлоридная пластифицированная техническая. Технические условия
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard applies to technical plasticized polyvinyl chloride film, which is a thermoplastic material made on the basis of suspension polyvinyl chloride with the addition of plasticizers and stabilizers.
Стандарт распространяется на техническую пластифицированную поливинилхлоридную пленку, представляющую собой термопластичный материал, изготовленный на основе суспензионного поливинилхлорида с добавлением пластификаторов и стабилизаторов.
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
019/2011 TR CU. On safety of personal protective equipment »
Regulations and standards (to ТР ТС 019/2011) »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.1 Rubber products »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.10 Films and sheets »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.10 Films and sheets »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L27 Artificial resins and fiber, plastics and plasticizers »
National Standards for OKSTU »
POLYMERS, PLASTIC MASSES, CHEMICAL FIBERS AND RUBBERS »
Film materials (films, tapes) based on polymerization resins »
As a Replacement Of:
GOST 16272-70: Technical plasticized polyvinylchloride film
The Document References:
SN 245-71: Sanitary standards for the design of industrial enterprises
TU 6-17-626-79: LT Bonding Tape
TU 6-19-212-87: Technical polyvinyl chloride tape with a sticky layer
The Document is Referenced By:
Disposition 113-r: Typical solutions to restore the bearing capacity of the roadbed and to ensure the strength and frost resistance of road surfaces on the heaving sections of roads
GOST 10028-81: Glass capillary viscosimeters. Specifications
GOST 10160-75: Magnetically soft precision alloys
GOST 10234-77: Moderate strength flattened
GOST 10533-86: Cold-rolled thermostatic bimetal strip
GOST 1071-81: Heat treated steel spring wire
GOST 10971-78: Main coaxial cables with type 2,6/9,4 and 2,6/9,5 pairs. Specifications
GOST 11101-93: Air foam hoses. Specifications.
GOST 11850-72: Steel wire for spring washers
GOST 12.4.240-2013: Occupational safety standards system. Insulating suits. General technical requirements and test methods
GOST 12302-2013: Packs made of polymeric films and composite materials. General specifications
GOST 12302-83: Bags made of polymeric and composite materials. General specifications
GOST 12766.1-90: High electrical resistant wire made of precision alloys
GOST 12766.2-90: Strip from precision high electric resistance alloys
GOST 12766.3-90: Precision gauged alloys of high electric resistance
GOST 12962-80: Medium expansion foam-making branch pipes. Specifications
GOST 12963-80: Suction gauzes. Specifications
GOST 13781.2-77: Lead joints for 1; 6 and 10 kV power cables. Complete set of details and mounting materials. Specifications
GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications
GOST 14081-78: Wire of precision alloys with specified temperature coefficient of linear expansion. Specifications
GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications
GOST 14117-85: Strip made from precision alloys for elastic elements
GOST 14118-85: Wire made of precision alloys, designed for elastic elements
GOST 14119-85: Rods from precision alloys for elastic elements
GOST 14189-81: Pesticides. Rules for acceptance, methods of sampling, packing, marking, handling and storage
GOST 14204-69: Instrument for separation of arsenic in steels, casts irons and alloys. Specifications
GOST 14279-79: Sleeved water collecting. Technical conditions
GOST 14963-78: Doped steel spring wire
GOST 1526-81: Steel zinc-coated wire for electrical lead and cable armoring
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 15976-81: Perforated and perforated-corrugated vinyl plastic film. Specifications
GOST 16097-83: Chemical charges for fire extinguishers
GOST 16135-70: Steel wire for calculating devices
GOST 16214-86: Tape polyvinylchloride electro insulation
GOST 16295-82: Packing anticorrosive paper. Specifications
GOST 16398-81: Calenderer vinyl plastic film. Specifications
GOST 1668-73: Steel zinc-coated wire for aerial lines
GOST 1692-85: Chlorinated lime
GOST 17305-71: Wire of carbon construction steel. Specification
GOST 17305-91: Wire of carbon construction steel
GOST 1779-83: Asbestos cord
GOST 18143-72: Corrosion resistant
GOST 18481-81: Glass hydrometers and cylinders. General specifications
GOST 18690-2012: Cable, wires, cord and armature. Marking, packing, carriage and storage
GOST 18690-82: Cables, wires, cord and armature. Marking, packing, carriage and storage
GOST 18954-73: Gas sampling and storage glass apparatus and tubes (pipettes). Specifications
GOST 19360-74: Film liner-bags. General specifications
GOST 2081-2010: Carbamide. Specifications
GOST 2081-92: Carbamide
GOST 2172-80: Aviation steel ropes
GOST 21996-76: Cold-rolled heat treated steel-cord belt
GOST 21997-76: Steel flattened strip of high strength
GOST 22291-83: Silica glass. The method for determination of chemical stability
GOST 2246-70: Welding steel wire. Specifications
GOST 22498-88: Local telephone cables with polyethylene insulation and plastic sheath.
