GOST 2991-85
ГОСТ 2991-85
|
|
Wooden uncollapsible cases for weights up to 500 kg. General specifications
Ящики дощатые неразборные для грузов массой до 500 кг. Общие технические условия
Status: Effective. The limitation of effectiveness has been lifted: Resolution of the State Standard No. 554 of 04.24.91
The standard applies to non-collapsible plank dense and lattice boxes for goods weighing up to 500 kg and should be used in the development of standards or other regulatory and technical documentation for boxes intended for packaging specific types of products. The standard does not apply to multi-turn, wire-reinforced boxes, boxes for special cargo, as well as wooden cases.
Стандарт распространяется на дощатые неразборные плотные и решетчатые ящики с суммой просветов в каждой стенке до 50 % включ. для грузов массой до 500 кг, предназначенные для упаковывания, хранения и транспортирования конкретных видов продукции. Стандарт не распространяется на многооборотные ящики, проволоармированные ящики, ящики для грузов специального назначения, а также на деревянные футляры.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
10/29/1985
SKU: RUSS68172
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
10. Production »
10.9 Packaging, storage, transportation »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.6 Testing and control of wood products »
4.6.3 Tara wood »
ISO classifier »
55 PACKAGING AND DISTRIBUTION OF GOODS »
55.160 Mailboxes. Boxes. Crates »
National standards »
55 PACKAGING AND DISTRIBUTION OF GOODS »
55.160 Mailboxes. Boxes. Crates »
National Standards for KGS (State Standards Classification) »
Latest edition »
D Vehicles and packaging »
D7 Wooden, paper, cardboard containers »
D71 Wooden boxes »
As a Replacement Of:
GOST 2991-76: Wooden uncollapsible cases for weights up to 500 kg. General specifications
The Document References:
GOST 14192-96: Cargo marking
GOST 15612-85: Products of wood and wooden materials. Methods for determining surface roughness parameters
GOST 16561-76: Metal accessories for wood containers. Specifications
GOST 16588-91: Sawn products and wooden details. Methods for determining moisture content
GOST 17305-91: Wire of carbon construction steel
GOST 18211-72: Transport tare. Compression test method
GOST 18425-73: Complete, filled transport packages. Vertical impact test by dropping
GOST 19414-90: Solid glued wood. General requirements for glued finger joints
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 21100-93: Transportation packages produced from wooden packing parts. Sizes, forming, marking, transportation and storage
GOST 21136-75: Complete, filled transport packages-vibrations test at fixed low frequency
GOST 21140-88: Containers
GOST 2140-81: Visible defects, of wood. Classification, terms and definitions, methods of measurement
GOST 24454-80: Sawn timbers of coniferous species
GOST 25064-81: Complete filled transport packages. Horizontal impact tests
GOST 26838-86: Wooden boxes and roof boardings. Standards of mechanical strength
GOST 2695-83: Sawn timber of leaf-bearing species
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 3560-73: Sealing tepe
GOST 380-2005: Common quality carbon steel. Grades
GOST 380-94: Normal quality carbon steel
GOST 4028-63: Building nails. Construction and dimensions
GOST 4034-63: Round box nails. Construction and dimensions
GOST 503-81: Cold-rolled low-carbon steel strip. Specifications
GOST 7016-82: Products of wood and wooden materials. Parameters of surface roughness
GOST 7897-83: Blanks of hardwood timber
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 9330-76: Principal joints of details of wood and wooden materials. Types and dimensions
GOST 99-96: Rotary cut veneer
The Document is Referenced By:
GOST 10015-75: Gummed paper for decalcomania
GOST 10028-81: Glass capillary viscosimeters. Specifications
GOST 10092-2006: Cupro-nickel tubes for heat-exchange apparatus. Specifications
GOST 10092-75: Cupro-nickel tubes for heat-exchanging apparatus. Specifications
GOST 10131-93: Wooden boxes and boxes from timber-based materials for the food industry, agriculture, and matches
GOST 10153-70: High refractory silicon carbide products. Specifications
GOST 10155-2016: Manganin uninsulated wire. Specification
GOST 10155-75: Manganin uninsulated wire
GOST 10160-75: Magnetically soft precision alloys
GOST 1018-2015: Aluminium, copper, brass and cupronickel strips for capsules. Specifications
GOST 1018-77: Bands aluminium, copper, brass and cupronikel for capsules. Specifications
GOST 10264-82: Light signaling fittings
GOST 10285-81: Insert blanks for upsetting tools and insert blanks for parting blades made of cemented carbides. Specifications
GOST 1028-79: Black powder. General specification
GOST 10292-74: Constructive glass-cloth-base laminate. Specifications
GOST 10297-94: Indium. Specifications
GOST 10298-2018: Тechnical selenium. Specifications
GOST 10298-79: Technical selenium. Specifications
GOST 10350-81: Wooden cases for light industry produce. Specifications
GOST 10362-2017: Pressure rubber hoses with thread reinforcement without end fittings. Technical conditions
GOST 10362-76: Pressure hoses of vulcanized rubber with thread reinforcement and without end fitting. Specifications
GOST 10377-78: Colorless glass for gas masks and goggles. Specifications
GOST 1048-2016: Strips of aluminium bronze for springs. Specifications
GOST 1048-79: Strips of aluminium bronze for springs. Specifications
GOST 1049-2015: Manganese nickel wire. Specifications
GOST 1049-74: Manganese nickel wire
GOST 10533-86: Cold-rolled thermostatic bimetal strip
GOST 10597-87: Painting brishes. Specifications
GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw
GOST 1066-2015: Brass wire. Specifications
GOST 10667-90: Sheet organic glass. Specifications
GOST 1066-90: Brass wire
GOST 10678-76: Thermal orthophosphoric acid. Specifications
GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage
GOST 10693-81: Hermetic capacitor bushings designed for rated voltages 110 kv and more
GOST 10703-73: Aluminium sheets for graphic arts industry. Specifications
GOST 10731-85: Surface-type evaporators for steam-turbine power stations
GOST 10778-83: Spatulos. Specifications
GOST 10831-87: Paint rolls specification
GOST 1089-82: Antimony. Specifications
GOST 10905-86: Surface plates and face-plates. Specifications
GOST 10928-90: Bismuth. Specifications
GOST 10944-2019: Manual and locking taps for water heating systems of buildings. General specifications
GOST 10944-75: Control valves of the heating installations for building water heating systems
GOST 10944-97: Manual control and stop valves for building water heating systems. General specifications
GOST 10957-74: Siliconorganic liquids 132-24 and 132-25. Specifications
GOST 10958-78: Protective glasses for apparatus of general industrial application. Specifications
GOST 10988-2016: Oxygen-free copper bars for electrovacuum industry. Specifications
GOST 10988-75: Oxygen-free copper bars for electrovacuum industry. Specifications
GOST 11002-80: Wooden cases reinforced with wire. General specifications
GOST 11004-84: Principal ventilation mine blowers
GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications
GOST 11142-78: Plate boxes for personal defense means. Specifications
GOST 11383-2016: Thin-walled copper and brass tubes. Specification
GOST 11383-75: Thin-walled copper and brass tubes
GOST 11435-75: Blacksmith's hand and hammer tools. Technical requirements
GOST 11442-90: General-purpose axial fans
GOST 11476-79: Control cash machines. Specifications
GOST 1150-2018: Boiler zinc plates. Specifications
GOST 1150-72: Boiler zinc plates. Specifications
GOST 1153-2019: Brackets for washbasins and sinks. Technical specifications
GOST 1153-76: Supports for lavatories and sinks. Technical requirements
GOST 11614-2019: Semi-automatic flush taps. Technical specifications
GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications
GOST 11732-78: Horizontal jigging conveyers. Specification
GOST 1173-93: Copper strips. Specifications
GOST 11801-74: Foundry moulding and finishing tool. Specifications
GOST 1180-71: Zinc anodes. Specifications
GOST 1180-91: Zinc anodes. Specifications
GOST 11945-78: Vulcanized fibre tubes. Specifications
GOST 11947-90: Complete sets of light filter-lens and lens for railway lens signal lights. Specifications
GOST 11996-79: Batch-type mixers for rubber. General specifications
GOST 12.4.004-74: Filtering protective mask RPG-67
GOST 12.4.035-78: Protective face shields
GOST 12.4.087-84: Occupational safety standard system. Building. Building helmets. Specifications
GOST 12.4.089-86: Occupational safety standards system. Building. Safety belts. General technical specifications
GOST 12.4.121-83: Industrial filtering gas-masks
GOST 12.4.238-2013: Occupational safety standards system. Air breathing self-contained apparatus. General technical requirements and testing methods
GOST 12.4.253-2013: Occupational safety standards system. Personal eyes protection means. General technical requirements
GOST 123-2008: Cobalt. Specifications
GOST 123-2018: Cobalt. Specifications
GOST 12367-85: Tube mills of grinding units. General technical specifications
GOST 123-78: Cobalt. Technical requirements
GOST 12393-2013: Line fittings for overhead system of railways. General common requirements
GOST 12393-2019: Rail contact network fittings linear. General specifications
GOST 12393-77: Fittings for overhead system of electric railways. General specifications
GOST 123-98: Cobalt. Specifications
GOST 12525-85: Grade reference cetane. Specifications
GOST 12601-76: Zinc powder. Specifications
GOST 12617-78: Ship's cargo winches. General specifications
GOST 12670-88: Porcelain disk insulators for contact systems of electrified railroads
GOST 12738-77: Glass bulbs with graduated neck. Technical specification
GOST 12766.1-90: High electrical resistant wire made of precision alloys
GOST 12766.2-90: Strip from precision high electric resistance alloys
GOST 12766.5-90: Flattened strip of high electric resistance precision alloys
GOST 12797-77: Gallium technical. Specifications
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12855-77: Rubber sheet for transformers. Specifications
GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications
GOST 12893-83: Single-seated, double-seated and cage control valves.
