GOST 28198-89
ГОСТ 28198-89
|
|
Basic environmental testing. Part 1. General and quidance
Основные методы испытаний на воздействие внешних факторов. Часть 1. Общие положения и руководство
Status: Effective - Introduced for the first time. IUS 12-1989
The standards of IEC 68 provide a number of test methods for the impact of external factors and the degree of their rigidity, establish various atmospheric conditions for measurements and tests designed to assess the performance of samples in the intended conditions of transportation, storage and all aspects of application
В стандартах МЭК 68 приводят ряд методов испытаний на воздействие внешних факторов и степени их жесткости, устанавливают различные атмосферные условия для измерений и испытаний, предназначенные для оценки работоспособности образцов в предполагаемых условиях транспортирования, хранения и всех аспектов применения
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
8/15/1989
SKU: RUSS68159
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
19 Tests »
Construction (Max) »
Standards »
Other state standards used in construction »
31 Electronics »
Welding regulations »
Welding work »
Welding regulations »
Admission Testing »
Welding regulations »
Non-destructive control »
Welding regulations »
Heat treatment »
Welding regulations »
Welding work »
Soldering »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.1 General requirements for tests on external factors »
ISO classifier »
19 TESTS »
19.040 Climatic tests »
National standards »
19 TESTS »
19.040 Climatic tests »
ISO classifier »
31 ELECTRONICS »
31.020 Electronic components in general »
National standards »
31 ELECTRONICS »
31.020 Electronic components in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Electronic engineering, electronics and communications »
E2 Elements of electronic equipment »
E29 Test methods. Packaging. Marking »
National Standards for OKSTU »
ELECTRONIC EQUIPMENT PRODUCTS. RESISTORS »
National Standards for OKSTU »
ELECTRONIC EQUIPMENT PRODUCTS. CONDENSERS »
National Standards for OKSTU »
ELECTRONIC EQUIPMENT PRODUCTS. SEMICONDUCTOR DEVICES AND INTEGRAL MICROCIRCUITS »
National Standards for OKSTU »
ELECTRONIC PRODUCTS, EXCEPT RESISTORS, CAPACITORS, SEMICONDUCTOR DEVICES AND INTEGRAL MICROCIRCUITS »
The Document References:
GOST 11478-88: Electronic consumer equipment. Norms and methods of climatic and environmental mechanical testing procedure
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 27924-88: Fire-hazard testing. Test methods. Bad-connection test with heaters
GOST 28199-89: Basic environmental, testing procedures. Part 2. Tests. Test A: Cold
GOST 28200-89: Basic environmental testing procedures. Part 2. Tests. Test B: Dry heat
GOST 28201-89: Basic environmental testing procedures. Part 2. Tests. Test Ca: Damp heat, steady state
GOST 28202-89: Basic environmental testing. Part 2. Tests. Test Sa: Simulated solar radiation at ground level
GOST 28203-89: Basic environmental testing procedures. Part 2. Tests. Test Fc and guidance: Vibration ( sinusoidal )
GOST 28204-89: Basic environmental testing procedures. Part 2. Tests. Test Ga and quidance: Acceleration, steady state
GOST 28205-89: Basic environmental testing procedures. Part 2. Tests. Guidance for solar radiation testing
GOST 28206-89: Basic environmental testing procedures. Part 2. Tests. Test J. and quidance: Mould growth
GOST 28207-89: Basic environmental testing procedures. Part 2. Tests. Test Ka: Salt mist
GOST 28208-89: Basic environmental testing procedures. Part 2. Tests. Test M: Low air pressure
GOST 28209-89: Basic environmental testing procedures. Part 2. Tests. Test N: Change of temperature
GOST 28210-89: Basic environmental testing procedures. Part 2. Tests. Test Q: Sealing
GOST 28211-89: Basic environmental testing procedures. Part 2. Tests. Test T: Soldering
GOST 28212-89: Basic environmental testing procedures. Part 2. Tests. Test U: Robustness of terminations and integral mounting devices
GOST 28213-89: Basic environmental testing prosedures. Part 2. Tests. Test Ea and guidance: Shock
GOST 28214-89: Basic environmental testing procedures. Part 2: Tests. Guidance for damp heat tests
GOST 28215-89: Basic environmental testing procedures. Part 2. Tests. Test Eb and quidance: Bump
GOST 28216-89: Basic environmental testing procedures. Part 2. Tests. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
GOST 28217-89: Basic environmental testing. Part 2. Tests. Test Ec: Drop and Topple, primarily for equipment-type specimens
GOST 28218-89: Basic environmental testing procedures. Part 2. Tests. Test Ed: Free fall
GOST 28219-89: Basic environmental testing procedures. Part 2. Tests. Guidance on change of temperature tests
