imgalt

GOST 2768-84

ГОСТ 2768-84

Acetone technical. Specifications

Ацетон технический. Технические условия

Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)

The standard applies to technical acetone, obtained by the cumene method, by the method of acetone-butyl fermentation, and also as a by-product in a number of productions.

Стандарт распространяется на технический ацетон, получаемый кумольным методом, методом ацетонобутилового брожения, а также в качестве побочного продукта в ряде производств.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 8/28/1984

SKU: RUSS68153

Price: $283.00

English keywords: aldehydes; aldehydes and ketones; ketones;


imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 71 Chemical industry »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.1 Products of main chemical industries »

ISO classifier » 71 CHEMICAL INDUSTRY » 71.080 Organic Chemicals » 71.080.80 Aldehydes and Ketones »

National standards » 71 CHEMICAL INDUSTRY » 71.080 Organic Chemicals » 71.080.80 Aldehydes and ketones »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L2 Organic Chemical Products » L21 Organic intermediates »

National Standards for OKSTU » ORGANIC SYNTHESIS PRODUCTS, SYNTHETIC DYES AND PETROCHOCOLES AND CHEMICAL PRODUCTS » Ketones and organic acid anhydrides »


As a Replacement Of:

GOST 2768-79: Acetone technical. Specifications

The Document References:

GOST 10146-74: Filter fabrics made of glass twisted complex threads. Specifications

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 13950-91: Welded and folded steel barrels

GOST 14192-77: Marking of cargoes

GOST 14192-96: Cargo marking

GOST 14870-77: Reagents. Methods for determination of water

GOST 17366-80: Welded thick-walled steel barrels for chemical products

GOST 17435-72: Drawing rulers. Specifications

GOST 17567-81: Gas chromatography. Terms and definitions

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 18573-86: Wooden boxes for the production of chemical industry

GOST 18995.1-73: Liquid chemical products. Methods for determination of density

GOST 19433-88: Dangerous goods. Classification and marking

GOST 20015-88: Chloroform. Specifications

GOST 20490-75: Reagents. Potassium permanganate. Specifications

GOST 21029-75: Aluminum barrels for chemical products

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 24363-80: Reagents. Potassium hydroxide. Specifications

GOST 24831-81: Containers - equipment

GOST 2517-85: Crude oil and petroleum products. Methods of sampling

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 25706-83: Magnifiers

GOST 2603-79: Reagents. Acetone. Specifications

GOST 26319-84: Dangerous cargoes

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 2768-69: Acetone technical

GOST 3022-80: Technical hydrogen. Specification

GOST 4204-77: Reagents. Sulphuric acid. Specifications

GOST 4212-76: Reagents. Methods for preparation of solutions for colorimetric and nephelometric analysis

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4328-77: Reagents. Sodium hydroxide. Specifications

GOST 4919.1-77: Reagents and matters of special purity. Methods for preparation of indicators solutions

GOST 5456-79: Reagents. Hydroxilamine hydrochloride. Specifications

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 6552-80: Reagents. Orthophosphoric acid. Specifications

GOST 6613-86: Square meshed woven wire gauzes

GOST 6709-72: Distilled water. Specifications

GOST 6995-77: Reagents. Methanol-poison. Specifications

GOST 8325-78: Hass twisted complex threads. Specifications

GOST 8325-93: Textile glass. Twisted complex threads. Specifications

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

GOST 9980.3-86: Paint materials. Packing

GOST 9980.5-86: Paint materials. Transportation and storage

The Document is Referenced By:

GOST 10144-89: Enamels XB-124Specifications

GOST 10277-90: Putties. Specifications

GOST 10503-71: Oil paints, ready for use. Specifications

GOST 10674-2022: Tank wagons. General specifications

GOST 10679-2019: Liquefied hydrocarbon gases. Method for the determination of hydrocarbon composition

GOST 10950-78: Sawn timber and semi-manufactures. Antiseptic methods of immersion

GOST 11126-2019: Coke-chemical raw materials for the production of carbon black. Technical specifications

