GOST 33-2000
ГОСТ 33-2000
|
|
Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
Нефтепродукты. Прозрачные и непрозрачные жидкости. Определение кинематической вязкости и расчет динамической вязкости
Status: Not effective - Superseded. Registration information 336-st dated 04/27/2017 (Rosstandart official website); IUS 9-2017
The standard establishes a method for determining the kinematic viscosity v of liquid petroleum products, transparent and opaque liquids by measuring the flow time of a certain volume of liquid under the influence of gravity through a calibrated glass capillary viscometer. The standard does not apply to bitumens.
Стандарт устанавливает метод определения кинематической вязкости v жидких нефтепродуктов, прозрачных и непрозрачных жидкостей измерением времени истечения определенного объема жидкости под воздействием силы тяжести через калиброванный стеклянный капиллярный вискозиметр. Стандарт не распространяется на битумы.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Russian Federation for Standardization and Metrology,
3/27/2001
SKU: RUSS68201
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
013/2011 TR CU. About requirements to automobile and aviation gasoline, diesel and marine fuel, jet fuel and fuel oil »
Regulations and standards (to ТР ТС ТС 013/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
030/2012 TR CU. On requirements for lubricants, oils and special fluids »
Regulations and standards (to 030/2012 TR CU) »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
B Oil products »
B1 Liquid and gaseous fuel »
B19 Test methods. Packaging. Marking »
National Standards for OKSTU »
OIL, PETROLEUM PRODUCTS, GAS »
Control methods (testing, analysis, measurements) »
The Document is Replaced With:
GOST 33-2016: Petroleum and petroleum products. Transparent and opaque liquids. Determination of kinematic and dynamic viscosity
As a Replacement Of:
GOST 33-82: Petroleum products. Method for determination of kinematic viscosity and calculation of dynamic viscosity
The Document References:
GOST 10028-81: Glass capillary viscosimeters. Specifications
GOST 112-78: Meteorological glass thermometers
GOST 12026-76: Filter paper for laboratory application
GOST 13646-68: Glass mercury thermometers designed for precise measurements
GOST 14710-78: Petroleum toluene
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 22867-77: Reagents. Ammonium nitrate. Specifications
GOST 2517-85: Crude oil and petroleum products. Methods of sampling
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 2603-79: Reagents. Acetone. Specifications
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 3134-78: White spirit
GOST 33-82: Petroleum products. Method for determination of kinematic viscosity and calculation of dynamic viscosity
GOST 3900-85: Petroleum and petroleum products. Method for determination of density
GOST 400-80: Glass thermometers for testing of petroleum products. Specifications
GOST 4095-75: Isooctane for industrial use. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4220-75: Reagents. Potassium bichromate. Specifications
GOST 5789-78: Reagents. Toluene. Specifications
GOST 6824-96: Distilled glycerin
GOST 8505-80: Nefras-C 50/170. Specifications
The Document is Referenced By:
GOST 10028-81: Glass capillary viscosimeters. Specifications
GOST 10121-76: Selectively purified transformer oil
GOST 10227-2013: Jet fuels. Specifications
GOST 10227-86: Jet fuels
GOST 10289-79: Oil for marine gas turbines
GOST 10363-78: Oil ЭШ for hydraulic systems of high-load mechanisms. Specifications
GOST 10534-78: Sulphonated additive CБ-3. Specifications
GOST 10541-78: Automobile motor oils for carburetor engines
GOST 10585-2013: Petroleum fuel. Mazut. Specifications
GOST 10585-99: Oil fuel. Mazut. Specifications
GOST 10877-76: Preservative oil K-17
GOST 11063-77: Motor oils containing additives. Method for determination of stabilization by inductive period of sedimentation
GOST 11122-84: Hinge oil BНИИ НП-25. Specifications
GOST 11244-76: Petroleum. Method for the determination of distillation and residue oils potential content
GOST 12261-87: Afk additive
GOST 12308-2013: Thermostable fuels T-6 and T-8B for jet engines. Specifications
GOST 12308-89: Thermo stable t-6 and t-8b fuels
GOST 12337-84: Motor oils for diesel engines
GOST 12672-77: Oil for rolling mills ПС-28. Technical specifications