GOST 22696-2013: Rolling bearings. Cylindrical rollers. Specifications
GOST 22696-77: Rolling bearings. Short cylindrical rollers. Technical requirements
GOST 2283-79: Cold-rolled tape made of tool steel and spring steel
GOST 2284-79: Cold-rolled carbon structural steel strip
GOST 23074-85: Fertilizer placers for liquid organic fertilizers
GOST 23094-78: Glass butyrometers. General specifications
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 23522-79: Cold-rolled strip for hack saws. Specifications
GOST 23932-79: Laboratory glassware and equipment. General technical requirements
GOST 23932-90: Laboratory glassware and equipment. General specifications
GOST 23982-85: Fertilizing machinery
GOST 24702-81: Table oil-cloth. General specifications
GOST 25250-88: PVC film for production of food and medicine package. Specifications
GOST 25255-82: Rolling bearings. Long cylindrical rollers. Technical requirements
GOST 26.006-79: Uniform system of standardization in instrument making. Measuring and automation devices. Marking, packing
GOST 26118-84: Electric energy semiconductor converters with power 5 kV.A and higher. Marking, packing, transportation and storage
GOST 26363-84: Power generating sets and mobile electric power stations with internal combustion engines. Rules of marking, parking, transportation and storage
GOST 27716-88: Masks for printed boards. General specifications
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 3110-74: Steel spoke wire
GOST 31624-2012: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications
GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications
GOST 3187-76: Wire gauze net for filtration
GOST 31943-2012: Telephone cables with polyethylene insulation and plastic sheath. Specifications
GOST 31995-2012: Polyethylene insulated and plastic sheathed block-signalling cables. Specifications
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 3560-73: Sealing tepe
GOST 3722-2014: Rolling bearings. Steel balls. Specifications
GOST 3722-81: Rolling bearings. Balls. Technical requirements
GOST 3822-79: Bimetallic steel-copper wire
GOST 3826-82: Wire cloth nets with square mesh. Specifications
GOST 4601-73: Steel wire tweel mesh cloth with square apertures
GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel
GOST 503-81: Cold-rolled low-carbon steel strip. Specifications
GOST 520-2002: Rolling bearings. General specifications
GOST 520-2011: Roll bearings. General specifications.
GOST 520-89: Rolling bearings. General specifications
GOST 5437-85: Reed wire
GOST 5468-88: Needle wire
GOST 5663-79: Carbon steel wire for cold upsetting
GOST 6613-86: Square meshed woven wire gauzes
GOST 6870-81: Rolling bearings. Needle rollers. Specifications
GOST 7006-72: Protective coverings of cables. Design and types, technical requirements and test methods
GOST 7183-93: Foam mixers. Specifications.
GOST 7372-79: Steel wire for ropes
GOST 7480-73: Polygraphic wire
GOST 7498-93: Hydro elevators for firefighting. Specifications.
GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage
GOST 7566-94: Metal products
GOST 792-67: Quality low-carbon wire
GOST 8037-93: Hose branches. Specifications.
GOST 808-70: Flattened steel strip for spiral rollers of bearings
GOST 828-77: Sodium nitrate technical. Technical conditions
GOST 9097-82: Ammonium sulfate
GOST 9124-85: Binding tin-coated steel wire
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST 9389-75: Carbon steel spring wire
GOST 9849-86: Iron powder. Specifications
GOST 9850-72: Zinc-coated steel core wire
GOST 9923-80: Manual fire barrel. Specifications
GOST R 12.4.196-99: Occupational safety standards system. Insulating suits. General technical requirements and test methods
GOST R 50139-92: Processing equipment. General specifications
GOST R 50398-92: Fire hydraulic elevator. Specifications
GOST R 50399-92: Air-foam nozzles. Specifications
GOST R 50400-92: Hose branching. Specifications
GOST R 50401-92: Suction gauzes. Specifications
GOST R 50408-92: Foam mixers. Specifications
GOST R 50409-92: Medium expansions foam-making branch pipes. Specifications
GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 51311-99: Telephone cables with polyethylene insulation and plastic sheath. Specifications
GOST R 51312-99: Polyethylene insulated and plastic sheathed block-signalling cables. Specifications
GOST R 51396-99: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications
GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications
GOST R 52859-2007: Rolling bearings. General specifications
GOST R 52903-2007: Packs made of polymeric films and composite materials. General specifications
GOST R 54562-2011: Chlorinated lime. Specifications
GOST R 55760-2013: Generating sets driven by internal combustion engines. Rules of marking, packing, transportation and storage
GOST R 56629-2015: Electric Connectors for diving works. General specifications
GOST R 57217-2016: Medical multi-place hyperbaric chambers with operating pressure 1, 0 MPa. General technical requirements
GOST R 57530-2017: Medical equipment for hyperbaric chambers under pressure. General technical requirements
GOST R 57548-2017: Vacuum induction melting for obtaining products with single-crystal structure. Technical requirements
GOST R 57549-2017: Vacuum induction melting for obtaining products with polycrystalline structure. Technical requirements