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 13.1.302-87: Reprography. Micrography. Vesicular film. General specifications
GOST 13.1.303-88: Reprography. Micrography. Photo-thermoplastic films. General technical conditions
GOST 13.1.305-93: Reprography. Micrography. Diazotype films. General specifications
GOST 13.1.512-97: Reprography. Micrography. Readers. General specifications
GOST 13032-77: Polymethylsiloxane fluids. Specifications
GOST 13078-81: Sodium glass liquid. Technical conditions
GOST 13083-2016: Rods of nickel and nickel-silicon alloys. Specifications
GOST 13083-77: Rods of nickel and nickel-silicon alloys. Technical requirements
GOST 13084-88: Powders of high-alloyed steels and alloys. Specifications
GOST 13240-78: Blanks of optical glass. Specifications
GOST 13276-79: Overhead line hardware. General specifications
GOST 13354-91: Gated wooden patterns. Specifications
GOST 13357-87: Boxes of planks for confectionary. Specifications
GOST 13358-84: Board boxes for canned foods. Specifications
GOST 13403-77: Covers made of refractory compounds for thermoelectric thermometers. Specification
GOST 13448-82: Plastic ventilation grilles. Technical conditions
GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications
GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)
GOST 13548-2016: Thin-walled tubes of nickel and nickel alloys. Specification
GOST 13548-77: Thin-walled tubes of nickel and nickel alloys
GOST 13556-91: Building tower pillars building tower pillars
GOST 13568-75: Power transmission
GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications
GOST 13751-86: Trimmed mica for heating elements, inspection windows of industrial furnaces and domestic apparatus. Specifications
GOST 13752-86: Trimmed muscovite mica for water columns of high-pressure boilers. Specifications
GOST 13753-86: Trimmed muscovite mica for brush-holders. Specifications
GOST 13815-82: Fire foam sprinklers and drenchers
GOST 13871-78: Ceramic insulators for voltage to 1000 V. General specifications
GOST 13877-80: Sucker rods and couplings
GOST 13877-96: Sucker rods and sucker rod couplings. Specifications
GOST 13996-2019: Ceramic tiles. General specifications
GOST 13996-84: Facade ceramic tiles and carpets thereof. Specifications
GOST 13996-93: Facade ceramic tiles and carpets of them. Specifications
GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications
GOST 14081-78: Wire of precision alloys with specified temperature coefficient of linear expansion. Specifications
GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications
GOST 14117-85: Strip made from precision alloys for elastic elements
GOST 14118-85: Wire made of precision alloys, designed for elastic elements
GOST 14119-85: Rods from precision alloys for elastic elements
GOST 14167-83: Turbine cold water meters
GOST 14177-88: Spindles with built-in drive
GOST 14233-84: Supply transformers for domestic radio equipment. General specifications
GOST 14279-79: Sleeved water collecting. Technical conditions
GOST 14286-69: Wrenches for fire connecting equipment. Specifications
GOST 14333-79: Rubber working mills. General specifications
GOST 14613-83: Fibreboard. Specifications
GOST 1467-93: Cadmium. Specifications
GOST 1468-90: Cadmium anodes. Specifications
GOST 14901-93: Moulds for the manufacture of industrial rubber articles
GOST 14907-88: Dictaphones
GOST 14955-77: Quality round steel with a special surface finish
GOST 14965-80: Three-phase synchronous generators of power over 100 kw
GOST 15035-80: Underground scraper winches
GOST 15040-2016: Oxygen-free copper pipes. Specification
GOST 15040-77: Oxygen-free copper pipes
GOST 15130-86: Optical quartz glass
GOST 15167-93: Ceramic sanitary ware. General specifications
GOST 1532-81: Viscosimeters of relative viscosity. Specifications
GOST 15471-2014: Ribbons and strips made of oxygen-free copper for electronics. Specifications
GOST 15471-77: Strips and ribbons of oxygen-free copper for electronics. Specifications
GOST 15515-2016: Nickel electrolyzed strips. Specifications
GOST 15515-70: Nickel electrolyzed strips. Specifications
GOST 15595-84: Die-casting machines
GOST 15623-84: Wooden cases for tools and accessories. Specifications
GOST 15834-2016: Beryllium bronze wire. Specification
GOST 15834-77: Wire from beryllium bronze
GOST 15841-88: Wooden boxes for the production of agricultural and tractor machine-building industry
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 15876-90: Gauges for products made from wood and wooden materials
GOST 15880-83: Electric drills
GOST 15885-2018: Tin-zinc-lead bronze ribbons and strips. Specifications
GOST 15899-93: 1,1,2,2,-tetrafluorodibromethane (khladon 114B2). Specifications
GOST 1594-69: Apparatus for quantitative determination of water content in petroleum, food and other products. Specifications
GOST 1595-90: Aluminium-manganese bronze strips and ribbons. Specifications
GOST 15976-81: Perforated and perforated-corrugated vinyl plastic film. Specifications
GOST 16014-78: Diamond rollers for dressing of abrasive wheels. Specifications
GOST 16078-70: Tube connections on internal cone. Technical requirements
GOST 16099-80: Niobium in ingots. Specifications
GOST 16100-79: Niobium bricks. Technical requirements
GOST 16115-88: Diamond segment cut-off wheels of 1a1rss/c1 and1a1rss/c2 forms
GOST 16120-86: Low-current timers
GOST 16121-86: Weak-current electromagnetic relays
GOST 16148-79: Wooden boxes for rolling bearings. Specifications
GOST 16153-80: Monocrystalline germanium. Specifications
GOST 16162-85: Standard reducers. General specifications
GOST 16214-86: Tape polyvinylchloride electro insulation
GOST 16287-77: Glass industrial electrodes for determination hydrogan ion activation SSI. Specifications
GOST 16349-85: Cyclic mixers for building materials
GOST 16357-83: Nonlinear resistor-type arresters for standard ac voltage
GOST 16358-2019: Copper tapes for coaxial trunk cables. Technical conditions
GOST 16358-79: Copper strips for coaxial main cables. Specifications
GOST 1639-2009: Non-ferrous metals and alloys scrap and waste. General specifications
GOST 1639-78: Non-ferrous metals and alloys scrap and waste. General specifications
GOST 16398-81: Calenderer vinyl plastic film. Specifications
GOST 1639-93: Non-ferrous metals and alloys scrap and waste. General specifications
GOST 1641-75: Paper. Packing marking, transportation and storage
GOST 16508-70: Insulating silicon varnishes. Specifications
GOST 16511-86: Wooden boxes for electrical equipment. Specifications
GOST 16518-96: Machine vice with hand and mechanical drives
GOST 16528-87: Rectangular magnetic plates
GOST 16536-90: Wooden boxes for automotive industry products
GOST 16549-2019: Cast iron plug-through cranes, coupling cast iron, for nominal pressure PN? 1.0 MPa (10 kgf / cm2) with a plug for draining water
GOST 1663-2016: Glasses for liquid level indicators. Specifications
GOST 1663-81: Glasses for liquid level indicators. Specifications
GOST 167-2018: Lead tubes. Specifications
GOST 167-69: Lead tubes. Specifications
GOST 16774-2015: Copper tubes of rectangular and square sections. Specifications
GOST 16774-78: Copper pipes of rectangular and square section
GOST 16854-2016: Armchairs for auditoriums. General technical conditions
GOST 16854-91: Auditorium arm-chairs. General specifications
GOST 17017-71: Carbide tools for making holes in building materials. Technical requirements
GOST 17019-78: Fixing parts for pipelines and cables. Specifications
GOST 17041-77: Rulers for drawing instruments. Specifications
GOST 17151-2019: Utensils made of sheet aluminum. General specifications
GOST 17151-81: Cooking utensils made
GOST 17166-71: Accessory tool for metal-cutting machines. General technical requirements
GOST 17217-2018: Tubes of copper-nickel alloy МНЖ 5-1. Specifications
GOST 17217-79: Copper-nickel alloyed tubes grade Mnzh 5-1
GOST 17269-71: Gas- and dust-protecting filtering respirators Ru-60m and Ru-60mu
GOST 17431-72: Powder material. M-MP alloy Sheets. Specifications
GOST 17432-72: Powder material M-MP alloy Forgings and Rods. Specifications
GOST 17435-72: Drawing rulers. Specifications
GOST 17478-72: Moulding material Дcb. Specifications
GOST 17478-95: Moulding materials. Measuring glass-fibre-base laminate and granulated glass-fibre-base laminate. Specifications
GOST 17493-80: Electric machine frequency converters with power rating 250 kw up
GOST 17519-87: Rectangular electromagnetic chucks
GOST 17581-72: Mechanical signal flags of warning means. Design, dimensions and technical requirements
GOST 1761-2016: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 17612-89: Ceramic acid-resistant pocking rings. Specifications
GOST 17614-2018: Technical tellurium. Technical requirements
GOST 17614-80: Tellurium technical. Technical requirements
GOST 1761-92: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 17622-72: Industrial organic plastic. Specifications
GOST 17675-87: Flexible electrical insulating tubes
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 17716-91: Looking-glasses. General specifications
GOST 17717-79: Alternating-current load-break cutouts for voltages of 3 to 10 kv
GOST 1789-2013: Beryllium bronze strips and tapes. Specifications
GOST 1789-70: Beryllium bronze strips and ribbons. Specifications
GOST 1790-2016: Wire made of chromel alloy T, alumel, copes and constantan for thermoelectrodes of thermoelectric converters. Specification
GOST 1790-77: Wire made of chrome, aluminum, copper and constantan alloys for thermo electrodes of thermo-electric converters
GOST 1791-2014: Wire of nickel and copper-nickel alloys for extending wires for the thermoelectric converters. Specifications.
GOST 1791-67: Wire from nickel and copper-nickel alloys for extension leads to the thermoelectric transducers.
