GOST 31298.2-2005
ГОСТ 31298.2-2005
|
|
Noise of machines. Determination of sound insulation performances of enclosures. Part 2. Measurements in situ for acceptance and verification of declared noise performance values
Шум машин. Определение звукоизоляции кожухов. Часть 2. Измерения на месте установки для приемки и подтверждения заявленных значений шумовых характеристик
Status: Effective
The standard establishes methods for determining the soundproofing of machine covers on site. The standard is not intended to be used in order to determine the sound insulation of individual panels forming the casing.
Стандарт устанавливает методы определения звукоизоляции кожухов машин на месте установки. Стандарт не предназначен для применения в целях определения звукоизоляции отдельных панелей, образующих кожух.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/7/2006
SKU: RUSS68182
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
5 Protection against mechanical vibrations »
5.2 Acoustic noise »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.1 Components and assembly units for general engineering applications »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.01 Acoustic measurements and noise control in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.01 Acoustic measurements and noise control in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T3 Physics and Mechanics »
T34 Oscillatory and wave-like movements. Bodies vibration. Sound. Acoustics »
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation
GOST 1.5-2001: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. General requirements for structure, drafting, presentation, content and indication
GOST 17168-82: Octave and one-third-of-octave electronic filters
GOST 17187-81: Noise meters
GOST 23426-79: Noise. Methods of measurement of sound insulation by operators shelters or remote control cabins in industrial buildings
GOST 23628-79: Noise. Methods of measurement of sound insulation by acoustic hoods
GOST 27243-2005: Noise of machines. Determination of sound power levels using sound pressure. Comparison method in situ
GOST 30457-97: Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points. Engineering method
GOST 30683-2000: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections
GOST 30691-2001: Noise of machines. Declaration and verification of noise emission values
GOST 31169-2003: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ
GOST 31172-2003: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Engineering method in an essentially free field over a reflecting plane
GOST 31252-2004: Noise of machines. Guidelines for the selection of method for the determination of sound power levels
GOST 31274-2004: Noise of machines. Determination of sound power levels using sound pressure. Precision methods for reverberation rooms
GOST 31275-2002: Noise of machinery. Determination of sound power levels of noise sources using sound pressure method. Engineering method in an essentially free sound field over a reflecting plane
GOST 31276-2002: Noise of machinery. Determination of sound power levels of noise sources using sound pressure method. Engineering methods for small portable noise sources in reverberant fields in rooms with hard walls and special reverberation chambers
GOST 31277-2002: Machine noise Determination sound power from noise sources according to sound pressure. Approximate method with the use of measuring surface over the sound reflecting plane.
GOST 31298.1-2005: Noise of machines. Determination of sound insulation performances of enclosures. Part 1. Measurements under laboratory conditions for declaration of noise performans values
GOST R 51400-99: Noise of machines. Determination of sound power levels using sound pressure. Engineering methods for small, movable sources in reverberant fields for hard - walls test rooms and for special reverberation test rooms
GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
The Document is Referenced By:
GOST 31298.1-2005: Noise of machines. Determination of sound insulation performances of enclosures. Part 1. Measurements under laboratory conditions for declaration of noise performans values
GOST 31326-2006: Noise. Guidelines for noise control by enclosures and cabins
GOST 31337-2006: Noise of machines. Hand-held non-electric power tools. Engineering method for the measurement of noise
GOST R 52797.1-2007: Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 1. Noise control strategies
GOST R 52797.2-2007: Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 2. Noise control measures
SP 254.1325800.2016: Buildings and territories. Rules for designing of industrial sound protection
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