GOST 11126-88: By-product coke raw materials for the production of commercial carbon

GOST 11368-89: Wood moulding compounds. Specifications

GOST 11629-2017: Plastics Method for determining the coefficient of friction

GOST 11629-75: Plastics. Method of test for coefficient of friction

GOST 1198-93: Asbestos brake bands

GOST 12.4.170-86: Occupational safety standards system. Polymer coated materials for special clothes. Method for determination of organic solvents resistance

GOST 12172-2016: Phenol-polyvinylacetyl adhesives. Specifications

GOST 12172-74: Phenol-polivinylacetyl adhesives. Specifications

GOST 13.1.302-87: Reprography. Micrography. Vesicular film. General specifications

GOST 13496.15-85: Forages, compound feeds, raw material. Methods for determining rawfat

GOST 13496.15-97: Forages, compound feeds, raw material for compound feeds. Methods for determining the raw fat content

GOST 13979.11-83: Cottonseed oilcakes and oilmeals. Determination of free gossypol content

GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications

GOST 14243-78: Paintwork materials. Methods for formation of free films

GOST 14839.9-69: Industrial explosives. Method for determination of nitroamines (hexogen) content

GOST 14870-77: Reagents. Methods for determination of water

GOST 15027.10-77: Non-tin bronze. Methods for the determination of tin

GOST 15081-78: Silico-organic thermostable varnish KO-08. Specifications

GOST 15123-78: Simazine - 50% and 80%

GOST 15140-78: Paintwork materials. Methods for determination of adhesion

GOST 15865-70: Insulating varnish MЛ-92. Specifications

GOST 16948-79: Light sources, artificial. Method of determining ultraviolet radiation density energy flow

GOST 17006-80: Diamond cylinder wheels

GOST 17445-80: Commercial hexachlorobenzene

GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials

GOST 18096-87: Mica details for electronic devices. Specifications

GOST 18297-80: Enamelled cast-iron sanitary appliances. General technical requirements and test methods

GOST 1942-86: 1,2-Dichlorethane for industrial use. Specifications

GOST 19433-88: Dangerous goods. Classification and marking

GOST 19710-2019: Ethylene glycol. Technical conditions

GOST 19710-83: Ethylene glycol. Specifications

GOST 20060-83: Combustible natural gases. Methods for determining water vapor content and dew point of moisture

GOST 20302-74: Motor oils. Method of corrosion test for oils on engine 'Yas-204'

GOST 20422-89: Pulp, paper and board. Methods for determination of chloride-ions and sulphate-ions fraction of total mass

GOST 2081-2010: Carbamide. Specifications

GOST 2081-92: Carbamide

GOST 20824-81: Varnish ЭП-730. Specifications

GOST 20843.1-89: Coal tar phenol products. Gas chromatographic method for determination of composition of phenol, o-cresol

GOST 20944-75: Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity

GOST 21261-91: Oil products. Method for the determination of gross calorific value and calculation of net calorific value

GOST 21981-76: Sealants. Determination method of bond strength with metal at peeling

GOST 22896-77: Paint coatings for electric locomotives of 1520 mm gauge main line railways. Specifications

GOST 22947-78: Paint coatings for diesel locomotives of 1520 mm gauge main line railways. Specifications

GOST 23.204-78: Products wear resistance assurance. A method of assessment of the surface wearing ability in friction

GOST 23.207-79: Ensuring of wear resistance of products. Testing of engineering materials for impact abrasive wear

GOST 23.208-79: Ensuring of wear resistance of products. Wear resistance testing of materials by friction against loosely fixed abrasive particles

GOST 23178-78: High-temperature fluoroborate and boride halogenide fluxes for soldering

GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications

GOST 23519-93: Technical synthetic phenol. Specifications

GOST 23691-79: Joints of tubes with tube-plates and collectors of heat exchangers. Compression of tubes by sources of impulse pressure. General

GOST 23695-79: Enamelled steel sanitary appliances. General technical requirements

GOST 23744-79: Non-drying mastic 51-Г-6. Specifications

GOST 23797-79: Oil for aircraft gas turbine engines. Method for the determination of thermo oxidizing stability in oil volume