GOST 18051-83: Wooden containers for heat-insulating materials and products
GOST 18088-83: Metal-cutting, diamond, wood-cutting and fitter's tools. Packing, marking, transportation fitter and auxiliary
GOST 18096-87: Mica details for electronic devices. Specifications
GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications
GOST 18176-79: Furniture of packing cases. Specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 18327-2018: Zinc strips for general use. Specifications
GOST 18327-73: Zinc strips for general use. Specifications
GOST 18337-80: Thallium. Specifications
GOST 18337-95: Thallium. Specifications
GOST 18394-2016: Tin plated lead and tin foil. Specifications
GOST 18394-73: Tin plated lead foil and tin foil. Specifications
GOST 18396-88: Holders for luminescent lamps and starters
GOST 18397-86: Ac high-voltage circuit breakers standard voltage 6-220 kv for frequent switching operations
GOST 18426-73: Taximeters automobile. General specification
GOST 18481-81: Glass hydrometers and cylinders. General specifications
GOST 18517-84: Garage compressors
GOST 18573-86: Wooden boxes for the production of chemical industry
GOST 18613-88: Hydraulic fluid of grades 132-10 and 132-10Д. Specifications
GOST 18617-83: Wooden cases for hardware. Specifications
GOST 18680-73: Sealing details. General specifications
GOST 18707-81: Jumpers for protection of rocketry and space-rocketry items from static electricity
GOST 18714-81: Grounding wires for the protection of aerospace crafts from static electricity
GOST 18834-83: Magnetic wire for recording harmonic signals
GOST 18846-2018: Zinc foil. Specifications
GOST 18846-73: Zinc foil. Specifications
GOST 18896-73: Steel thick-walled drums for chemical products. Specifications
GOST 18954-73: Gas sampling and storage glass apparatus and tubes (pipettes). Specifications
GOST 19031-73: Closing up for ropes and their components. Specifications
GOST 1908-88: Capacitor paper
GOST 19126-2007: Medical metallic instruments. General specifications
GOST 19126-79: Metallic medical instruments
GOST 19132-86: Contact clips for mounting in blocks
GOST 19135-80: Domestic siphons. Specifications
GOST 19191-73: Rigging screws with automatic stopping. Specifications
GOST 19261-82: Round scuttles for ships. Specifications
GOST 19261-98: Ship's side scuttles. Specifications
GOST 19263-73: Mains busways up to 1200 V, dc. General technical conditions
GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications
GOST 19316-98: Centrifugal moulds. Specifications
GOST 19324-80: Rubber protective caps. Specifications
GOST 19357-81: Copper-aluminum connection plates
GOST 19596-87: Spades
GOST 19671-91: Tungsten wire for light sources
GOST 19687-84: Electrocardiographs. General specifications
GOST 19689-80: Glass-fiber thin-layered electric heaters
GOST 19716-81: Automatic pneumatic rapier looms
GOST 19734-80: Input control devices for residential and public buildings
GOST 19752-84: Sealing metal flat gaskets for closed gates. Specifications
GOST 19755-84: Sealing metal conical gaskets for closed gates. Specifications
GOST 19775-87: Magnetic heads for tape recorders. General specifications
GOST 19783-74: Organic-silicon heat-conducting paste. Specifications
GOST 19815-74: Life-buoy
GOST 19853-74: Lubricating plugs. Specifications
GOST 19855-74: Glass mercury contact thermometers
GOST 19881-74: Potentiometric analyzers for pH-control of milk and dairy products. General specifications
GOST 19906-74: Sodium nitrite technical. Technical conditions
GOST 19908-90: Transparent quartz glass crucibles, basins, cups, flasks, funnels, test-tubes and caps. General specifications
GOST 20009-74: Switchboard lamp holder. Specifications
GOST 2015-84: Fixed plain gauges. Technical requirements
GOST 20258-87: Washing machines for glass vessels. General specifications
GOST 20292-74: Laboratory volumetric glassware. Burettes, pipettes
GOST 20305-94: Gauges for tapers with conisity of 7:24
GOST 20397-82: Technical facilities for minicomputers. General technical requirements, acceptance, methods of testing, marking, packaging, transportation and storage, manufacturer's warranties
GOST 20437-89: Moulding material AГ-4. Specifications
GOST 20463-75: Wooden cases reinforced with wire for vegetables and fruit. Specifications
GOST 20492-87: Tape recorder cassette. General specifications
GOST 20493-75: Voltage detectors. General technical requirements
GOST 20493-90: Voltage detectors. General specifications
GOST 20494-90: Operative insulating rods and portable grounding rods
GOST 20548-87: Heating hot-water boilers with heating outputs
GOST 2060-2006: Brass rods. Specifications
GOST 2060-90: Brass rods. Specifications
GOST 20707-2015: Copper and brass ribbons for radiators. Specifications
GOST 20707-80: Copper and brass ribbons for radiators. Specifications
GOST 20740-75: Beehives. Specifications
GOST 20746-84: Vice for precision machining
GOST 20783-81: Metal trays for wiring
GOST 20790-93: Medical instruments, apparatus and equipment. General specifications
GOST 20803-81: Metal boxes designed for electric wiring
GOST 20889-88: Pulleys for driving V-belts with normal sections. General specifications
GOST 20900-2014: Copper tubing for waveguides and brass right angle tubes. Specifications
GOST 20900-75: Copper and brass rectangular waveguide tubes
GOST 20958-80: Unrecorded 12,7 mm magnetic tapes with bobbin for computers. General specifications
GOST 2103-78: Belt conveyors, mobile, general purpose. Specification
GOST 2103-89: General purpose mobile belt conveyors
GOST 21180-2012: Honeycomb foundation. Specifications
GOST 21180-75: Honeycomb foundation. Specifications
GOST 21253-75: Automatic filling and metering-and-filling machines
GOST 21338-75: Knurled-head screws. Technical requirements
GOST 21339-82: Tachometers
GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
GOST 21345-78: Conical, ball and cylindrical cocks set at рnom of up to approx. 16 MPa ( 160 kgf/cm2)
GOST 21427.4-78: Cold-rolled steel electrical anisotropic strip
GOST 21448-75: Alloyed powders for welding deposit. Specifications
GOST 21449-75: Rods for welding deposit. Specifications
GOST 21519-84: Windows, balcony doors, shop-windows and stained glass panels of aluminum alloys
GOST 21546-88: Hammer dies for die forging
GOST 21557-83: The bushings and rings for metallic bellows. General specifications
GOST 21562-76: Metal-faced building panels with foam plastic thermal insulation. General specifications
GOST 2162-78: Adhesive rubberized tape. Specifications
GOST 2162-97: Adhesive rubberized tape. Specifications
GOST 21643-82: Mechanical surgical suturing devices
GOST 21646-2003: Copper and brass tubes for heat-exchange apparatus. Specifications
GOST 21646-76: Brass tubes for heat exchange apparatus
GOST 21672-82: Ships rectangular windows. Specifications
GOST 21672-99: Ships rectangular windows. Specifications
GOST 21694-82: Welding mechanical equipment. General technical requirements
GOST 21694-94: Mechanical welding equipment
GOST 2169-69: Silicon technical. Specifications
GOST 2170-2016: Strips of nickel and nickel low alloys. Specifications
GOST 2170-73: Strips of nickel and nickel low alloys. Specifications
GOST 21739-2019: Pyroscopes. Technical specifications
GOST 21739-76: Ceramic pyroscopes. Specifications
GOST 21744-83: Multilayer metal bellows. General specifications
GOST 2179-2015: Nickel and siliceous nickel wire. Specifications
GOST 2179-75: Nickel and silicon nickel wire
GOST 21804-94: Shut-Off Devices for Cylinders With Liquefied Hydrocarbon Gases With Pressure Up To 1.6 Mpa
GOST 21805-94: Pressure regulators for liquefied hydrocarbon gases at pressures up to 1.6 mPa. General specifications.
GOST 21836-88: Sight glasses for industrial units. Specifications
GOST 2187-79: Diving weights. Specifications
GOST 21930-76: Tin-lead solders in pigs. Specifications
GOST 21931-76: Tin-lead solders in the form of products. Specifications
GOST 21945-76: Seamless hot-rolled pipes from titanium-based alloys
GOST 21963-82: Cutoff wheels
GOST 2198-76: Reinforced asbestos cloth and gaskets of it. Specifications
GOST 2201-79: Hose connections for 19 mm diameter air hoses. Specifications
GOST 22045-89: Overhead travelling single-beam cranes. Specifications
GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications
GOST 22082-76: Injection mould bases, detail-blanks and details of injection moulds. Specifications
GOST 2208-91: Brass strips for general use. Specifications
GOST 2216-84: Adjustable smooth snap gauges
GOST 22178-76: Titanium and titanium alloys sheets. Specifications
GOST 22224-83: Hand flat spring dynamometers. Specifications
GOST 22229-83: Ceramic through insulators for voltage over 1000 V. General specifications
GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications
GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications
GOST 22241-76: Transportation plugs. General specifications
GOST 2224-93: Steel eye rings for wire cables
GOST 22357-87: Figure skates. General specifications
GOST 22358-87: Racing and hockey skates. General specifications
GOST 22366-93: Iron-based sintered filler ribbon electrode
GOST 22472-87: Dies for a sheet-metal stamping
GOST 22502-89: Condensing units with hermetic refrigeration compressors for commercial refrigeration machinery
GOST 22517-77: Hafnium iodide metal. Specifications
GOST 22524-77: Glass density bottles. Specifications
GOST 22546-77: Heat insulating products of foam-plastic of FRP-1. Specifications
GOST 22584-88: Rope electric hoists. Specifications
GOST 22584-96: Electric rope hoists
GOST 22638-89: Boxes made of board and wooden sheet materials for electronic products
GOST 22666-2016: Copper wire and kopel alloy wire for low-temperature thermoelectrical transducers. Specifications
GOST 22666-77: Copper and copel alloy wire for low-temperature thermocouples
GOST 22689.0-89: Polyethylene waste-pipes and fittings. General specification
GOST 22742-77: Sets of square connectors fixture of radio electronic items. Specifications
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 22827-85: General purpose self-propelled boom cranes
GOST 22853-86: Mobile buildings. General specifications
GOST 22859-77: Hydraulic auto hoisters
GOST 22861-93: Lead of high purity. Specifications
GOST 228-79: Anchor chains
GOST 22897-86: Seamless cold-deformed pipes from alloys based on titanium. Specifications
GOST 2290-76: Fim balsam. Specifications
GOST 23067-78: Electric heating equipment for public catering establishments. General specifications
GOST 23094-78: Glass butyrometers. General specifications
GOST 23120-2016: Stairways, marching, platforms and fences of steel. Specification
GOST 23120-78: Steel flights of steps, stair landings and railings. Specifications
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 23265-78: Spectacle lenses. Specifications
GOST 23267-78: Individual medicinal chests. Specifications
GOST 23289-2016: Waste water drain sanitary accessories. Specification
GOST 23289-94: Waste water drain sanitary accessories. Specifications
GOST 23412-79: Waste water drain sanitary accessories. Types and principal dimensions
GOST 23415-79: Paper tape with feed holes. General specifications
GOST 23463-79: High-purity powdery graphite. Specifications
GOST 23469.0-81: Cable sleeves
GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications
GOST 23540-79: Lifting leaf chains with closed spindles
GOST 23619-79: Refractory heat-insulating mullite-silica glass-fibrous materials and products. Specifications
GOST 23707-95: Small tools for tillage
GOST 23747-88: Doors of aluminium alloys. Specifications
GOST 23833-95: Commercial refrigeration equipment
GOST 23848-79: Motion-picture projectors for 16, 35 and 70 mm films. Marking, packing, transportation and storage
GOST 23886-91: Cadmium sheets and plates. Specifications
GOST 23912-79: Alley of copper-beryllium. Specifications
GOST 23932-79: Laboratory glassware and equipment. General technical requirements
GOST 23932-90: Laboratory glassware and equipment. General specifications
GOST 23949-80: Welding non-consumable tungsten electrodes specifications.