GOST 28220-89: Basic environmental testing procedures. Part 2. Tests. Test Fd: Random vibration wide band. General requirements
GOST 28221-89: Basic environmental testing procedures. Part 2. Tests. Test Fda: Wide band random vibration. High reproducibility
GOST 28222-89: Basic environmental testing procedures. Part 2. Tests. Test Fdb: Random vibration wide band. Reproducibility medium
GOST 28223-89: Basic environmental testing procedures. Part 2. Tests. Test Fdc: Random vibration, wide band. Reproducibility low
GOST 28224-89: Basic environmental testing procedures. Part 2. Test Z/AD. Composite temperature and humidity cyclic test
GOST 28225-89: Basic environmental testing procedures. Part 2. Tests. Test Z/AMD: Combined sequential cold, low air pressure and damp heat test
GOST 28226-89: Basic environmental testing procedures. Part 2. Tests. Test Kc: Sulphur dioxide test for contacts and connections
GOST 28227-89: Basic environmental testing procedures. Part 2. Tests. Test Kd: Hydrogen sulphide test for contacts and connections
GOST 28228-89: Basic environmental testing procedures. Part 2. Tests. Guidance on test T: Soldering
GOST 28229-89: Basic environmental testing procedures. Part 2. Tests. Test XA and guidance. Immersion in cleaning solvents
GOST 28230-89: Basic environmental testing. Part 2. Tests. Guidance to test Kd: Hydrogen sulphide test for contacts and connections
GOST 28231-89: Basic environmental testing procedures. Part 2. Tests. Mounting of components, equipment and other articles for dynamic tests including shock (Ea), bump (Eb), vibration (Fc and Fd) and steady-state acceleration (Ga) and guidance
GOST 28232-89: Basic environmental testing procedures. Part 2. Tests. Guidance on the application of the tests of IEC publication 68 to simulate the effects of storage
GOST 28233-89: Basic environmental testing procedures. Part 2. Tests. Guidance to test Kc: Sulphur dioxide test for contacts and connections
GOST 28234-89: Basic environmental testing procedures. Part 2. Tests. Test Kb: Salt mist, cyclic (sodium chloride solution)
GOST 28235-89: Basic environmental testing procedures. Part 2. Tests. Test Ta: Soldering. Solderability testing by the wetting balance method
GOST 28236-89: Basic environmental testing procedures. Part 3. Background information. Section 1. Cold and dry heat tests
GOST 30509-97: Microclimates inside products
The Document is Referenced By:
GOST 16019-2001: Equipment for land mobile radio communication. Requirements for mechanical and environmental resistance and test methods
GOST 28199-89: Basic environmental, testing procedures. Part 2. Tests. Test A: Cold
GOST 28200-89: Basic environmental testing procedures. Part 2. Tests. Test B: Dry heat
GOST 28203-89: Basic environmental testing procedures. Part 2. Tests. Test Fc and guidance: Vibration ( sinusoidal )
GOST 28204-89: Basic environmental testing procedures. Part 2. Tests. Test Ga and quidance: Acceleration, steady state
GOST 28211-89: Basic environmental testing procedures. Part 2. Tests. Test T: Soldering
GOST 28213-89: Basic environmental testing prosedures. Part 2. Tests. Test Ea and guidance: Shock
GOST 28215-89: Basic environmental testing procedures. Part 2. Tests. Test Eb and quidance: Bump
GOST 28216-89: Basic environmental testing procedures. Part 2. Tests. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
GOST 28224-89: Basic environmental testing procedures. Part 2. Test Z/AD. Composite temperature and humidity cyclic test
GOST 28232-89: Basic environmental testing procedures. Part 2. Tests. Guidance on the application of the tests of IEC publication 68 to simulate the effects of storage
GOST 28380-89: Solderless connections. Part 1. Solderless wrapped connections. General requirements, test methods and practical guidance
GOST 28578-90: Semiconductor devices. Mechanical and climatic test methods
GOST 28608-90: Fixed resistors for use in electronic equipment. Part 1. General specification
GOST 28610-90: Fixed resistors for use in electronic equipment. Part 2. Sectional specification: fixed low-power non-wirewound resistors
GOST 28623-90: Semiconductor devices. Part 10. General specification for discrete devices and integrated circuits
GOST 28627-90: Electromechanical components for electronic equipment. General specifications
GOST 28811-90: Electromechanical switches for use in electronic equipment. Sectional specification for lever (toggle) switches
GOST 28896-91: Fixed capacitors for use in electronic equipment. Part 1. General specifications
GOST 28897-91: Fixed capacitors for use in electronic equipment. Part 11. Sectional specification. Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
GOST 28997-91: Inductor and transformer cores for telecommunications equipment, Part 1. General specifications