GOST 23846-79: Refrigerator cores for main railways of 1520 (1524) mm gauge. Paint coatings. Specifications

GOST 24285-80: Sealant of marks УТ-34. Specifications

GOST 24709-2022: Enamels EP-140. Specifications

GOST 24709-81: Enamels ЭП-140. Specifications

GOST 2477-2014: Petroleum and petroleum products. Method for determination of water content

GOST 2477-65: Petroleum and petroleum products. Method for determination of water content

GOST 24866-2014: Insulating glass units. Specifications

GOST 24866-89: Sealed insulating glass units

GOST 24866-99: Sealed insulating glass units. Specifications

GOST 25280-90: Metal powders. Method for determination of compressibility

GOST 25282-93: Metallic powders. Method for determination of pressings strength

GOST 25428-82: Fluoroplast-42. Specifications

GOST 25515-82: Enamels НЦ-256. Specifications

GOST 25945-87: Polymer building non-hardening sealing materials and products. Test methods

GOST 25945-98: Building polymer sealing non-hardening materials and products. Test methods

GOST 26075-2013: Animals. Methods of Laboratory Diagnostic of Rabies

GOST 26129-84: Dressed fur skins and wool-skin. Methods of determination of unbound fat content

GOST 26220-84: Aerosol aluminum mono-block bulbs

GOST 26581-85: Greases. Method of test for effective viscosity on a rotary viscosimeter

GOST 26891-86: Aerosol valves, spray heads and caps

GOST 27180-2001: Ceramic tiles. Test methods

GOST 27180-2019: Ceramic tiles. Test methods

GOST 27325-87: Products and elements of wood and wooden materials. Method of determination of varnish-and-paint coating adhesion

GOST 27890-88: Decontaminable protective coatings (paints). Adhesion determination by normal pull-off method

GOST 27891-88: Polymer protective coatings for insulation, localization, deactivation and accumulation. Method for determination of stripping quality

GOST 28006-88: Structural carbonic strip. Specifications

GOST 28326.1-89: Technical liquid ammonia. Methods for determination of residue after evaporation

GOST 28985-91: Rocks. Method of determination of deformation characteristics under uniaxial compression

GOST 3.1127-93: The unified system of technological documentation. General rules for drawing up of textual technological documents

GOST 30351-2001: Polyamides, polyamide fibres, fabrics, films. Determination of mass fraction of residual caprolactam and low-molecular compounds and their concentration of migration in water. Methods of liquid and gas-liquid chromatography

GOST 31089-2003: Household solvents (diluents) for paint coating materials. General specifications

GOST 31370-2008: Natural gas. Sampling guidelines

GOST 31536-2012: Wheelsets for the traction railway stock. Method of measuring electrical resistance

GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST 31693-2012: Cosmetics for nails care and make-up. General specifications

GOST 31695-2012: Cosmetic gels. General specifications

GOST 31750-2012: Macaroni products. Methods of identification

GOST 31847-2012: Wheel sets for the special-purpose rolling stock. General specifications

GOST 32411-2013: Commercial explosives. Methods of determination of electric copacitance, density and resistance to water emulsions

GOST 32590-2013: Fittings of copper and copper alloys with ends for capillary soldering or capillary brazing to copper tubes. Specifications

GOST 32591-2013: Fittings of copper and copper alloys with compression ends for use with copper tubes. Specifications

GOST 32598-2013: Tubes copper round for water and gas. Specifications

GOST 32683-2014: Edges material based paper impregnated with carbamide-formaldehyde resin. Specifications

GOST 32688-2014: Foodstuffs. Determination of sugar-containing ingredients by mass spectrometry of stable oxygen isotopes

GOST 32946-2014: Automobile roads of general use. Road signs. Control methods

GOST 33143-2014: Public roads. Bitumen of petroleum viscous for road building. The method of determining the fracture temperature by Fraas method