GOST 12869-77: Electrical insulating synthetic fluid octol. Specifications
GOST 13076-86: Synthetic oil BНИИ НП 50-1-4ф. Specifications
GOST 13374-86: Instrument oil ВНИИ НП-1-ЧМО. Specifications
GOST 15819-85: Oils РМ and РМЦ. Specifications
GOST 1667-68: Motor fuel for medium- and low-speed diesel engines
GOST 16728-78: Oil ВНИИ НП-403. Specifications
GOST 17108-86: Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement
GOST 17479.1-2015: Motor oils. Classification and designation
GOST 17479.2-2015: Transmission oils. Classification and designation
GOST 17479.2-85: Identification number of petroleum products
GOST 17601-90: Marine centrifugal separators. Acceptance and methods of tests
GOST 1805-76: Apparatus oil МВП. Specifications
GOST 18136-72: Oils. Method for determination of oxidation stability in a universal apparatus
GOST 18464-96: Hydraulic fluid power. Hydraulic cylinders. Acceptance rules and test methods
GOST 1861-73: Compressor oils
GOST 20302-74: Motor oils. Method of corrosion test for oils on engine 'Yas-204'
GOST 20303-74: Motor oils. Method of estimation of detergent characteristics of oils by installation ИМ-1
GOST 20457-75: Motor oils. Method of test for antioxidzing properties by installation ИКМ
GOST 20799-88: Industrial oils Specifications
GOST 20944-75: Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
GOST 20994-75: Motor oils. Method of testing their tendency to form deposits at low temperatures
GOST 21046-2015: Used petroleum products. General specification
GOST 21046-86: Waste petroleum products
GOST 21490-76: Motor oils. Method of test detergent properties by the installation 'УИM-6-НАТИ'
GOST 21532-76: Horological lubricant PS-1. Specifications
GOST 21743-76: Aviation oils
GOST 21748-76: Oil MЗ-52. Specifications
GOST 21791-76: Мac-30nk synthetic oil
GOST 23008-78: Shock absorber liquid AЖ-12т. Specifications
GOST 23497-79: Motor oils M-14B23 and M-20B2. Specifications
GOST 23652-79: Transmission oils
GOST 23797-79: Oil for aircraft gas turbine engines. Method for the determination of thermo oxidizing stability in oil volume
GOST 25371-97: Petroleum products. Calculation of viscosity index from kinematic viscosity
GOST 25770-83: High-speed diesel engine motor oils for transport vehicles
GOST 28508-90: Vegetable tanning extracts. Methods of determination
GOST 29174-91: Petroleum products and lubricants. Petroleum lubricating oils for turbines (categories ISO-L-TSA and ISO-L-TGA). Specifications
GOST 305-2013: Diesel fuel. Specifications
GOST 305-82: Diesel fuel. Specifications
GOST 30687-2000: Earth-moving machinery. Engine test code. Net power
GOST 30745-2001: Agricultural tractors. Measurement of propulsion performance characteristics
GOST 30747-2001: Agricultural tractors. Measurement of characteristics tested through the power take-off shaft
GOST 30749-2001: Agricultural tractors. Measurement of the driving axles power
GOST 30852.7-2002: Explosionproof electrical apparatus. Part 6. Oil-filled enclosures o
GOST 31391-2009: Oil products. Transparent and opaque liquids. Method for the determination of kinematic viscosity and calculation of dynamic viscosity
GOST 31610.6-2015: Explosion hazardous media. Part 6. Equipment with type of explosion protection "filling the shell with liquid" o "
GOST 3164-78: Medical petrolatum. Specifications
GOST 32500-2013: Petroleum products. Calculating viscosity index from kinematic viscosity at 40 and 100 °C
GOST 32510-2013: Marine fuels. Specifications
GOST 32511-2013: Diesel fuel EURO. Specifications
GOST 32595-2013: Aviation turbine fuel Jet A-1. Specifications
GOST 32-74: Turbine oils
GOST 33341-2015: All-season antifreeze compositions and liquid coolants for heat-exchange systems. Specifications
GOST 33686-2015: Machines for transportation and application of liquid fertilizer. Methods of tests
GOST 33696-2015: Drilling agents. Field tests
GOST 4.23-83: Quality ratings system. Plastic greases. Quality characteristics nomenclature
GOST 4225-76: Perfume oil. Specifications
GOST 4806-79: Shale oil fuel. Specifications
GOST 5546-86: Oils for refrigerating machines
GOST 5774-76: Condenser vaselin. Technical requirements
GOST 5775-85: Capacitor oil
GOST 610-72: Oils for axle journals. Specifications
GOST 6258-85: Petroleum products method for determination of assumed viscosity
GOST 6360-83: MT-16P and M-16PC oils.
GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures
GOST 6411-76: Heavy cylinder oils
GOST 6457-66: Oils МК-8. Specifications
GOST 6581-75: Liquid electrical insulating materials. Electric test methods
GOST 6794-75: Oil АМГ-10. Specifications
GOST 6948-81: Foaming agent PО-1Specifications
GOST 7163-84: Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
GOST 7611-75: Oil for ventilating filters. Specifications
GOST 7934.3-74: Watch oils. Method for the determination of growing viscosity by oxidation in subtle layer
GOST 7935-74: General-purpose homological oils. Specifications
GOST 7936-76: Thickened clock oil PS-4
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8463-76: Oil С-220. Specifications
GOST 8581-78: Motor oil for automobile and tractor
GOST 8781-71: Low-temperature clock oils. Specifications
GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state
GOST 9243-75: KS-19 compressor oil
GOST 982-80: Transformer oils
GOST 9972-74: Petroleum turbine oils with additives
GOST ISO 14396-2015: Internal combustion engines. Definition and method of measuring engine power. Additional requirements for measuring emissions of combustion products according to ISO 8178
GOST ISO 15380-2014: Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specification for categories HETG, HEPG, HEES and HEPR
GOST ISO 4263-4-2013: Petroleum and petroleum products. Determination of the ageing behaviour of inhibited oils and fluids. TOST method. Part 4. Industrial gear oils
GOST R 22.9.25-2014: Safety in emergency. Hydraulic emergency and rescue tools. Test methods
GOST R 41.49-2003: Uniform provisions concerning the certification of compression ignition and natural gas engines as well as positive-ignition engines fuelled with liquefied petroleum gas and vehicles equipped with compression ignition and natural gas engines and positive-ignition engines fuelled with liquefied petroleum gas, with regard to the emissions of pollutants
GOST R 50588-2012: Foaming agents for fire extinguishing. General technical requirements and test methods
GOST R 50588-93: Foaming agents for fire extinguishing. General technical requirements and test methods
GOST R 50986-96: Hydraulically operated portable emergency and rescue tools. Jaw cutters. Basic parameters and dimensions. Methods of testing
GOST R 51330.7-99: Explosion-proof electrical apparatus. Part 6. Oil-filled "o" enclosures
GOST R 51544-2000: Hydraulically operated portable emergency and rescue tools. Spools with hydraulic lines. Basic parameters and dimensions. Methods of testing and control
GOST R 51546-2000: Hydraulically operated portable emergency and rescue tools. Spreader. Basic parameters and dimensions. Methods of testing and control
GOST R 51634-2000: Motor oils for autotractors. General technical requirements
GOST R 51907-2002: Motor oil for marine diesels М-20Г2СД. Specifications
GOST R 52050-2006: Aviation turbine fuel Jet A-1. Specifications
GOST R 52250-2004: Electronic engineering materials. Resists for lithography processes. General specifications
GOST R 52338-2005: Industrial cleanliness. Methods for lubricating and cooling liquids testing
GOST R 52350.6-2006: Electrical apparatus for explosive gas atmospheres. Part 6. Oil-immersion 'o'
GOST R 52368-2005: Diesel fuel EVRO. Specifications
GOST R 52755-2007: Liquid composite fuel. Specifications
GOST R 53559-2009: Vehicles. Forced ignitions engine fuel filters and filter elements. General technical requirements
GOST R 53844-2010: Vehicles. Fine filters of oil for automobile, tractor and combine engines. Technical requirements and test methods
GOST R 54299-2010: Marine fuels. Specifications
GOST R 54331-2011: Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear. Specifications
GOST R 55475-2013: Dewaxed winter and arctic diesel fuel. Specifications
GOST R 55775-2013: Aviation oil МС-8П. Specifications
GOST R 56147-2014: Jet fuels. Procedure for qualification tests and drawing up of a technical statement
GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes
GOST R 8.774-2011: State system for ensuring the uniformity of measurements. Disperse composition of liquid media. Determination of particle size by dynamic light scattering
GOST R 8.903-2015: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. Procedures of measurements
GOST R ISO 1817-2009: Rubber. Determination of resistance to liquids effect
