GOST 6433.2-71
ГОСТ 6433.2-71
|
|
Solid electrical insulating materials. Methods for evaluation of electrical resistance at d. c. voltages
Материалы электроизоляционные твердые. Методы определения электрического сопротивления при постоянном напряжении
Status: Effective. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1021 dated 06/26/91
The standard applies to solid electrical insulating materials, including films of high-molecular compounds with a thickness of 0.003 mm or more, and establishes methods for determining these materials at constant voltage.
Стандарт распространяется на твердые электроизоляционные материалы, включая пленки из высокомолекулярных соединений толщиной 0,003 мм и более, и устанавливает для этих материалов методы определения при постоянном напряжении.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
5/24/1971
SKU: RUSS68211
The Product is Contained in the Following Classifiers:
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.035 Insulation Materials »
29.035.01 Insulation materials in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.035 Insulation Materials »
29.035.01 Insulation materials in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E3 Electrical materials and insulators »
E39 Test methods. Packaging. Marking »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Electrical insulating materials and products, electrical coal and electrometal-ceramic »
The Document References:
GOST 20403-75: Rubber. Method for determination hardness in international units (30 to 100 IRHD)
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 6433.1-71: Solid electrical insulating materials. Environmental conditions at preparation of samples and testing
The Document is Referenced By:
GOST 10315-75: Solid electrical insulating materials. Methods for the determination of moisture resistance and water resistance
GOST 10354-82: Polyethylene film Specifications
GOST 10589-2016: Moulding polyamide 610. Specifications
GOST 10667-90: Sheet organic glass. Specifications
GOST 10751-85: Conducting cable paper
GOST 11368-89: Wood moulding compounds. Specifications
GOST 11529-2016: Polyvinylchloride materials for floors. Control methods
GOST 11529-86: PVC materials for floors. Methods of control
GOST 11945-78: Vulcanized fibre tubes. Specifications
GOST 12.4.091-80: Plastic miner's helmets
GOST 12.4.124-83: Occupational safety standards system. Means of static electricity protection. General technical requirements
GOST 12.4.272-2014: Occupational safety standards system. Individual protective respiratory devices. Apparatus with chemical oxygen or compressed oxygen. General technical requirements. Test methods. Marking. Sampling rules
GOST 12.4.292-2015: Occupational safety standards system. Personal respiratory protection. Isolating self-rescuers with chemically bound or compressed oxygen. Technical requirements. Test methods. Marking Sampling rules
GOST 12.4.299-2015: Occupational safety standards system. Personal respiratory protection. Recommendations for selection, application and maintenance
GOST 12271-76: The copolymers of styrene. Specifications
GOST 12294-66: Electrical insulating impregnation varnish ФЛ-98. Specifications
GOST 12998-85: Polystyrene film. Specifications
GOST 13.2.006-87: Reprography. Copirography. Paper for electroph otography. Specifications
GOST 13913-78: Laminated wood plastics. Specifications
GOST 14332-78: Suspension polyvinylchloride. Specifications
GOST 14613-83: Fibreboard. Specifications
GOST 14632-79: Multilayer and single-layer polyvinylchloride linoleum without backing. Technical requirements
GOST 14906-77: Fluoroplastic-4D. Specifications
GOST 15865-70: Insulating varnish MЛ-92. Specifications
GOST 16185-82: Plastics. Method for determining of electrostatic properties
GOST 16214-70: Tape polyvinylchloride electro insulation. Specification
GOST 16214-86: Tape polyvinylchloride electro insulation
GOST 16337-2022: High-pressure polyethylene. Technical specifications
GOST 16360-70: Asbestic textolite Electrotechnical sheet. Specification
GOST 16426-81: Electrotechnical marble crumb. Specifications
GOST 16475-81: Polyvinylchloride floor tiles. Specifications
GOST 16747-80: Condenser paper. Method for determining number of current-conducting insertions
GOST 17478-72: Moulding material Дcb. Specifications
GOST 17478-95: Moulding materials. Measuring glass-fibre-base laminate and granulated glass-fibre-base laminate. Specifications
GOST 17648-72: Glass filled polyamides
GOST 17648-83: Glass filled polyamides. Specifications
GOST 17675-80: Electro insulating flexible tubes. General specifications
GOST 17675-87: Flexible electrical insulating tubes