GOST 28998-91: Inductor and transformer cores for telecommunication. Part 2. Sectional specification magnetic oxide cores for inductor applications
GOST 29000-91: Inductor and transformer cores for telecommunication. Part 3. Sectional specification magnetic oxide cores for broad-band transformers
GOST 29002-91: Inductor and transformer cores for telecommunication. Part 4. Sectional specification magnetic oxide cores for transformers and chokes for power applications
GOST 29004-91: Cores for inductors and transformers for telecommunications. Part 1. Measuring methods
GOST 29034-91: Fixed resistors for use in electronic equipment. Part 5. Sectional specification : fixed precision resistors
GOST 30011.5.1-2012: Low-voltage switchgear and control gear. Part 5-1. Control circuit devices and switching elements. Section 1. Electromechanical control circuit devices
GOST 30012.1-2002: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts
GOST 30012.1-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts
GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General
GOST 32321-2013: Alarms guarding surface shock-contact glass break detectors for use in buildings. General requirements and test methods
GOST 33897-2016: Railway telecommunications. Safety requirement control methods
GOST 34025-2016: Alarms guarding surface sonic glass break detectors for use in buildings. General technical requirements and test methods
GOST 4404-78: Graphite for manufacture of slate-pencils. Technical requirements
GOST EN 1760-1-2004: Safety of machinery. Pressure sensitive protective devices. Part 1. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
GOST IEC 60127-6-2013: Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
GOST IEC 60384-14-2015: Fixed capacitors for use in electronic equipment. Part 14. Sectional specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
GOST IEC 60947-1-2014: Low-voltage distribution and control equipment. Part 1. General rules
GOST IEC 60947-1-2017: Low-voltage distribution and control equipment. Part 1. General rules
GOST IEC 60947-5-4-2014: Low-voltage switchgear and control gear. Part 5-4. Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests
GOST IEC 61020-1-2016: Electromechanical switches for use in electrical and electronic equipment. Part 1. Generic specification
GOST IEC 61210-2011: Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
GOST IEC 61984-2016: Connectors. Safety requirements and tests
GOST R 22.1.16-2015: Safety in emergencies. Technical tools of natural and technological emergencies monitoring. Test methods
GOST R 50030.5.1-2005: Low-voltage switchgear and controlgear. Part 5. Control circuit devices and switching elements. Section 1. Electromechanical control circuit devices
GOST R 50030.5.1-99: Low-voltage switchgear and control gear. Part 5.1. Control circuit devices and switching elements. Electromechanical control circuit devices
GOST R 50292-92: Fixed capacitors for use in electronic equipment. Part 8. Sectional specification. Fixed capacitors of ceramic dielectric class 1
GOST R 50294-92: Fixed capacitors for use in electronic equipment. Part 9. Sectional specifications: fixed capacitors of ceramic dielectric, class 2
GOST R 50296-92: Fixed capacitors for use in electronic equipment. Part 10. Sectional specification: fixed multilayer ceramic chip capacitors
GOST R 50319-92: Electromechanical switches for use in electronic equipment. Sectional specification for in-line package switches
GOST R 50320-92: Electromechanical switches for use in electronic equipment. Sectional specification for pushbutton switches
GOST R 50321-92: Electromechanical switches for use in electronic equipment. Sectional specification for sensitive switches
GOST R 50477-93: Electromechanical switches for use in electronic equipment. Blank detail specification for rotary switches
GOST R 50478-93: Electromechanical switches for use in electronic equipment. Blank detail specification for lever (toggle) switches
GOST R 50658-94: Alarm systems. Part 2. Requirements for intruder alarm systems. Section 4. Ultrasonic Doppler detectors for use in buildings
GOST R 50659-2012: Microwave Doppler detectors for use in buildings and open areas. General requirements and test methods
GOST R 50659-94: Alarm systems. Part 2. Requirements for intruder alarm systems. Section 5. Microwave Doppler detectors for use in buildings
GOST R 50736-95: Antenna-feeder devices of systems of land mobile radiocommunication. Types, basic parameters, technical requirements and methods of measurements
GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General
GOST R 51017-2009: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
