GOST 31416-2009
ГОСТ 31416-2009
|
|
Chrysotile cement pipes and couplings. Specifications
Трубы и муфты хризотилцементные. Технические условия
Status: Effective
This standard establishes general requirements for non-pressure and pressure chrysotile cement pipes and couplings for them. Non-pressure pipes and couplings are designed for external pipelines of non-pressure sewage, drainage collectors of drainage systems, ventilation ducts (in exhaust ventilation systems), installation of telephone cables, associated drainage in heat networks, trunks of garbage ducts and other purposes. It is allowed to use thin-walled non-pressure pipes and couplings for laying telephone cables, as well as for constructing external pipelines of non-pressure sewage, drainage collectors of land-improvement systems and other purposes. Chrysotile cement pressure pipes and couplings are designed for pressure water and reclamation systems; heating mains of heating and hot water supply of cities, towns and agricultural complexes at a temperature of heat carrier (water) not more than 115 degrees. With and working pressure up to 1.6 MPa, ventilation systems (in exhaust ventilation systems), associated drainage in heat networks, trunks of garbage disposal and other purposes
Настоящий стандарт устанавливает общие требования на безнапорные и напорные хризотилцементные трубы и муфты к ним. Безнапорные трубы и муфты предназначены для наружных трубопроводов безнапорной канализации, дренажных коллекторов мелиоративных систем, вентиляционных воздуховодов (в системах вытяжной вентиляции), прокладки кабелей телефонной связи, попутного дренажа в тепловых сетях, стволов мусоропроводов и других целей. Допускается применять тонкостенные безнапорные трубы и муфты для прокладки кабелей телефонной связи, а также для устройства наружных трубопроводов безнапорной канализации, дренажных коллекторов мелиоративных систем и других целей. Хризотилцементные напорные трубы и муфты предназначены для напорных водопроводных и мелиоративных систем; теплотрасс отопления и горячего водоснабжения городов, поселков и сельскохозяйственных комплексов при температуре теплоносителя (воды) не более 115 град. С и рабочем давлении до 1,6 МПа, вентиляционных систем (в системах вытяжной вентиляции), попутного дренажа в тепловых сетях, стволов мусоропроводов и других целей
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
6/17/2010
SKU: RUSS68185
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
к.40 Water supply and sewerage »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.14 Fire equipment, machinery and equipment for public utilities »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.60 Water supply systems »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.60 Water supply systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh2 Sanitary, engineering and fire fighting equipment for buildings »
Zh21 Water supply and sewerage »
As a Replacement Of:
GOST 1839-80: Asbestos cement pipes and couplings for non-pressure pipe lines. Specifications
GOST 539-80: Asbestos cement pressure pipes and couplings. Specifications
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 11310-90: Asbestos cement pipes and couplings. Methods of test
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 17375-2001: Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design
GOST 17376-2001: Carbon and low-alloy steel butt-welding fittings. Tees. Design
GOST 17378-2001: Carbon and low-alloy steel butt-welding fittings. Reducers. Design
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 17584-72: Cast iron joining rings and fittings for asbestos cement pressure pipes
GOST 1839-80: Asbestos cement pipes and couplings for non-pressure pipe lines. Specifications
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30301-95: Asbestos-cement products. Acceptance rules
GOST 5228-89: Rubber o-rings for the couplings of asbestos-cement pipes
GOST 539-80: Asbestos cement pressure pipes and couplings. Specifications
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
The Document is Referenced By:
GOST 11310-2012: Chrysotiles cement pipes and couplings. Acceptance rules and test methods
GOST 32948-2014: Automobile roads of general use. Supports of road signs. Technical requirements
GOST 33888-2016: Telecommunications railway. Cable lines laying within the railway right of way. Requirements and methods of control
ODM 218.2.055-2015: Recommendations for the calculation of drainage systems for road structures
ODM 218.3.046-2015: Recommendations about technology of repair of water throughput pipes with use of composite materials
SP 100.13330.2016: The reclamation systems and construction
SP 120.13330.2012: Subway systems
SP 121.13330.2012: Aerodromes
SP 122.13330.2012: Railway and highway tunnels
SP 122.13330.2023: Railroad and road tunnels
SP 158.13330.2014: Buildings and rooms for health care facilities. Design rules
SP 18.13330.2011: Master plans for industrial enterprises
SP 244.1326000.2015: Cable line of railway transport infrastructure
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 31.13330.2021: Water supply. External networks and structures SNiP 2.04.02-84*
SP 315.1325800.2017: Thermal networks laid in a ground. Design rules
SP 74.13330.2023: Heat networks.
SP 97.13330.2016: Asbestos-cement constructions
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