GOST 19034-82: Tubes of polyvinylchloride plastic. Specifications
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 19459-87: Injection moulding polyamide copolymers. Specifications
GOST 19478-74: Polyvinyl chloride plasticate for telephone cord insulation and shell. Specifications
GOST 20-2018: Rubber-fabric conveyer belts. Specifications
GOST 20419-75: Electrotechnical earthenware materials
GOST 20437-89: Moulding material AГ-4. Specifications
GOST 20-85: Rubber-fabric conveyor belts
GOST 22782.0-81: Explosion-proof electrical equipment
GOST 24234-80: Polyethylene terephtalate film (polyester film). Specifications
GOST 24409-80: Ceramic electrotechnical materials. Methods of testing
GOST 25209-82: Plastics and polymer films. Methods for the determination of surface charges of electrets
GOST 25288-82: Constructive plastic mosses. Quality characteristics nomenclature
GOST 25500-82: Laminated plastic sheets for electric purpose
GOST 25645.323-88: Polymeric materials. Methods of radiation tests
GOST 25645.331-91: Polymeric materials. Requirements for radiation resistance estimation
GOST 25812-83: Steel pipe mains. General requirements for corrosion protection
GOST 26103-84: Electrical insulating materials
GOST 26246.0-89: Foil-clad electrical insulating materials for manufacture of printed plates. Test methods
GOST 26764-85: Paper for punched tape. Specifications
GOST 26996-86: Polypropylene and copolymers of propylene. Specifications
GOST 27133-86: Reeled electrical insulating laminated materials
GOST 27426-87: Test methods for determining electrolytic corrosion with insulating materials
GOST 2748-77: Hard rubber plates, rods and tubes for electrotechnical purposes. Specifications
GOST 27905.2-88: Electrical insulation systems. Evaluation of performances evaluation, ageing mechanism, diagnostic procedures
GOST 28034-89: Electric insulating varnished fabrics
GOST 28250-89: High-impact polystyrene. Specifications
GOST 28804-90: Moulding phenol materials. General specifications
GOST 30066-96: Electro insulating film 'Lavaril-2N'. Specifications
GOST 30095-93: Polyester moulding materials (premixes). General specifications
GOST 30501-97: Solid electrical insulating materials. Method of measuring electrical resistance and resistivity at elevated temperatures
GOST 30535-97: Polymeric adhesives. Nomenclature of indices
GOST 30630.3.2-2013: Methods for determining the resistance of polymeric insulating materials and systems through the accelerated tests in aggressive gaseous media. General requirements. Testing materials and insulation systems for low-voltage electrical products
GOST 31613-2012: Static electricity spark safety. General technical requirements and test methods
GOST 32588-2013: Polymer composites. List of characteristics
GOST 34078-2017: Rail fasteners pads of railway. Specifications
GOST 34362.2-2017: Plastics Thermoplastic polyester based elastomers
GOST 34367.1-2017: Plastics Collection and presentation of comparable numerical data on the properties of molding materials
GOST 34376.2-2017: Plastics. Thermoplastic polyurethanes for moulding and extrusion. Part 2. Preparation of test specimens and determination of properties
GOST 34802-2021: Gas distribution systems. Coatings of extruded polyethylene for steel pipes. General technical requirements
GOST 4.402-85: System of product quality indexes. Glued plywood. List of characteristics
GOST 5385-74: Round laminated (fabric based) rods used for electrical purposes
GOST 5689-79: Phenolic moulding compound. Specifications
GOST 5960-72: Flexible PVC for insulation and protective jackets of wires and cables. Specifications
GOST 6134-2007: Rotodynamic pumps. Test methods
GOST 6244-70: Electrical insulating impregnating varnishes БТ-987, БТ-988. Specifications
GOST 6625-85: Mine local ventilating fans
GOST 8727-78: Flexible glass micanite. Specifications
GOST 9.053-75: Unified system of corrosion and ageing protection. Non-metallic materials and articles with their application. Method of microbiological resistance tests under natural and atmospheric conditions
GOST 9.406-84: Unified system of corrosion and ageing protection. Organic-silicate coatings. Technical requirements and methods of tests
GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes
GOST 9.703-79: Unified system of corrosion and ageing protection. Plastic materials for items, used in tropical conditions. General requirements for selection and test methods
GOST 9.711-85: Uniform system of protection against corrosion and ageing. Polymeric materials for the products, working in the conditions of radiation ageing. General requirements to selection.