GOST R 51053-97: Safes locks. Requirements and test methods for resistance to criminal opening without lock breakage and to burglary
GOST R 51057-2001: Fire fighting equipment. Portable fire extinguishers. General technical requirements. Test methods
GOST R 51186-98: Alarm sonic passive glass break detectors for use in buildings. General technical requirements and methods of tests
GOST R 51242-98: Mechanical protective constructions and electromechanical protective constructions for doorways and windows ventings. Technical requirements and test methods for breaking resistance
GOST R 52434-2005: Active infra-red detectors. General technical requirements and test methods
GOST R 52435-2005: Technical means of intruder alarm systems. Classification. General technical requirements and test methods
GOST R 52650-2006: Combined microwave infra-red intrusion detectors for rooms. General technical requirements and test methods
GOST R 52651-2006: Microwave intrusion detectors for perimeters. General technical requirements and test methods
GOST R 52651-2022: Linear radio-wave intrusion detectors for perimeters. General technical requirements and test methods
GOST R 52933-2008: Capacitance intrusion detectors for rooms. General technical requirements and test methods
GOST R 53284-2009: Fire engineering. Generators of extinguishing aerosol. General technical requirements. Test methods
GOST R 53285-2009: Fire engineering. Portable generators of extinguishing aerosol. General technical requirements. Test methods
GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods
GOST R 53702-2009: Alarms guarding surface vibration detectors for blocking of structures and safes. General technical requirements and test methods
GOST R 54455-2011: Alarm systems. Environmental test methods
GOST R 54832-2011: Alarms are guarding point magnetic contact. General requirements and test methods
GOST R 54958-2012: Railway telecommunications. Safety requirement control methods
GOST R 55150-2012: Combined passive infrared ultrasonic intrusion detectors for use in buildings. General technical requirements and test methods
GOST R 55492-2013: Electronics assembly technology. Part 3. Selection guidance of environmental and endurance test methods for solder joints
GOST R 57445-2017: Railway technical means. General requirements for methods of life time estimation
GOST R 57557-2017: Hydroacoustic alarm intruder means and systems. General technical requirements and test methods
GOST R IEC 1007-96: Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
GOST R IEC 1020-3-1-94: Electromechanical switches for use in electronic equipment. Blank detail specification for in-line package switches
GOST R IEC 1020-5-1-94: Electromechanical switches for use in electronic equipment. Blank detail specification for pushbutton switches
GOST R IEC 1020-6-1-94: Electromechanical switches for use in electronic equipment. Blank detail specification for sensitive switches
GOST R IEC 127-6-99: Miniature fuses. Part 6. Fuse-holders for miniature cartridge fuse-links
GOST R IEC 60122-1-2009: Quartz crystal units of assessed quality. Part 1. Generic specification
GOST R IEC 60384-1-2003: Fixed capacitors for use in electronic equipment. Part 1. General specifications
GOST R IEC 60384-14-2004: Fixed capacitors for use in electronic equipment. Part 14. Sectional specification on fixed capacitors for electromagnetic interference suppression and connection to the supply mains
GOST R IEC 60945-2007: Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results
GOST R IEC 61210-99: Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
GOST R IEC 61587-1-2013: Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Part 1. Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis
GOST R IEC 61969-1-2013: Mechanical structures for electronic equipment. Outdoor enclosures. Design guidelines
GOST R IEC 793-1-93: Optical fibres. General specifications
OST 32.146-2000: Devices of railway automation, telemechanics and telecommunications. General specification requirements
PNST 342-2018: Intelligent transportation systems. Automatic vehicle and equipment identification. Electronic registration of vehicle identification data. Part 2. Performance requirements
PNST 674-2022: Oil and gas industry. Underwater production systems. Chambers for launching and receiving means of cleaning and diagnostics of pipelines. General specifications
STA 25.03.02-2004: Combined security system
STB IEC 61000-4-2-2011: Electromagnetic compatibility. Part 4-2. Test and measurement methods. Electrostatic discharge stability tests
STB IEC 61558-1-2007: Safety of power transformers, power sources, electric reactors and similar appliances. Part 1. General requirements and test methods
|
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