GOST 33276-2015: Juice products. Methods for determination of relative density

GOST 33333-2015: Food additives. Xanthan gum E415. Specifications

GOST 33389-2015: Public roads. Deicing materials. Test methods

GOST 33700-2015: Crude oil. Determination of water content by distillation

GOST 33756-2016: Plastic consumer packaging. General specifications

GOST 34263-2017: Fiberglass. Roving Determination of the solubility of the finish

GOST 34624-2019: Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems

GOST 3864-75: 22% Mastic. Specifications

GOST 4039-88: Automobile gasolines. Methods of test for induction period

GOST 4117-78: TMT for industrial explosives. General requirements

GOST 4546-81: Explosives. Methods of fougasse properties definition

GOST 482-77: Zink oxide oil paste. Specifications

GOST 4835-2013: Wheelsets for freight and passenger car. Technical specifications

GOST 4960-2009: Electrolytic copper powder. Specifications

GOST 4960-2017: Copper electrolytic powder. Technical conditions

GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument

GOST 5470-75: Lacquers of ПФ-283 and ГФ-166 types. Specifications

GOST 6465-76: Enamels PF-115. Specifications

GOST 64-77: Enamels ГФ-230 BЭ. Specifications

GOST 6586-77: Black paste (oil base) MA-015. Specifications

GOST 6689.22-92: Nickel, nickel and copper-nickel alloys. Methods for the determination of tin

GOST 6943.10-2015: Textile glass materials. Method for determination of breaking load and elongation at break

GOST 6943.10-79: Glass textile products. Method for determination of breaking load and elogation at rupture

GOST 7102-80: Pyropowders and varnish powders. Methods for determination of graphite fraction of total mass

GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications

GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies

GOST 745-2003: Aluminium foil for packing. Specifications

GOST 745-2014: Aluminium foil for packing. Specifications

GOST 8292-85: Oil and paste color paints

GOST 8489-85: Motor fuel. Method for determination of existent gums (Budarov's)

GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing

GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9.602-2016: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9.704-80: Unified system of corrosion and ageing protection. Vulcanized rubbers. Methods of determination of the packing parts for the fixed joints working capacity during the radiation-thermal ageing

GOST 9.904-82: Unified system of corrosion and ageing protection. Aluminium alloys. Accelerated test method for exfoliating corrosion

GOST 9014.0-75: Round wood

GOST 9014.2-79: Round timber. Storage. Protection by means of waterproof and anticeptic waterproof coatings

GOST 9286-89: Pentaerythritol for industrial use. Specifications

GOST 9585-77: Acetaldehyde technical. Specifications

GOST 9590-76: Laminated paper decorative plastic. Specifications

GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods

GOST R 12.4.217-2000: Safety leather shoes. Method for determination of penetration by organic solutions

GOST R 12.4.286-2017: Occupational safety standards system. Special clothing for protection against gases and liquid chemicals. Method for determining the protective properties of the material under the action оf chlorine and ammonia

GOST R 50089-2003: Radioactive waste. Method of measuring long-time alpha-radiation resistance of solidified high-level radioactive waste

GOST R 50482-93: Wood chemical products. Method for determination of the unsaponifiable matters

GOST R 50568.7-93: Urea for industrial use. Photometric method for determination of biuret content

GOST R 51760-2001: Polymeric consumers packagings. General specifications

GOST R 51775-2001: Wheel sets for the special-purpose rolling stock. General specifications

GOST R 52126-2003: Radioactive waste. Long-time leach testing of solidified radioactive waste forms

GOST R 52318-2005: Round copper tubes for water and gas. Specifications

GOST R 52569-2006: Frits. Specifications

GOST R 52569-2018: Frits. Specifications

GOST R 52701-2006: Cosmetics for nails care and make-up. General specifications

GOST R 52810-2007: Macaroni products. Methods of identification

GOST R 52889-2007: Non-destructive testing. Ultrasound measurement of screw tightening forces. General requirements

GOST R 52890-2007: Non-destructive testing. Evaluation of stresses in material of pipelines by ultrasound. General requirements

GOST R 52920-2008: Wheelsets for the traction railway stock. Method of measuring the electrical resistance