GOST R 57550-2017: Technological equipment for electron beam processing in vacuum
GOST R 57894-2017: Equipment for electron beam processing. General requirements
GOST R 57895-2017: Equipment for radial acceleration dispersal. General requirements
GOST R 57896-2017: Equipment for zone refining of refractory metal without crucible. General requirements
GOST R 57897-2017: Units for ceramic core’s removal. General requirements
Manual for SNiP 2.05.07-85: Cable Car Design Toolkit
Manual for SNiP 2.05.07-85: Guide for the design of subgrade and drainage of railways and roads of industrial enterprises
Manual for SNiP 2.05.07-85: Hydraulic Vehicle Design Guide
Manual for SNiP 2.05.07-85: A guide to determining the integrated technical and economic indicators of the cost of construction for comparing options and choosing types of industrial transport
Manual for SNiP 2.05.07-85: Guide for the design of conveyor transport. Conveyor belts
Manual for SNiP 2.05.07-85: Design Guide for Industrial Rail Stations
Manual for SNiP 2.05.07-85: Manual on the design of railways and roads of industrial enterprises in permafrost areas (to SNiP 2.05.07-85)
Manual for SNiP 3.09.01-85: Manual on the use of chemical additives in the production of precast concrete structures and products
Manual for SNiP 3.09.01-85: Manual for the heat treatment of precast concrete structures and products
Manual for SNiP 3.09.01-85: The technology of manufacturing reinforced concrete pressure pipes with a steel core
Manual for SNiP 3.09.01-85: Manual for the heat treatment of reinforced concrete products with natural gas combustion products
Manual for SNiP 3.09.01-85: Production of prefabricated self-reinforced concrete structures and products
Manual for SNiP 3.09.01-85: Reinforced concrete molding technology manual
Manual for SNiP 3.09.01-85: Manual for heliothermal processing of concrete and reinforced concrete products using SVITAP coatings
Manual for SNiP 3.09.01-85: Manual for heliothermal treatment of concrete and reinforced concrete products using film-forming compounds
OST 1-00851-77: Fillers cellular glued PSP-1. Technical specifications
OST 26-07-1374-76: Types and grades of plastics used in armature engineering.
OST 4 G0.010.016: Wiring of cable products into connectors. General technical requirements
OST 5R.9527-94: Pipes and products of general purpose marine systems. Cleaning and preservation (before installation). Typical processes.
RD 107.460007.007-92: Plastic materials. Selection manual.
RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
ST RK 2338-2013: PVC insulated and PVC sheath flexible cables. General specification
ST RK 2339-2013: Plastic insulated small-paired telephone cables. Specification
ST RK 2340-2013: Stationary phone cables. Specification
ST RK 2643-2015: Local communication cables of high frequency. Specifications.
ST TsKBA 056-2008: Pipe fittings. Types and brands of plastics used in the valve industry
ST TsKBA 106-2011: Pipe fittings. Oxidation of titanium alloy parts
TR 111-00: Technical recommendations on the use of waterproofing compound "Akvatron-8" with an adjustable setting time for underground construction
TR 120-01: Technical recommendations on the waterproofing of the underground part of buildings and structures using materials "Akvatron-6u", "Akvatron-8b", "Akvatron-12"
TR 121-01: Technical recommendations for mastic waterproofing of the internal surfaces of the underground part of buildings and structures
TR 144-04: Technical recommendations on the use of waterproofing materials "Akvatron"
TR 99-99: Technical recommendations on the use of waterproofing mortars and concrete with the material "Akvatron-6" for underground construction
TU 14-4-1431-87: AP-AN4 Activated Welding Wire. Technical conditions
TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them
TU 63-178-112-87: Film from recycled polyvinyl chloride raw material for road construction "Armodor-2". Technical conditions
VSN 210-91: Design, construction and operation of anti-landing structures and devices
Customers Who Viewed This Item Also Viewed:
Petroleum for oil-processing plants. Specifications
Electrical articles. General requirement for environment mechanical stability
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Power transformer on-load tap-changing devices. General specifications
Conical pipe thread. Profile, basic dimensions and tolerances
Glass and glass products. Visual faults. Terms and definitions
Glass and glass products. Inspection methods for geometric parameters and appearance
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Crude petroleum. General specifications
Power transformers. Test methods of tap changing devices
Unified system for design documentation. Stages of designing
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Guidelines for the photometric determination of hydrogen sulfide in the air
Tempered glass. Specifications.
Glass with low emissivity hard coating. Specifications.
Glass laminated. Specifications.
Water quality. Sewage water
Passenger cars. Windscreen defrosting and demisting systems. Technical requirements and test methods
Passenger cars. Windscreen wiper and washer systems. Technical requirements and test methods
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.