GOST 23951-80: Antiseptic preparation ПБT. Specifications
GOST 23981-80: Cable lugs
GOST 24030-80: Seamless pipes from corrosion-resistant steel for power plant industry
GOST 24140-80: Pipe-line fastening parts. Cramps and clamps. Specifications
GOST 24145-80: Domestic containers for bread. General specifications
GOST 24179-80: Glass filters, filter-lenses, lenses, light diffusers and deflecting glass inserts for railway transport light-signals
GOST 24201-80: Connective and fastening components of glass pipelines
GOST 24211-2003: Additives for concretes and mortars. General specifications
GOST 24211-2008: Admixtures for concretes and mortars. General specifications
GOST 24211-91: Concrete additives. General technical requirements
GOST 24303-80: Kitchen cookware, made of the ferrous and nonferrous metals
GOST 24320-2018: Utensils and covers of copper-nickel and copper-nickel-zinc alloys with silver or gold coating. General specifications
GOST 24320-80: Tableware made of cupronickel and nickel silver coated with silver or gold
GOST 24333-80: Sign of accident stopping. General specifications
GOST 24408-80: Maintenance and repair system of building machinery. Rules of passing to and receiving from overhaul machines and their components. General requirements
GOST 24568-81: Magnetic chucks. Specifications
GOST 24581-81: Asbestos-cement sandwich panels with plastic foam thermal insulation. General specifications
GOST 24618-81: Steel cleats. Specifications
GOST 24634-81: Wooden boxes for export products. General specifications
GOST 24672-81: Gauges for taper thread
GOST 24679-81: Hydraulic four-way control valves for nominal pressure to 32 MPa. Specifications
GOST 24717-2004: Refractories and refractory raw materials. Marking, packing, transportation and storage
GOST 24733-81: Single pole sockets and plugs with contact diameter 1,6 and 4,0 mm. Specifications
GOST 24741-2016: Joint for connection of crane rails to steel crane girders. Specifications
GOST 24741-81: Joint for connection of crane rails to steel crane girders. Specifications
GOST 2475-88: Wires and rolls
GOST 24788-2001: Enameled steel kitchen utensils. General specifications
GOST 24788-2018: Enamelled steel kitchen utensils. General specifications
GOST 24788-81: Enameled steel kitchen utensils.
GOST 24875-88: Small power electric machines. Tachogenerators. General specifications
GOST 2492-84: Power push-button switches and push-button control stations. General specifications
GOST 24959-81: Gauges for splinted joints
GOST 25010-81: Howks for plastering. Specifications
GOST 25084-89: Universal dies with replaceable built-up tool sets
GOST 25088-98: Ship's doors. Specifications
GOST 25105-82: Plain bearings metal bushes and half-liners for pulley-blocks and split bearing blocks. Technical requirements
GOST 25106-82: Plain bearing housings one-piece and sectional
GOST 25223-82: Wood-working equipment
GOST 25250-88: PVC film for production of food and medicine package. Specifications
GOST 25310-94: Covers of skylights. Specifications
GOST 25377-2015: Needles for injections for repeated use. Specifications
GOST 25377-82: Syringe needles for repeated use
GOST 25442-82: Molybdenum annealed strips for deep drawing. Specifications
GOST 25452-2017: High-pressure rubber hoses with metal windings without end fittings. Technical conditions
GOST 25452-90: Unarmored high-pressure rubber hoses with metal winding
GOST 25496-82: Anchors with high holding power. Specifications
GOST 25500-82: Laminated plastic sheets for electric purpose
GOST 25531-82: Lubricators. Specifications
GOST 2567-89: Technical hydrofluoric acid. Specifications
GOST 2581-78: Magnesium alloy ingots. Specifications
GOST 25834-83: Electric lamps. Marking, packing, transportation and storage
GOST 25905-2018: Aluminium foil for condensers. Specifications
GOST 25905-83: Aluminium foil for condensers. Specifications
GOST 25921-83: Paper tape for graphic devices of computers. Specifications
GOST 25930-83: Plastic covers for cylindrical connectors. Specifications
GOST 26015-83: Lattices for medical X-radiography. General specifications
GOST 26032-83: System of standardized type structures of SSI aggregated complexes. General specifications
GOST 26103-84: Electrical insulating materials
GOST 26118-84: Electric energy semiconductor converters with power 5 kV.A and higher. Marking, packing, transportation and storage
GOST 26140-84: Medical x-ray units
GOST 26145-84: X-ray medical cassettes
GOST 26221-84: Scattering suppressing linear rasters for medical roentgen apparatuses
GOST 2622-2016: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications
GOST 2622-75: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications
GOST 2624-2016: Copper and brass capillary tubes. Specification
GOST 2624-77: Copper and brass capillary tubes
GOST 26251-84: Galvanium anodes for corrosion protection. Specifications
GOST 26252-84: Niobium powder. Specifications
GOST 26346-84: Lighting buses for the ac voltage up to 660 v
GOST 26358-84: Pig iron castings
GOST 26363-84: Power generating sets and mobile electric power stations with internal combustion engines. Rules of marking, parking, transportation and storage
GOST 26429-2018: Steel structures of suspended transport tracks. Specifications
GOST 26460-85: Air separation products. Gases. Cryogens. Packing, marking, transportation and storage
GOST 26499-85: Multi-purpose household kitchen machines
GOST 26584-85: Motorcycle helmets
GOST 26590-85: Ferroalloys
GOST 26698.2-93: Underground drill rigs
GOST 26699-98: Underground drilling rigs. General specifications and test methods
GOST 2677-78: Ammonium molybdate Technical conditions
GOST 26881-86: Stationary leaden batteries
GOST 26917-2000: Underground loading machines. General technical requirements and test methods
GOST 26957-86: Variator with wide angle belt pulleys. General specifications
GOST 26957-97: Variators with wide-angle belt pulleys. General specifications
GOST 27002-86: Cooking utensils from corrosion-resistant steel
GOST 27036-86: Bellows metal expansion joints and seals
GOST 27266-87: Molybdenum wire for light sources
GOST 27358-87: Press moulds for manufacturing of plastic items
GOST 27380-87: Electric insulating structural fiberglass plastic
GOST 27386-87: Electrical insulating
GOST 2746.1-88: Plastic Edison screw holders of series e14 and e27
GOST 2748-77: Hard rubber plates, rods and tubes for electrotechnical purposes. Specifications
GOST 27513-2018: Frictional products. Marking, packing, transportation and storage
GOST 27513-87: Friction products marking, packing, transportation and storage
GOST 27544-87: Liquid-in-glass thermometers. General specifications
GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications
GOST 27584-88: Electric overhead travelling cranes and gantry cranes. General specifications
GOST 27590-2005: House-tube water-watered heat supply systems. General specifications
GOST 27590-88: Water heaters for heat supply systems
GOST 27595-88: Grinding materials and abrasive tools. Packing, marking, transportation and storage
GOST 27636-95: Stone extraction and processing equipment
GOST 27752-88: Electronic mechanical quartz desktop and wall clocks and alarm clocks
GOST 28034-89: Electric insulating varnished fabrics
GOST 28066-89: Ssi liquid chamber meters
GOST 28171-89: Gambling machines
GOST 2821-75: Strontium carbonate. Technical conditions
GOST 28244-89: Reinforced wires and cords. Specifications
GOST 28244-96: Reinforced wires and cords. Specifications
GOST 28328-89: Round electromagnetic chucks
GOST 28330-89: Asynchronous electrical machines with power from 1 to 400 kw inclusive. Motors
GOST 28408-89: Manual hoists and trolleys. General specifications
GOST 28433-90: Retrievers
GOST 28434-90: Overhead travelling stacker cranes
GOST 28439-90: Equipment of digital, fiber optic transmission systems over power lines
GOST 28456-90: Expansive dowels for building. General specifications
GOST 28660-90: Bristle brust articles. Marking, packing, transportation and storage
GOST 28670-90: Wood chemical products. Packing, marking, transportation and storage
GOST 28679-90: Steam-water heaters for heat supply systems
GOST 28724-90: Speed gas meters
GOST 28757-90: Heaters for systems of regeneration of steam turbines for steam power plants. General specifications
GOST 28785-90: Preparative ultracentrifuges and rotors
GOST 28836-90: Resistive strain-gauge
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 28841-90: Machines for fatigue testing of materials
GOST 28845-90: Machines for long time strength creep, testing and relaxation of materials. General technical requirements
GOST 28856-90: Line suspension polymeric rod insulators
GOST 28912-91: Filters for stores and filters-separators. Technical specifications
GOST 28943-91: Accessories for product of light industry. Marking, packing, transportation and storage
GOST 29093-91: Umbrellas. General specifications
GOST 29101-91: Textile glass products. Packing, marking, transportation and storage
GOST 29282-92: Writing units designed for boll-point pens. Specifications
GOST 29286-92: Magnetic tapes for domestic video recording. General specifications
GOST 2936-2016: Planc-oval scamless radiator tubes. Specifications
GOST 2936-75: Plane-oval seamless radiator tubes
GOST 297-80: Resistance welding machines
GOST 30004.1-93: Mayonnaises. General specifications
GOST 30065-93: Hubs for films and magnetic tapes. Specifications
GOST 30066-96: Electro insulating film 'Lavaril-2N'. Specifications
GOST 30095-93: Polyester moulding materials (premixes). General specifications
GOST 30137-95: Horizontal jigging conveyers. General specifications
GOST 30154-94: Domestic gas ranges for tourists. General specifications
GOST 30195-94: Submersible asynchronous electric motors
GOST 30198-94: Sport (racing) skis. Specifications
GOST 30222-95: Cone variable speed drives. General specifications
GOST 30223-95: Motorised conveyor drums. General specifications
GOST 30248-2013: Electrical carbon products. Electrical heating appliances made of carbon fibre materials. General specifications
GOST 30248-97: Electric heaters using carbon fiber materials
GOST 30273-98: Circular and rectangular electromagnetic chucks. General specifications
GOST 30275-96: Manipulators for contact spot welding. General specifications
GOST 302-79: Medical maximum glass thermometer. Specifications
GOST 30307-95: Building polymer glueing latex mastics. Specifications
GOST 30337-95: Lighting chains. General specifications
GOST 30496-97: Emergency stop valves for pneumatic systems of railway rolling stock brake equipment. General specifications
GOST 3050-77: Hose joints for flexible hoses
GOST 30531-97: Porcelain and glass pin type insulators for voltage level up to 1000 V. General specifications
GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods
GOST 30685-2000: Honing and lapping vertical machines. General specifications
GOST 30815-2002: Automatic valves for regulation of temperature in heating devices of systems of water heating of buildings. General specifications
GOST 30815-2019: Automatic thermostats of heating devices for water heating systems in buildings. General specifications
GOST 30829-2002: Transportable acetylene generators. General specifications
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding
GOST 3124-77: Hose connections for flexible hoses of monitors. Specifications
GOST 31284-2004: Air heaters for industrial and agricultural enterprises. General specifications.