GOST R 52922-2008: Fittings from copper and copper alloys for capillary soldering to copper tubes. Specifications

GOST R 52948-2008: Fittings from copper and copper alloys with compression ends for use with copper tubes. Specifications

GOST R 53191-2008: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST R 53205-2008: Non-destructive testing. Evaluation of grains size of steel by ultrasound. General requirements

GOST R 53568-2009: Non-destructive testing. Evaluation of third order elasticity modulus by ultrasound. General requirements

GOST R 53803-2010: Copper rod for electrical purposes. Specifications

GOST R 54174-2010: Sealed insulating glass units. Rules and methods of products quality assurance

GOST R 54175-2010: Sealed insulating glass units. Specifications

GOST R 54301-2011: Cold-rolled electrolyze zinc sheet with polymer coating, repainted by the continuous coil-coating process. Specifications

GOST R 54487-2011: Non-destructive testing. Evaluation of gas porosity in aluminium casting alloys by ultrasound. General requirements

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 55042-2012: Non-destructive testing. Evaluation of metallic coating thickness by ultrasound. General requirements

GOST R 55066-2012: Butadiene-1,3. Specifications

GOST R 55072-2012: Fiberglass reinforced thermosetting plastic vessels. Specifications

GOST R 55805-2013: Non-destructive testing. Ultrasonic monitoring of texture in rolled steel sheets. General requirements

GOST R 55806-2013: Non-destructive testing. Ultrasound measurement of bonding strength of layers in bimetal. General requirements

GOST R 55807-2013: Non-destructive testing. Ultrasonic monitoring of internal straight pipe threads. General requirements

GOST R 55926-2013: Edges material based paper impregnated with carbamide-formaldehyde resin. Specifications

GOST R 56185-2014: Technical diagnostics. Evaluation of stresses in sides of pressure vessels by ultrasound. General requirements

GOST R 56186-2014: Technical diagnostics. Evaluation of a status of long used rails by acoustic method. General requirements

GOST R 56187-2014: Technical diagnostics. Ultrasonic monitoring of steel overheating sheets. General requirements

GOST R 56201-2014: Functional food products. Methods for the determination of bifidogenic properties

GOST R 56306-2014: Silver. Method of inductively coupled plasma atomic-emission analysis

GOST R 56664-2015: Non-destructive testing. Evaluation of stress state material engineering products by acoustoelastic methods. General requirements

GOST R 56665-2015: Non-destructive testing. Ultrasonic method for determining the residual stresses in the railway wheel rims. General requirements

GOST R 56666-2015: Technical diagnostics. Acoustic method of diagnostics and evaluation a residual resource of side frames trucks wagons. General requirements

GOST R 56667-2015: Technical diagnostics. Acoustic method for assessing conditions of high-speed wagons. General requirements

GOST R 56682-2015: Polymer and metal composites. Method for determination the volume of matrix, reinforce filler and voids

GOST R 56719-2015: Liquefied natural gas. Sampling

GOST R 56782-2015: Polymer composites. Prepregs. Determination of constituent content of prepreg by Soxhlet extraction

GOST R 57054-2016: Mining equipment. Tubing cast iron. Sets of tubing rings. General specifications

GOST R 57221-2016: Nutrient yeast. Test methods

GOST R 57283-2016: Calculation and strength testing. Acoustic method for determination of damage under thermocyclic fatigue of steel. General requirements

GOST R 57284-2016: Calculation and strength testing. Acoustic method for determination of damage under low-cycle fatigue of steel. General requirements

GOST R 57803-2017: Plastics. Phenolic resins. Determination of the content of substances, soluble in acetone

GOST R 57851.2-2017: Gas-condensate mixture. Part 2. Unstable gas condensate. Compositional analysis by gas chromatography method with preliminary sample degasification

GOST R 58282-2018: Methyl tert-butyl ether. Technical conditions

GOST R 58820-2020: Phosphogypsum for agriculture. Specifications

GOST R 59952-2021: Paint and varnish materials. Technical specifications. General requirements for design and execution