GOST 9151-75: Enamels of types ГФ-92. Specifications
GOST 9359-80: Urea-formaldehyde and melamine-formaldehyde moulding materials (aminoplasts). Specifications
GOST R 12.4.220-2012: Occupational safety standards system. Respiratory protective devices. Self-contained closed-circuit breathing apparatus for escape. Technical requirements. Test methods. Marking. Sampling rules
GOST R 12.4.275-2012: Occupational safety standards system. Respiratory protective devices. Powered atmospheric air supply hose apparatus with helmet. Technical requirements. Test methods. Marking
GOST R 12.4.276-1-2012: Occupational safety standards system. Respiratory protective devices. Compressed air line supply breathing apparatus. Part 1. Apparatus with a full face mask. Technical requirements. Test methods. Marking
GOST R 12.4.276-2-2012: Occupational safety standards system. Respiratory protective devices. Compressed air line supply breathing apparatus. Part 2. Apparatus with half mask at positive pressure. Requirements. Test methods. Marking
GOST R 12.4.279-2012: Occupational safety standards. Respiratory protective devices. Recommendations for selection, use, and maintenance. Guidance document
GOST R 50344-92: Solid insulating materials. Methods of the determination of the insulation resistance
GOST R 50583-93: Polymer composites. List of properties
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 51180-98: Electrical insulating materials. Safety requirements and test methods
GOST R 51372-99: Accelerated life and storable life tests methods in special aggressive and other special medias for technical products, material and systems of materials. General
GOST R 52274-2004: Static electricity spark safety. General technical requirements and test methods
GOST R 53167-2008: Methods for determination of endurance of polymer electrical insulation materials and systems by means of acceleration tests in chemically active media. General requirements. Materials and insulation systems for low-voltage electrical products tests
GOST R 53734.2.3-2010: Electrostatics. Part 2.3. Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation
GOST R 53734.4.10-2014: Electrostatics. Part 4-10. Standard test methods for specific application. Two-point resistance measurement
GOST R 53734.4.5-2010: Electrostatics. Part 4-5. Standard test methods for specific applications. Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person
GOST R 54072-2010: Space technology. Polymer composites. List of properties
GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications
GOST R 55436-2013: Gas distribution systems. Coatings with extruded polyethylene on steel pipes. General technical requirements
GOST R 56291-2014: Rail fasteners pads of railway. Specifications
GOST R 56904-2016: Steel cord conveyor belts for mining industry. General specifications
GOST R 57032-2016: Conveyor belts with textile plies for coal mining. Specifications
GOST R 57432-2017: Packaging. Films of the biodegradable material. General specifications
GOST R 57736-2017: Mining equpment. Mine auxiliary fans. General specifications
GOST R 58344-2019: Earthing switches and grounding devices for various purposes. General technical requirements for anode grounding of electrochemical corrosion protection installations
GOST R 59387-2021: Installation cables for use in electrical installations in hazardous areas, including for underground workings. General specifications
GOST R 70258-2022: Sub-ballast mats for vibration isolation of track superstructure structures. Test methods
GOST R 70261-2022: Sub-tie gaskets for vibration isolation of track superstructure structures. Test methods
GOST R IEC 893-3-2-2002: Industrial rigid laminated sheets. Requirements for rigid laminated sheets based on epoxide resins. Specifications
Manual for SNiP 2.03.13-88: Recommendations for the design of floors (in the development of SNiP 2.03.13-88 "Floors")
MDS 31-12.2007: The floors of residential, public and industrial buildings using materials from the company "Henkel Bautechnik." Materials for design and working drawings of nodes
NB ZhT TsP 149-2003: Gaskets for rail fastening railway track. Safety standards
RB-136-17: Safety Guide for the Use of Atomic Energy
RB-138-17: Safety Guide for the Use of Atomic Energy
RD 31.52.08-81: Caprolon steering gear bearings. Technological requirements for the manufacture and installation of ship repair
RD 34.20.325: Procedural Guidelines for Bench Tests of Anticorrosion Coatings for Underground Heat Distribution Lines
SO 34.35.311-2004: Guidelines for Determining Electromagnetic Environment and Compatibility at Power Stations and Substations
TR 75-98: Guide to Good Practice for the Design and Installation of Underground Communications Ducts Made of Plastic Pipes
TU 32 CP 828-97: Rubber parts for railway leveling
TU 38 0051166-98: Rubber compounds for the rubber products of aircraft
TU 38 10321-75: Rubber compounds based on silicone rubbers
TU 38-103508-81: Silicone compounds. Type
TU 84-20-68: Organosilicate materials
TU 95 1613-01: Polyethylene heat shrink tubes. Technical conditions
VSN 008-88: Construction of trunk and field pipelines. Anticorrosion and heat insulation
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.