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 31366-2008: Brass rods for free machining purposes. Specifications
GOST 31411-2009: Ammonium perrenat. Specifications
GOST 3145-84: Mechanical clocks with signal. General specifications
GOST 31516-2012: Medical maximum glass thermometrs. General specifications
GOST 31546-2012: Pile driving rigs. General specifications
GOST 31559-2012: Anchor supports. General pecifications
GOST 31563-2012: Pneumatic hammer drills. Technical requirements and testing methods
GOST 31592-2012: Machine reducers. General specifications
GOST 31606-2012: Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical requirements
GOST 31624-2012: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications
GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications
GOST 31832-2012: Well sucker rod pump drives. General technical requirements
GOST 31835-2012: Well sucker-rod pumps. General technical requirements
GOST 32204-2013: Current collectors of railway electric rolling stock. General specifications
GOST 32216-2013: Special railway rolling stock. General technical requirements
GOST 32309-2013: Casting utensils of aluminium alloys. General specification
GOST 32309-2019: Dishes without non-stick coating cast from aluminum alloys. General specifications
GOST 32565-2013: Safety glass for ground vehicles. General specifications
GOST 32584-2013: Steel enameled ovenware with anti-burn coating. Specifications
GOST 32590-2013: Fittings of copper and copper alloys with ends for capillary soldering or capillary brazing to copper tubes. Specifications
GOST 32591-2013: Fittings of copper and copper alloys with compression ends for use with copper tubes. Specifications
GOST 32598-2013: Tubes copper round for water and gas. Specifications
GOST 32662-2014: Polymer composite components of the ventilating equipment. Specifications
GOST 32663-2014: Polymer composite components of the pumps for special purpose. Specifications
GOST 32680-2014: Head current collection elements of pantographs of electric vehicle. General specification
GOST 3303-82: Rubber hot-water bottles
GOST 3309-84: Table and wall mechanical clocks with balance oscillator. General specifications
GOST 33118-2014: Combined materials on basis of aluminium foil. Specifications
GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications
GOST 33170-2014: Hoisting cranes. Tower cranes. Devices for installation. General requirements
GOST 33183-2014: Meggy type rubber-metal springs. Specifications
GOST 33369-2015: Fibre-reinforced thermosets for the strengthening and restoration of building structures. General specifications
GOST 33414-2015: Ceramic packaging. General specifications
GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications
GOST 33749-2016: Hydraulic clampers for railway rolling stock. General specifications
GOST 34016-2016: Cranes. Load-lifting attachment. Safety requirements
GOST 34016-2022: Hoisting machines. Load-carrying devices. Safety requirements
GOST 34101-2017: Posuda stal'naya emalirovannaya dlya detej i podrostkov. Tehnicheskie usloviya
GOST 34117-2017: Cookware and tableware made of corrosion-resistant steel for children and teenagers. Technical conditions
GOST 34196-2017: Electrolyzers for the production of aluminum. General technical conditions
GOST 34205-2017: Insulators sectional for the contact network of railways. General technical conditions
GOST 34221-2017: Seeds of medicinal and aromatic crops. Varietal and sowing characteristics. General specifications
GOST 34288-2017: Pipeline valves. Butterfly valves of thermoplastics materials. General specifications
GOST 34289-2017: Pipeline valves. Gate valves of thermoplastics materials. General specifications
GOST 34290-2017: Pipeline valves. Diaphragm valves of thermoplastics materials. General specifications
GOST 34291-2017: Pipeline valves. Check valves of thermoplastics materials. General specifications
GOST 34292-2017: Pipeline valves. Ball valves of thermoplastics materials. General specifications
GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications
GOST 34294-2017: Cryogenic pipeline valves. General specifications
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 34470-2018: Concrete refractory. General technical conditions
GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods
GOST 34904-2022: Ship pipeline valves. General specifications
GOST 3564-84: Multioutlet oil-lubricating plants. Specifications
GOST 3573-76: Canned young antlers of dapple deer. Specifications
GOST 3608-78: Rings for ring spinning and ring doubling frames. Specifications
GOST 3640-79: Zinc. Specifications
GOST 3640-94: Zinc. Specifications
GOST 400-80: Glass thermometers for testing of petroleum products. Specifications
GOST 4045-75: Hand-operated bench vice
GOST 4097-78: Cans for motion-picture rawstock, magnetic tapes and film materials. Specifications
GOST 4153-93: Pruning shears
GOST 4154-93: Pruning shears
GOST 4156-93: Pruning saws
GOST 4227-76: Canned young antlers of red deer and maral. Specifications
GOST 4229-94: Colter knives. Specifications
GOST 4230-93: Garden knives
GOST 4267-78: Long-like roller chains for coveyors and elevators. Technical conditions
GOST 4285-79: Blow-off connection for 19 mm diameter air hoses. Specifications
GOST 4295-80: Boxes made of boards for sheet glass
GOST 4411-79: Hardmetal products for mining tools. Technical requirements
GOST 4442-2014: Bands and strips of lead brass. Specifications
GOST 4442-72: Strips and bands of lead brass. Specifications
GOST 4515-93: Copper phosphorous alloys. Specifications
GOST 4645-81: Rubber condoms
GOST 4658-73: Mercury. Specifications
GOST 4748-92: Silicon-manganese bronze strips and ribbons. Specifications
GOST 4750-89: Bicycle tires
GOST 4751-73: Screw rings. Specifications
GOST 4752-2012: Cylinder copper wire. Specifications
GOST 4752-79: Copper cylinder wire
GOST 4872-75: Sintered hard alloys products for cutting tool. Specifications
GOST 489-88: Carbon paper. Specifications
GOST 494-2014: Brass tubes. Specifications
GOST 494-90: Pipes of brass
GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel
GOST 5.1878-73: Grinding burnishing six-spindel machine-tool model 6ШП-100М. Quality requirements for certified products
GOST 5.1879-73: Semi-automatic centre machine model ЦС-50. Quality requirements for certified products
GOST 5.924-71: Intermediate stations for train control tower and (railway) junction connection types ППТ-66Д and ППТ-66П. Quality requirements of certified products
GOST 5006-83: Toothed clutches. Specifications
GOST 5020-75: Liquid 'Steol-M'. Specifications
GOST 5040-78: Light-weight heat-insulating refractory and high-refractory products. Specifications
GOST 5040-96: Lightweight heatinsulating refractory and high-refractory products. Specifications
GOST 5063-2016: Ribbons of cupro-nikel alloys. Specifications
GOST 5063-73: Ribbons of cupro-nickel alloys. Specifications
GOST 5105-82: Steel fuel and oil tanks
GOST 5152-84: Gland Packing Specifications
GOST 5170-73: Repair kits for pneumatic tyres. Specifications
GOST 5187-2003: Nickel silver, german silver and monel tapes. Specifications
GOST 5187-70: Nickel silver, german silver and monel tapes. Specifications
GOST 5189-2018: Constantan strips. Specifications
GOST 5189-75: Constantan strips. Specifications
GOST 520-2002: Rolling bearings. General specifications
GOST 520-2011: Roll bearings. General specifications.
GOST 520-89: Rolling bearings. General specifications
GOST 5220-2018: Germen silver wire. Specifications
GOST 5220-78: Nickel silver wire
GOST 5221-2008: Tin-zink bronze wire. Specifications
GOST 5221-77: Tin-zinc bronze wire
GOST 5222-2016: Silicon-manganese bronze wire. Specifications
GOST 5222-72: Silicon-manganese bronze wire
GOST 529-2015: Radiator tubes. Specifications
GOST 529-78: Radiator tubes
GOST 5307-2015: Constantan uninsulated wire. Specifications
GOST 5307-77: Constantan noninsulated wire
GOST 538-2001: Locks and building hardware. General specifications
GOST 538-2014: Locks and building hardware. General specifications
GOST 538-88: Lock and building hardware
GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications
GOST 5500-2001: Stopper refractories for steel pouring from ladle. Specifications
GOST 5500-75: High-duty and refractories for steel pouring. Specifications
GOST 5534-79: Floating cranes. Specifications
GOST 5635-80: Glass dissipators for autotractor, motor-cycle and bicycle lighting and light signalling apparatus. Specifications
GOST 5638-2018: Copper roil foil for technical purposes. Specifications
GOST 5638-75: Copper roll foil for technical purposes. Specifications
GOST 5727-88: Safe glass for ground transport
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
GOST 5761-74: Valves for nominal pressure
GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications
GOST 5762-74: Pipeline industrial valves. Gate valves PN £ 250. General specifications
GOST 5862-79: Ceramic insulators and covers for voltage over 1000 V. General specifications
GOST 588-81: Hauling leaf chains
GOST 5890-78: Pipe connection with screwed ends. Specifications
GOST 5946-79: Conveyors, chain, suspension, load-carrying, general purpose. Specification
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 5976-90: Centrifugal fans for general use
GOST 598-2020: General purpose zinc sheets. Specifications
GOST 598-90: General-purpose zinc sheets. Specifications
GOST 6052-79: Pasteurized granular sturgeon caviar
GOST 6086-75: Bits for drills. Technical requirements
GOST 617-2006: General-purpose copper and brass tubes of round section. Specifications
GOST 617-90: Copper tubes. Specifications
GOST 618-2014: Aluminum foil for technical purposes. Specifications.