GOST R ISO 3968-2011: Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow characteristics
GOST R ISO 8178-5-2009: Reciprocating internal combustion engines. Exhaust emission measurement - Part 5. Test fuels
Manual: Manual for impulse and low consumption fire extinguishing systems
MI 1974-2004: State system for ensuring uniformity of measurements. Turbine flow transducers. Method of verification
MI 2418-97: State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products
MI 2693-2001: Crude Oil Metering Oil Production Facilities
MI 2735-2002: Recommendation. GSE. A lot of oil. Methods for measuring the system of measuring the quantity and quality of oil UUN NSP "Sergeevka" NGDU "Ufaneft"
MI 2837-2003: Oil hand-over and acceptance points metrological and technical support
MI 2956-2005: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic transducers of oil consumption with a nominal diameter of 400 mm and more. Method of verification
MI 2972-2006: State system of measuring uniformity provision. Petroleum mass. Method of measuring by the system of petroleum quantity and properties measuring system No.1005 JSC ´Shugurovskiy petrochemical plant´
MI 2974-2006: State system of measuring uniformity provision. Class 2 piston-pipe calibration rigs. Verification method for class 1 piston-pipe calibration rig with comparator
MI 3081-2007: Systems of measurement of quantity and quality of oil, light petroleum products and liquid hydrocarbons. Maintenance and repair. Basics
MI 3200-2009: Recommendation. GSE. Mass of crude oil. Methods of measuring the system of measuring the amount and parameters of crude oil at the temporary loading point of the Bayandy field at the Chamber of Commerce and Industry Usinskneftegaz OOO Lukoil-Komi
MI 3265-2010: State system for ensuring uniformity of measurements. Ultrasonic flow transducers. On-site verification method
MI 3266-2010: State system for ensuring uniformity of measurements. Converters volumetric flow reference. Method of verification
MI 3267-2010: State system for ensuring uniformity of measurements. Volume flow transducers. Method of calibration using a standard volume flow converter
MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support
MI 3380-2012: State system for ensuring uniformity of measurements. Volume flow transducers. Methods of verification on-site calibration equipment
ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei
OST 153-39.2-048-2003: Oil. Crude oil. Routine research of reservoir fluids and separated oil. Scope of research and presentation of results.
R 50.2.040-2004: Metrological assurance of oil accounting when transferring via main pipeline system. Basic provisions
RD 153-34.1-43.106-2001: Model Guidelines for Acceptance, Storage, and Use of Fireresistant Turbine Oils Type OMTI
RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 31.2.07-2001: Fuels, oils, lubricants and special liquids for ships of sea transport. Nomenclature and scope
RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 34.43.301: Guidelines for Collection, Storage, and Rational Use of Used Oils in Construction Organizations Administered by Minenergo USSR
RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements
ST RK 1210-2003: Bitumens and bituminous binders. Method for determination kinematic viscosity
ST RK 1647-2007: Railway transport. Magnetic particles method of non-destructive control of car parts
ST RK 2467-2014: Oil for hydrostatic transmissions MGE-46V. Specifications.
ST RK 2468-2014: Hydraulic oil AUP. Specifications.
ST RK 2470-2014: All-seasons hydraulic oil (VMGZ) Specifications.
ST RK 2823-2016: Industrial explosives Poremit-1. Technical conditions
ST RK GOST R 51634-2008: Motor oils for autotractors. General technical requirements. Put into effect in substitution of
TU 0253-053-00151911-2008: Industrial oils
TU 38.1011299-2006: IPM 10 aviation oil
TU 38.101821-2001: Turbine oil TP-22C. Technical conditions
TU 38.101821-2013: Turbine oil Тп-22С brand 1. Specifications
TU 38.10195-86: Oil standard for rubber testing (SZHR)
TU 38-101821-83: Turbine oil TP-22C. Technical conditions
TU 38-101937-83: Oil softener for the rubber industry
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Vegetable oils. General technical requirements
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.