GOST R 70286-2022: Trunk pipeline transport of oil and petroleum products. Composite composition and sealant for composite-coupling repair. General specifications

GOST R 70549-2022: Products of phenolic coal products. Gas chromatographic method for determining the component composition of phenol and o-cresol

GOST R 70638-2023: Pipeline valves. Degreasing methods

GOST R 70708-2023: Pyrolysis liquid products. Pyrolysis light tar. Technical conditions

GOST R 8.1010-2022: State System for Ensuring Uniformity of Measurements (GSI). Mass fraction of water in oil-gas-water mixture. Requirements for measurement techniques (methods)

I 1.09-10: Instructions for connecting insulated conductors of wires and cables

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

Letter 2489-OG/03: About the presence of a typo in GOST 2768-84

M 10: Method for determination of chlorine-containing organic compounds (methylene chloride, chloroform, dichloroethane, carbon tetrachloride, epichlorohydrin, trichlorethylene, tetrachlorethylene), and also acetaldehyde and acrylonitrile in industrial emission

Manual for SNiP 2.09.03-85: Design of retaining walls and basement walls

Manual for SNiP 2.09.03-85: Design Guide for Anchor Bolts for Securing Building Structures and Equipment

Manual for SNiP 2.09.03-85: Manual on designing stand-alone supports and overpasses for process pipelines

Manual for SNiP 2.09.03-85: Conveyor Gallery Design Guide

Manual for SNiP 2.09.03-85: Design of open crane overpasses

MU 0898-00.001: Methods of conducting non-destructive testing of hooks of lifting and transport equipment (automobile, tractor, trailer cranes and crane beams)

MU 1.2.2634-10: Microbiological and molecular genetic assessment of the effects of nanomaterials on microbiocenosis representatives

MU 5968-91: Methodological guidelines for gas chromatographic measurement of isophorone concentrations (1, 5, 5-trimethylcyclohexenone-3) in the air of the working area

MUK 4.1.1296-03: Gas chromatographic measurement of mass concentrations of 2-aminoethanol (monoethanolamine) in the working area air

MUK 4.1.2228-07: Chromato-mass-spectrometric determination of the sum of steroid saponins Yuss Schidiger in water

MUK 4.1.598-96: Methodological guidelines for gas chromatographic determination of aromatic, sulphur-containing, halogen-containing substances, methanol, acetone and acetonitrile in atmospheric air

MUK 4.1.599-96: Methodological guidelines for gas chromatographic determination of acetaldehyde in atmospheric air

MUK 4.1.600-96: Methodological guidelines for gas chromatographic determination of acetone, methanol and isopropanol in atmospheric air

MUK 4.1.601-96: Guidelines for the gas chromatographic determination of acetoacetic ester in atmospheric air

MUK 4.1.602-96: Methodological guidelines for gas chromatographic determination of benazole P (2 -/2'-hydroxy-5'-methylphenyl/benztriazole) in atmospheric air

MUK 4.1.603-96: Guidelines for the gas chromatographic determination of benzyl acetate in ambient air

MUK 4.1.649-96: Methodological guidelines for chromatographic-mass-spectrometric determination of volatile organic substances in water

MUK 4.1.650-96: Methodological guidelines for gas chromatographic determination of acetone, methanol, benzene, toluene, ethyl benzene, pentane, o-, m-, p-xylene, hexane, octane and decane in water

MUK 4.1.748-99: Gas chromatography determination of 2-methyl-5-vinylpyridine in water

MUK 4.2.2321-08: Methods for the determination of Campylobacter spp. In foodstuffs

NPB 88-2001*: Fire extinguishing and alarm systems. Norms and design rules

ODM 218.5.006-2008: Guidelines for the use of environmentally friendly anti-icing materials and technologies in the maintenance of bridge structures

ODM 218.5.008-2008: Methodical recommendations on the use of a crack-interrupting layer when constructing road pavements with a polymer-asphalt-concrete coating (for experimental implementation)

ODM 218.7.003-2008: Recommendations on the Fraas viscous oil road bitumen fragility temperature method

OSN-APK 2.10.06.001-04: Instructions for the installation of plastic pipelines at the objects of the agroindustrial complex of Russia

OST 108.020.131-85: Steam, Gas and Hydraulic Turbines. General requirements for conservation.