GOST 618-73: Aluminum foil for technical purposes. Specifications
GOST 6235-2020: Nickel sheets and strips. Specifications
GOST 6235-91: Strips and ribbons of nickel. Specifications
GOST 6286-2017: High pressure rubber hoses with metal braids without end fittings. Technical conditions
GOST 6286-73: High-pressure rubber hoses with metal braids without fittings
GOST 6495-89: Microphones. General specifications
GOST 6616-94: Thermoelectric converters. General specifications
GOST 6625-85: Mine local ventilating fans
GOST 6651-94: Thermal converters of resistance. General technical requirements and test methods
GOST 6658-75: Products of paper and cardboard
GOST 6688-2016: Brass bars of rectangular section. Specifications
GOST 6737-80: Drawing frames for cotton and chemical fibers
GOST 6815-79: Mains and distribution busways up to 1000 V a.c. General specifications
GOST 6859-72: Apparatus for liquids sampling and measuring. Specifications
GOST 6918-81: Line screen grease strainers. Specifications
GOST 6968-76: Acetic acid produced
GOST 703-76: Wall pendulum mechanical cloсk. General specifications
GOST 7041-71: Fire snaphook
GOST 7075-80: Manual Traveling Underrunning Cranes Specifications
GOST 7134-82: Condenser mica. Specifications
GOST 7151-74: Refractory alumino-silicate block products for glassmaking furnaces. Specifications
GOST 7183-93: Foam mixers. Specifications.
GOST 7286-81: Wooden T-squares. Specifications
GOST 7360-82: Subs for drilling strings
GOST 7368-79: Pressed sturgeon caviar
GOST 7442-79: Canned granular sturgeon caviar
GOST 745-2003: Aluminium foil for packing. Specifications
GOST 745-2014: Aluminium foil for packing. Specifications
GOST 7498-75: Fire hydraulic elevator. Specifications
GOST 7498-93: Hydro elevators for firefighting. Specifications.
GOST 7518-83: Transformers for household electrical appliances
GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage
GOST 7566-94: Metal products
GOST 7599-82: Machine-tools, metal-working
GOST 765-85: Anchor shackles. Specifications
GOST 766-74: Anchors. General specifications
GOST 767-2020: Copper anodes. Specifications
GOST 767-91: Copper anodes. Specifications
GOST 7703-74: Signalling shapes of ship. Specifications
GOST 7826-93: Strip and circular charts of registers. General specifications
GOST 7871-75: Aluminum and aluminium alloy welding wire
GOST 7890-84: Travelling single-girder suspended cranes. Specifications
GOST 7890-93: Travelling single girder suspended cranes. Specifications
GOST 7921-86: Metal shot-gun cartridge-cases. Specifications
GOST 8036-2013: Strips of brass Л90. Specifications
GOST 8036-79: Tombac strips. Specifications
GOST 8037-93: Hose branches. Specifications.
GOST 8051-83: Domestic washing machines
GOST 8054-81: Metal propellers. General specifications
GOST 8481-75: Aircraft fabrics made of glass twisted complex threads. Specifications
GOST 8483-81: Fishing taps and overshots for prospecting
GOST 8497-78: Matrosov's anchor. Specifications
GOST 8565-81: Exploration bell sockets
GOST 8591-76: The telephone canalization cable man-hole hatches
GOST 8594-80: Installation boxes for switches and plug sockets for flush wiring
GOST 860-75: Tin. Specifications
GOST 8608-79: Porcelain pin support insulators for voltage above 1000 V. General specifications
GOST 8608-96: Porcelain pin support insulators for voltage above 1000 V. General specifications
GOST 8752-79: Metal insert rubber seals for rotating. Specifications
GOST 8774-75: Lithium. Specifications
GOST 8778-81: Blanks for spectacle lenses. Technical conditions
GOST 8799-90: Starters for tubular fluorescent lamps
GOST 8894-86: Glass pipes and shaped parts thereto
Technical requirements
GOST 8907-87: Sandblast core casting machines
GOST 8984-75: Silica gel indicator. Technical conditions
GOST 8998-74: Lenses for telephone switchboards. Specifications
GOST 9018-89: Fuel dispensing pumps. General specifications
GOST 9031-75: Reference hardness standards
GOST 9070-75: Viscometers for determination of relative viscosity of paint and lacquer materials. Specifications
GOST 9074-85: Joined by pins slot cloths
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST 9231-80: Twin-shaft blenders of paddle type
GOST 9274-81: Rolls for stone separating and ceramic mixture grinding
GOST 9284-75: Slides for micropreparations. Specifications
GOST 9298-77: Accumulator ebonite monoblocks for aviation. Specifications
GOST 931-90: Brass sheets and strips. Specifications
GOST 9321-73: Rollers. Specifications
GOST 9325-79: Ammonium salts. Technical conditions
GOST 9387-81: Ceramic parts for sanitary technical ware and fittings. Specification
GOST 9396-88: Boxes wooden reusable
GOST 9424-79: Hardened glasses for scuttles. Specifications
GOST 949-73: Small and medium volume steel cylinders for gases for pp ≤ 19.6 MPa (200 kgf/cm2) Specifications
GOST 9509-74: Scales and dosimeters. Knife-edges and bearings of steel. General requirements
GOST 9515-81: Piston metal rings for piston compressors. Specifications
GOST 9541-75: X-ray protective glass plates. Specifications
GOST 9559-89: Lead sheets. Specifications
GOST 9589-72: Facing tiles, polystyrene
GOST 9601-84: Power track (limit) switches. General specifications
GOST 961-89: Acid-resistant and thermostable acid-resistant ceramic tiles. Specifications
GOST 9639-71: Sheets from unplasticized polyvinylchloride (sheet vinyplast). Specifications
GOST 9653-74: Indicators of the liquid level at Pd up to 4 MPa (40 kgf / cm2). Specification
GOST 9722-79: Nickel powder. Technical requirements
GOST 9722-97: Nickel powder. Specifications
GOST 9723-73: Tin powder. Specifications
GOST 9784-75: Organic sheet glass for illuminating engineering. Specifications
GOST 9849-86: Iron powder. Specifications
GOST 9887-70: Diaphragm pneumatic actuators SSI. General specifications
GOST 9921-81: Tire hand-operated pressure gauges
GOST 9923-80: Manual fire barrel. Specifications
GOST 9984-85: Ceramic support insulators rated for voltage over 1000 v
GOST 9988-84: Pneumatic regulator devices of SSI. General specifications
GOST ED1 21482-87: Single - layer measuring metal bellows. Specifications
GOST R 12.4.013-97: Occupational safety standards system. Goggles. General specifications
GOST R 12.4.186-97: Occupational safety standards system. Air breathing self-contained apparatus. General technical requirements and testing methods
GOST R 12.4.230.1-2007: Occupational safety standards system. Personal eyes protection means. General technical requirements
GOST R 22.8.04-96: Safety in emergencies. Technical washing means for people disinfection. Disinfection shower unit. General technical requirements
GOST R 50059-92: Travelling single-girder suspended cranes. Specifications
GOST R 50139-92: Processing equipment. General specifications
GOST R 50291-92: 1,1,2,2,-tetrafluorodibromethane (Khladon 114B2). Specifications
GOST R 50342-92: Thermoelectric converters. General specifications
GOST R 50353-92: Resistive temperature transducers. General specifications
GOST R 50398-92: Fire hydraulic elevator. Specifications
GOST R 50399-92: Air-foam nozzles. Specifications
GOST R 50400-2011: Fire-fighting equipment. Hose branching. General technical requirements. Test methods
GOST R 50400-92: Hose branching. Specifications
GOST R 50401-92: Suction gauzes. Specifications
GOST R 50408-92: Foam mixers. Specifications
GOST R 50409-92: Medium expansions foam-making branch pipes. Specifications
GOST R 50428-92: Hubs for films and magnetic tapes. Specifications
GOST R 50444-92: Medical instruments, apparatus and equipment. General specifications
GOST R 50641-94: Grooved pulleys for classical and narrow V-belts. System based on datum width
GOST R 50655-94: Lighting chains. General specifications
GOST R 50703-2002: Heading machines having cutter heads mounted on booms. General technical requirements and test methods
GOST R 50827-95: Enclosures for accessories for household and similar fixed electrical installations. General requirements and methods of tests
GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 50891-96: Machine reducers. General specifications
GOST R 50895-96: Toothed clutches. Specifications
GOST R 50959-96: Samovars (hot water boilers), using hard fuel. Specifications
GOST R 50962-96: Plastics vessels and articles for economic purposes. General specifications
GOST R 51015-97: Blades for household and special use. General specifications
GOST R 51016-97: Sets of carbon steel and aluminium alloys. General specifications
GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
GOST R 51047-97: Cutters for shearers and entry-driving machines. General specifications
GOST R 51057-97: Fire engineering. Portable fire extinguishers. General technical requirements. Test methods
GOST R 51096-97: Seeds of medical and aromatic crops. Varietal and sowing characteristics. Specifications
GOST R 51114-97: Automatic water and foam fire fighting systems. Feeder. General technical requirements. Test methods
GOST R 51115-97: Fire equipment. Fire turntable combined monitors. General technical requirements. Test methods
GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications
GOST R 51162-2019: Dishes without non-stick coating cast from aluminum alloys. General specifications
GOST R 51162-98: Casting aluminium utensils. General specifications
GOST R 51177-2017: Overhead line hardware. General technical requirements
GOST R 51177-98: Overhead line hardware. General specifications
GOST R 51203-98: Rod porcelain insulators for contact net of railways. General specifications
GOST R 51204-98: Rod polymeric insulators for contact net of railways. General specifications
GOST R 51243-99: Razor systems for damp shave. General specifications
GOST R 51246-99: Pneumatic hammer drills. Technical requirements and testing methods
GOST R 51260-2017: Rehabilitation aids trainers. General technical requirements
GOST R 51260-99: Rehabilitation simulators for disabled persons. General specifications
GOST R 51268-99: Scissors. General specifications
GOST R 51396-99: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications
GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications
GOST R 51571-2000: Metal bellows expansion joints and seals. General technical requirements
GOST R 51573-2000: Tubes from alloyed brasses for heat-exchange apparatus. Specifications
GOST R 51602-2000: Pile driving rigs. General specifications
GOST R 51681-2000: Pneumatic hammer drills. Drill steels. General technical requirements
GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications
GOST R 51689-2000: Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical reguirements
GOST R 51728-2001: Stick insulators of polymeric material of tram and trolleybus contact nets to be used in polluted environmental conditions. General specifications
GOST R 51763-2001: Well sucker rod pump drives. General technical requirements
GOST R 51877-2002: Combined flexible materials for electrical insulation. General specifications
GOST R 51896-2002: Well sucker-rod pumps. General technical requirements
GOST R 52034-2003: Ceramic support insulators for voltage over 1000 V. General specifications
GOST R 52034-2008: Ceramic support insulators for voltage over 1000 V. General specifications
GOST R 52042-2003: Anchor supports. General specifications
GOST R 52116-2003: Utensils of cast-iron. General specifications
GOST R 52123-2003: Port-holes for diving hyperbaric chambers with operating pressure up to 4,9 MPa (50 kgf/sq cm). General specifications
GOST R 52145-2003: Combined materials on basis of aluminium foil. Specifications
GOST R 52217-2004: Sinking rope attachments. Specifications
GOST R 52218-2004: Shaft sinking winches. General technical requirements and test methods
GOST R 52223-2004: Steel enamelled ovenware with anti-burn coating. Specifications
GOST R 52223-2018: Enamelled steel cookware with non-stick coating. Technical specifications
GOST R 52264-2004: Pressure diving chambers. General specifications
GOST R 52279-2004: Hydraulic dampers for railway rolling stock. General specifications
