GOST 31166-2003
ГОСТ 31166-2003
|
|
Building and structure envelopes. Method for calorimetric determination of the heat transfer coefficient
Конструкции ограждающие зданий и сооружений. Метод калориметрического определения коэффициента теплопередачи
Status: Effective - Introduced for the first time
The standard applies to enclosing structures of residential, public, industrial and agricultural buildings and structures: exterior walls, roofs, attic floors, floors over driveways, cold underground and basements - and sets a method for determining their heat transfer coefficient in laboratory and in-situ conditions. Enclosing structures in the measurement zone may contain various inclusions that violate thermal uniformity across the field of the enclosure. The standard does not apply to translucent enclosing structures.
Стандарт распространяется на ограждающие конструкции жилых, общественных, производственных и сельскохозяйственных зданий и сооружений: наружные стены, покрытия, чердачные перекрытия, перекрытия над проездами, холодными подпольями и подвалами - и устанавливает метод определения их коэффициента теплопередачи в лабораторных и натурных условиях. Ограждающие конструкции в зоне измерения могут содержать различные включения, нарушающие термическую однородность по полю ограждения. Стандарт не распространяется на светопрозрачные ограждающие конструкции.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
6/2/2003
SKU: RUSS68180
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh39 Test methods. Packaging. Marking »
National Standards for OKSTU »
SANITARY EQUIPMENT (EXCEPT VENTILATION AND AIR CONDITIONING EQUIPMENT), LOCKING AND FIXING PRODUCTS »
Control methods (testing, analysis, measurements) »
The Document References:
GOST 112-78: Meteorological glass thermometers
GOST 16617-87: Household electric heating appliances
GOST 17083-87: Electric fan heaters for household use. General specifications
GOST 1790-77: Wire made of chrome, aluminum, copper and constantan alloys for thermo electrodes of thermo-electric converters
GOST 26254-84: Buildings and structures. Methods of determination of thermal resistance of enclosing structures
GOST 26629-85: Buildings and structures. Method of thermovision control of enclosing structures of thermal insulation quality
GOST 27570.0-87: Safety of household appliances and similar devices
GOST 6416-75: Meteorological thermographs with bimetallic sensing elements. Specifications
GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods
GOST 8711-78: Ammeters and voltmeters. General technical specifications
GOST 8711-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2. Special requirements for ammeters and voltmeters
GOST 9245-79: Measuring direct current potentiometers
GOST 9736-91: Electric apparatus of direct transformation for measuring non -electric values. General technical requirements and test methods
GOST R 51380-99: Energy conservation. Methods of assurance for energy efficiency indicators of energy consumed products to its normative values. General requirements
GOST R 51387-99: Energy conservation. Norm-method securing. Basic concept
SNiP 23-02-2003: Buildings Heat Insulation
The Document is Referenced By:
GOST 31168-2003: Houses. Method for determination of specific heat consumption for building heating
GOST 31168-2014: Houses. Method for determination of specific heat consumption for building heating
GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition
GOST 32494-2013: Buildings and constructions. The method of mathematic simulation for temperature and humidity of protecting constructions
GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements
GOST R 54850-2011: Roof windows and skylights. Method for determination of reduced of thermal resistance
GOST R 70723-2023: Window and door units. Calorimetric method for determining the heat transfer coefficient
MSN 24-01-2011: Thermal protection of buildings
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
Resolution 1062-PP: Energy efficiency of residential and public buildings. Standards for energy consumption and thermal protection
RMD 23-16-2019 St. Petersburg: Recommendations for energy efficiency of residential and public buildings
RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg
R-SSK 03-2016: Recommendations. Assessment of energy efficiency of buildings. Calculation and experimental control of standardized energy performance of buildings
SNiP 23-02-2003: Buildings Heat Insulation
SP 23-101-2004: Design of thermal protection of buildings
ST-NP SRO SSK-02-2013: Evaluation of the energy performance of buildings. Monitoring compliance with the requirements of thermal protection of external building envelopes
STO SSK 02-2016: Assessment of the energy efficiency of buildings during construction. Monitoring compliance with the requirements of thermal protection of external building envelopes and specific annual consumption of thermal energy
TSN 23-349-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Samara Region
TSN 23-350-2004: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Vologodskaya Oblast
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