OST 26-07-794-73: General purpose cryogenic pipeline fittings. General specifications.

OST 26-11-14-88: Pressure-operated vessels and devices. Gas and liquid leak check methods.

OST 34-42-841-86: Organization of assembly works in nuclear thermal power plants. Assembly of thermal and mechanical equipment in nuclear thermal power plants with ВВЭР-1000 reactors. General technical requirements.

OST 37.002.1153-86: Typical technological process sealing isolation and braiding at the ends of electrical wires. Main provisions.

OST 92-1586-89: Marking paints. General requirements for selection, preparation and laying.

PNAE G-7-019-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Leak tightness control. Gas and liquid methods

PNST 5-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of the Fraass breaking point

R 52.24.855-2016: Prediction of the spread of the emergency pollution zone in watercourses for subsequent use in operational monitoring

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 153-34.0-21.601-98: Model Guidelines for Operation of Process Buildings and Structures of Electric Power Facilities. Part II, Sections 1, 2

RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions

RD 31.52.04-90: Polymer adhesive compositions. Application in ship repair. Technological requirements

RD 31.55.08.01-89: Iron casting. Materials charge and auxiliary. Consumption rates

RD 34.10.351: Specified Quantity Allowances for Materials for Repair of Turbine Generators

RD 34.10.354-88: Transformers Consumption of materials for repair

RD 34.20.131: Instructions for the protection of heat networks from electrochemical corrosion

RD 34.21.662-84: Typical instructions for painting metal poles of power lines using a rust converter

RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment

RD 34.35.619: Pressure Gauges, Vacuum Gauges, and Pressure-and-Vacuum Gauges Type MED, Interchangeable Spring-Loaded with Unified Electrical Output Signal. Guide to Overhaul

RD 34.45.614: Guide to Overhaul of Turbine Generators TVF-120-2 and TVF-100-2

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 52.10.803-2013: Mass fraction of petroleum hydrocarbons in samples of marine bottom sediments. Methods of measurement by infrared spectrometry

RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RU 1.2.1.14.001-2012: Guidance for the repair of concrete, reinforced concrete constructions and hydrotechnical constructions of nuclear power plant stations

SDOS-07-2012: Methodological recommendations on the procedure for tightness control of technical devices and structures used and operated at hazardous production facilities

SO 34.46.608-2005: Typical technological instruction. Methods of repairing porcelain tires high-voltage bushings

SP 485.1311500.2020: Fire protection systems. Automatic fire extinguishing installations. Norms and rules of design

SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations

ST TsKBA 046-2007: Pipe fittings. Degreasing methods

ST TsKBA 061-2010: Pipe fittings. Temporary anti-corrosion protection. General requirements for the choice of means and methods of protection

ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions

ST TsKBA 103-2011: Pipe fittings. Passivation of workpieces, castings, components and parts from corrosion-resistant steels and alloys

STB 1140-2013: Technical means of traffic management. Traffic signs. General specifications

STB 1517-2004: Plastic consumer packaging. General specifications

STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions

STB 1671-2006: Emulsion-based products for makeup. General specifications

STB 1886-2008: Cosmetic nail care products. General specifications

STB 1949-2009: Cosmetic gels. General specifications

TsPI 6/32: Technological indications of the coloring of metal structures of railway bridges in operation

TU 102-199-78: Therapeutic and prophylactic unit for hot dry baths

TU 1390-010-86695843-2011: Steel pipes and pipeline components welded with an internal anti-corrosion coating based on a paint material with high dry residue

TU 38.303-04-04-90: Organosilicon sealants. Technical conditions

TU 6-02-115-91: Copolymer BMK-5

TU 6-05-966-76: BFT brand binder

TU 6-10-1539-76: EP-572 Enamel of various colors

TU 6-14-95-2014: Clay Leukonate

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!