GOST R 52283-2004: Fire-fighting centrifugal pumps. General technical requirements. Test methods
GOST R 52283-2019: Fire fighting equipment. Centrifugal fire pumps. General technical requirements. Test methods
GOST R 52317-2005: Honeycomb foundation. Specifications
GOST R 52318-2005: Round copper tubes for water and gas. Specifications
GOST R 52565-2006: Alternating-current circuit-breakers for voltages from 3 to 750 kV. General specifications
GOST R 52597-2006: Brass rods for free machining purposes. Specifications
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 52639-2006: Open-circuit diving apparatus. General specifications
GOST R 52683-2006: Medicine remedies for veterinary use. Packing, marking, transportation and storage
GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications
GOST R 52850-2007: Vehicles. Single-stage compressed air pumps. Technical requirements and test methods
GOST R 52859-2007: Rolling bearings. General specifications
GOST R 52921-2008: Medical maximum glass thermometers. General specifications
GOST R 52922-2008: Fittings from copper and copper alloys for capillary soldering to copper tubes. Specifications
GOST R 52936-2008: Frее-flow diving suits. General technical requirements
GOST R 52948-2008: Fittings from copper and copper alloys with compression ends for use with copper tubes. Specifications
GOST R 53249-2009: Fire-fighting equipment. Sleeved water collecting. General technical requirements. Methods of testing
GOST R 53250-2009: Fire-fighting equipment. Fire standpipe. General technical requirements. Methods of testing
GOST R 53251-2009: Fire-fighting equipment. Hand foam-nozzles. General technical requirements. Methods of testing
GOST R 53252-2009: Fire-fighting equipment. Foam mixers. General technical requirements. Methods of testing
GOST R 53253-2009: Fire-fighting equipment. Suction gauzes. General technical requirements. Methods of testing
GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods
GOST R 53287-2009: Water and foam fire fighting systems. Fire alarm hydraulic, fire foam inducer, feeder. General technical requirements. Test methods
GOST R 53323-2009: Flame arrestors and spark arrestors. General technical requirements. Test methods
GOST R 53331-2009: Fire-fighting equipment. Hand nozzles. General technical requirements. Methods of testing
GOST R 53332-2009: Fire equipment. Fire motor pumps. Main parameters. General technical requirements. Methods of testing
GOST R 53332-2019: Fire fighting equipment. Motor-pumps fire. Main parameters. General technical requirements. Test methods
GOST R 53405-2009: Copper cylinder wire. Specifications
GOST R 53409-2009: Vehicles. Friction dry clutch. General technical requirements and test methods
GOST R 53471-2009: Synchronous three-phase generators of power above 100 kW. General specifications
GOST R 53499-2009: Tombac strips. Specifications
GOST R 53648-2009: Underground diesel locomotives. General technical requirements and test methods
GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications
GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications
GOST R 53961-2010: Fire-fighting equipment. Underground fire hydrants. General technical requirements. Test methods
GOST R 53978-2010: Special railway rolling stock. General technical requirements
GOST R 54086-2010: Pressure regulators. General specifications
GOST R 54150-2010: Wire from БрКМц3-1 bronze. Specifications
GOST R 54155-2010: Enamelled steel kitchen utensils for children and teenagers. Specifications
GOST R 54156-2010: Table utensils made from stainless steel for children and teenagers. Specifications
GOST R 54158-2010: Thin-walled tubes from copper and copper alloys. Specifications
GOST R 54160-2010: Ribbons from cuprum-nickel, nickel silver and monel. Specifications
GOST R 54266-2010: Pneumatic tyres. Packing, transportation and storage
GOST R 54310-2011: Blister copper. Specifications
GOST R 54334-2011: Current collectors of railways electric rolling stock. General specifications
GOST R 54564-2011: Non-ferrous metals and alloys scarp and waste. General specifications
GOST R 54564-2022: Non-ferrous metals and alloys scrap and waste. General technical conditions
GOST R 54568-2011: Tubes from alloy МНЖ5-1. Specifications
GOST R 54577-2011: Modified wood. Specifications
GOST R 54771-2011: Mine electric locomotive transport. Trolley electric locomotives. General technical requirements and test methods
GOST R 54774-2011: Underground monorail diesel powered transport. General technical requirements and test methods
GOST R 54775-2011: Powered support pumping stations. General technical requirements. Test methods
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 54912-2012: Modified wood for bear of slide. Specifications
GOST R 54927-2012: Polymer composite sheet for special purpose. General technical requirements
GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications
GOST R 55152-2012: Mining equipment. Mobile armoured face conveyors. General technical requirements and test methods
GOST R 55156-2012: Mining equipment. Mine belt stage loader. General technical requirements and test methods
GOST R 55158-2012: Mining equipment. Haulage and shunting mining winches. General technical requirements and test methods
GOST R 55159-2012: The mountain-mine equipment. Underground loading machines. General technical requirements and test methods
GOST R 55160-2012: Mining equipment. Mine face conveyers jacks. General technical requirements and test methods
GOST R 55184-2012: Hydraulic clampers for railway rolling stock. General specifications
GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications
GOST R 55473-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 1. Polyethylene gas pipelines
GOST R 55554-2013: Electrode Holders the underwater welding also are sharp. General specifications
GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements
GOST R 55606-2013: High-voltage plug couplers (electrical connectors) for quarry electrical equipment and power grids. General specifications
GOST R 55649-2013: Section insulation for catenary of railways. Specifications
GOST R 55727-2013: Mining equipment. Mine loading cars. General technical requirements and test methods
GOST R 55730-2013: Mining equipment. Loading-transport machines. General technical requirements
GOST R 55736-2013: Mining equipment. Machines for drilling blast holes in open mountain developments. General technical requirements and test methods
GOST R 55737-2013: Mining equipment. Mine electric locomotive transport. Accumulator electric locomotives. General technical requirements and test methods
GOST R 55760-2013: Generating sets driven by internal combustion engines. Rules of marking, packing, transportation and storage
GOST R 55852-2013: Draft machine. General operating specification
GOST R 55853-2013: Medium speed roller mill. Types, critical parameters, specification
GOST R 56028-2014: Fire engineering. Automatic gas-powder fire extinguishing systems. General technical requirements. Test methods
GOST R 56071-2014: Products and billets of wood and wood materials for cultural and household use. Specifications
GOST R 56552-2015: Floating cranes. Specifications
GOST R 56629-2015: Electric Connectors for diving works. General specifications
GOST R 56674-2015: Casting of aluminium alloys and solid stamping of sheet aluminium cookware with non-stick coating. General specifications
GOST R 56674-2018: Casting cookware of aluminum alloys with non-stick coating. General specifications
GOST R 57112-2016: Gummed tape on paper substrate industrial-technical appointment. General specifications
GOST R 57214-2016: Glazing products for railway rolling stock. General specification
GOST R 57217-2016: Medical multi-place hyperbaric chambers with operating pressure 1, 0 MPa. General technical requirements
GOST R 57249-2016: Enzyme preparations. Packing, marking, transportation and storage
GOST R 57378-2016: Earthing rod for railway overhead contact system. Specifications
GOST R 57413-2017: Combustible natural gas. State reference materials on the basisd magistral gas. Specification
GOST R 57528-2017: Equipment for diving. Diving breathing apparatus with a half breath scheme. General technical requirements
GOST R 57529-2017: Saving means for crew of installations operated on water areas. Inflatable means for mass collection of floating people. General specifications
GOST R 57530-2017: Medical equipment for hyperbaric chambers under pressure. General technical requirements
GOST R 57613-2017: Graphite electrodes and nipples. Specifications
GOST R 57663-2017: Equipment for sports games. Gates for playing ice hockey. Requirements and test methods with regards to safety
GOST R 57736-2017: Mining equpment. Mine auxiliary fans. General specifications
GOST R 58199-2018: Mining equipment. Anchor bolt of composite materials. General specifications
GOST R 58201-2018: Mining drilling for pneumatic and hydraulic anchorage installers. General specifications
GOST R 58324-2018: Suspended ceilings. General technical conditions
GOST R 58365-2019: DC switches for voltages above 1000 V for traction substations and linear devices for traction power supply of the railway. General specifications
GOST R 58493-2019: Mining equipment. Drilling machines. General technical requirements and test methods
GOST R 58516-2019: Paint brushes and brushes. Technical conditions
GOST R 58517-2019: Paint rollers. Technical conditions
GOST R 58618-2019: The main pipeline transport of oil and oil products. Tank equipment. Breathing and safety valves. General specifications
GOST R 58619-2019: The main pipeline transport of oil and oil products. Tank equipment. Pontoons. General specifications
GOST R 58620-2019: The main pipeline transport of oil and oil products. Tank equipment. Acceptance devices for tanks. General specifications
GOST R 58640-2019: Axial fans for general use. General specifications
GOST R 58641-2019: General-purpose radial fans. General specifications
GOST R 58729-2019: Protections of ice hockey rinks. Technical specifications
GOST R 58792-2019: Fire fighting equipment. Mobile compression foam generation systems. General technical requirements. Test methods
GOST R 58850-2020: Bulk carbon nanostructured material. Specifications
GOST R 58894-2020: Condensed silica fume for concrete and mortars. Specifications
GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications
GOST R 59687-2022: Metal panels with foam insulation. General technical specifications
GOST R 59689-2022: Three-layer chrysotile cement panels with foam insulation. General technical conditions
GOST R 70235-2022: Cold-rolled strip of thermo-metals. Technical conditions
GOST R 70236-2022: Pipeline valves. Shut-off valves of thermoplastic materials. General specifications
GOST R 70359-2022: Hoisting cranes. Dead-end rail supports. Technical requirements
NPB 151-96: Complete set of fire crane. General technical requirements. Test Methods
NPB 155-96: Fire engineering. Portable fire extinguishers. General reguirements and Test Methods
NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods
NPB 159-97*: Fire fighting equipment. Fire monitors combined. General technical requirements. Test methods
NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods
NPB 54-96: Automatic Gaseous Agent Fire Extinguishing Systems. Modular Components and Cylinders. General Technical Requirements. Test Methods
NPB 63-97: Automatic foam fire extinguishing installations feeders. general technical requirements. test methods
NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods
ONTP 02-86: National Engineering Design Standards for Machine-Building, Instrument-Building, and Metalworking Facilities. Woodworking Shops
ONTP 02-94: Sectoral norms of technological design of enterprises in the automotive industry. Woodworking shops (sites)
OST 1-00555-72: Lock for folding doors. Technical specifications
OST 13-39-80: Products of cultural and community purpose, for kitchen and household use of wood and wood materials. General specification
OST 24.090.39-78: Shell stacker cranes. Specifications.
OST 24.090.51-86: Clamps for steel ropes. Technical conditions.
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26.260.454-99: Spiral wound gasket. Types and dimensions. General specifications.
OST 26-01-1183-82: Aluminium vessels and devices. General technical specifications.
OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.
OST 26-01-49-82: Assembling units and pipeline details for working pressure of 32 MPa (320 kgf/cm2). General specifications.
OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.
OST 26-04-280-93: Pipeline fittings of cryogenic equipment products. General specifications.
OST 26-07-2019-81: Bellows from alloy VТ1-0. Specifications.
OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.
OST 302-07-1152-92: Cylindrical helical compression springs. General specifications.
OST 35-22-83: Pipe culverts made of corrugated metal intended for railroad and auto road. Specifications.
OST 36-13-90: Shields and consoles of automation systems for technological processes. General technical conditions
OST 36-141-87: free metal Flange for plastic pipes for Pnom. to 1.0 MPa. Specifications.
OST 3-6307-87: Optical polycrystalline material П04. Specifications.
OST 37.002.0444-77: Assembly units and fastening parts of overhead conveyors to the supporting metal structures. Construction and dimensions
OST 45.179-2001: Fixed electrical installations of unattended regeneration points of fiber-optic transmission lines. General technical requirements
OST 45.85-96: Wooden and metal shelf stands for electric power storages applied by telecommunication enterprises. General requirements.
OST 48-184-81: Solder alloys for soldering of hard-alloy metal-cutting tool. Specifications.
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PNST 100-2016: Equipment for sports games. Ice hockey goals from composite materials. Technical requirements and test methods
PNST 101-2016: Table tennis. Tabletops from composite materials. Technical requirements and test methods
PNST 102-2016: Equipment for sports games. Football goals from composite materials. Technical requirements and test methods
PNST 103-2016: Rehabilitation ramps. Slatted flooring from composite materials. Technical requirements and test methods
PNST 104-2016: Rehabilitation ramps. Bearing stationary devices from composite materials. Technical requirements and test methods
PNST 228-2017: Aviation equipment. Hydraulic systems. Straight, cross, triple, transitional and transitional connectors, under axial pressing for a pressure of 35 MPa. Specifications
PNST 296-2018: Mining. Points of switching in self-rescuers. General technical requirements
PNST 64-2015: Material bulk nanostructured carbon. Specifications
PNST 96-2016: Ice hockey boards from composite materials. Technical requirements and test methods
PNST 97-2016: Equipment for sports games. Training wall for tennis from composite materials. Technical requirements and test methods
PNST 98-2016: Equipment for sports games. Volleyball pillar from composite materials. Technical requirements and test methods
PNST 99-2016: Equipment for sports games. Gates for mini-soccer and handball from composite materials. Technical requirements and test methods
RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 22-207-88: Lifting machines. General requirements and production standards
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.
RD 31.27.05-99: Instructions for acceptance, storage, release on vessels and quality control of fuels and lubricants in tank farms and warehouses.
RD 31.55.01.01-90: Spare parts for marine diesel engines of foreign construction. Steel piston heads. Technical requirements
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul
RD 36-62-00: Hoisting equipment. General technical requirements.
RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI
RST RSFSR 195-82: Writing pins. Technical conditions
RST RSFSR 38-87: Paper wire clips. Technical conditions
RST RSFSR 516-88: Eaves metal. Technical conditions
RST RSFSR 643-80: Black steel economic dishes . General specifications
RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions
RST RSFSR 736-86: Crutches and Canes. Technical Specifications
RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet
SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines
ST RK GOST R 50962-2008: Dishware and household products of plastic. General specification
ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions
ST TsKBA 017-2005: Pipe fittings. General technical conditions
ST TsKBA 083-2010: Pipe fittings. Multi-layer bellows of alloy VT1-0. General technical conditions
ST TsKBA 083-2016: Pipeline fittings. Multi-layered bellows made of alloy ВТ1-0. General technical specifications
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
STB 1357-2002: Industrial sewing machines. General specifications
STB 813-93: Scissors. General specifications
STB 841-2003: Ceramic products. General specifications
TU 002-00.ISRM 305607.004: Guard protective face NBT-01 VI
TU 0991-123-53832025-2001: Steel fiber for dispersed concrete reinforcement
TU 102-237-85: Mobile buildings (inventory) of the block of the "Watch" system. Group specifications
TU 102-264-81: Weighted reinforced concrete modular ring. UTK type for main pipelines
TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications
TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type
TU 102-391-84: Bath-sauna panel on solid fuel
TU 102-416-86: Garage reinforced concrete prefabricated for individual use
TU 102-425-86: A set of structures for the building of crane (crane) with structures frame production span of 12 and 18M
TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use
TU 102-533-89: A set of structures on a building without a crane with arched span of 12, 15 and 18 m
TU 102-541-89: Garage assembly individual use of ash and slag concrete
TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use
TU 14-4-507-99: Woven with square micron mesh
TU 1469-001-01297858-98: Rings support-guides for the transition of steel pipelines through roads and railways, laid in a protective casing (case). Technical conditions
TU 1469-001-53597015-01: Rings for guides for the transition of steel pipelines through roads and railways, laid in a protective casing (case)
TU 16-525.609-85: Asynchronous motors AIS80 - AIS112, supplied for export. Technical conditions
TU 2-034-439-88: Prisms testing and marking with one prismatic recess and overlay type P1
TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist
TU 24-1.1787-78: Shoe brakes with electromagnet of type TKT and TKP. Technical conditions
TU 2531-002-53597015-01: Face seal (rubber cuff) to protect the annular space at the junctions of main pipelines under roads and railways
TU 2531-005-01297858-2000: Sealing cuffs for pipelines over roads and railways laid in a protective case (casing)
TU 2531-007-01297858-02: Rubber-sealing cuffs for pipelines over roads and railways, laid in a protective case (casing)
TU 26-01-355-80: Electrolyzers. Type of SPP with component equipment
TU 26-02-975-84: Tips to sleeves for loading and loading risers
TU 26-05-108-88: Acetylene mobile generators of continuous action with a capacity of up to 3 m3
TU 26-05-39-85: Ramp acetylene discharge with protective device PAP-15
TU 26-05-492-78: High pressure acetylene valves
TU 34 10.10055-97: Vertical cylindrical steel tanks. Technical conditions
TU 34-31-10005-79: The level gauge for electrically conductive environments SUES. Technical conditions
TU 34-38-20121-87: Oil inlets. General technical conditions for major repairs
TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs
TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs
TU 34-38-20365-94: Power valves. General technical conditions for major repairs
TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions
TU 36-1496-85: Cable prefabricated structures. Technical conditions
TU 36-2199-79: Lifting equipment. Overhaul
TU 36-2203-84: Racks of radio transmission lines and additional products to them. Technical conditions
TU 3645-001-05693446-98: Installation of SGN-1 supersonic gas-plasma spraying coatings
TU 3799-004-11013589-2004: Flange Isolation Joint (FIS). Technical conditions
TU 38 0051166-98: Rubber compounds for the rubber products of aircraft
TU 38 10321-75: Rubber compounds based on silicone rubbers
TU 38-303-04-05-90: Cold cure catalysts for organosilicon sealing materials. Technical specifications
TU 38-303-04-06-90: Sublayers for organosilicon sealing materials. Technical specifications
TU 4218-003-17416124-99: Connection box for electrical wiring. Technical conditions
TU 48-12-52-88: Graphitized electrodes with a diameter of 75-400 mm and nipples to them
TU 48-19-221-83: Rods from yttrated tungsten, brand SVI-1. Technical conditions
TU 48-19-27-88: Lanthanum tungsten in the form of rods
TU 4833-002-08558606-95: Metal shielding of the PML type
TU 6-00-5761783-322-89: Elastic plates "XB". Technical conditions
TU 6-02-575-75: Product 119-95 (formerly AM-2)
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English
|
Manual are welding. Welding joints. Main types, design elements and dimensions
Language: English
|
Vessels and apparatus. Norms and methods of strength calculation
Language: English
|
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English |
Welding steel wire. Specifications
Language: English
|
Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection
Language: English
|
Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
Language: English
|
Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
Language: English
|
Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)
Language: English
|
Steel and alloys. Methods for detection and determination of grain size
Language: English
|
Armour clothes. Classification and general technical requirements
Language: English |
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
|
Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications
Language: English
|
Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
Language: English
|
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
|
Steel and corrosion resistant alloys. Test methods for resistance to intergranular corrosion
Language: English
|
Armored clothing. Classification and general specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.