GOST 9.048-89
ГОСТ 9.048-89
|
|
Unified system of corrosion and ageing protection. Technical items. Methods of laboratory tests for mould resistance
Единая система защиты от коррозии и старения. Изделия технические. Методы лабораторных испытаний на стойкость к воздействию плесневых грибов
Status: Effective - Supersedes. IUS 10-1989 The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard applies to technical products of versions T, TV, TM, OM, O, In all categories of placement, except category 4.1 according to GOST 15150, and establishes four methods of laboratory tests for resistance to the action of mold fungi. Methods establish: 1 - the correctness of the choice of materials and possible technological defects in the manufacture of products. Optical parts are tested only by method 1; 2 - influence on the mushroom resistance of external contaminants in the process of assembly and (or) operation, and (or) storage of products; 3 - the effect of external pollution on the fungus resistance and performance of products; 4 - the effect of the intensive development of mold fungi on the performance of products. The methods are used for products to which the standards or specifications impose requirements for mushroom resistance.
Стандарт распространяется на технические изделия исполнений Т, ТВ, ТМ, ОМ, О, В всех категорий размещения, кроме категории 4.1 по ГОСТ 15150, и устанавливает четыре метода лабораторных испытаний на стойкость к воздействию плесневых грибов. Методы устанавливают: 1 - правильность выбора материалов и возможных технологических дефектов при изготовлении изделий. Оптические детали испытывают только методом 1; 2 - влияние на грибостойкость внешних загрязнений в процессе сборки и (или) эксплуатации, и (или) хранения изделий; 3 - влияние внешних загрязнений на грибостойкость и работоспособность изделий; 4 - влияние интенсивного развития плесневых грибов на работоспособность изделий. Методы применяют для изделий, к которым в стандартах или технических условиях предъявляют требования по грибостойкости.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
6/26/1989
SKU: RUSS68226
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
19 Tests »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.1 General requirements for tests on external factors »
ISO classifier »
19 TESTS »
19.040 Climatic tests »
National standards »
19 TESTS »
19.040 Climatic tests »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T9 Unified system of protection against corrosion and aging of materials and products »
T97 Means and methods of protection against biological factors »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Unified system of protection against corrosion and aging of materials and products (ESZKS) »
As a Replacement Of:
GOST 9.048-75: Unified corrosion and ageing protection system. Technical items. mould fungi resistance laboratory test method
The Document References:
GOST 1172-93: Gauze medical bandages
GOST 12.4.028-76: Respirators шб-1 "lepestok"
GOST 12026-76: Filter paper for laboratory application
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16317-87: Household electrical refrigeration devices
GOST 17206-84: Agar for microbiological investigations
GOST 17206-96: Agar for microbiological investigations. Specifications
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 177-88: Hydrogen peroxide
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 18481-81: Glass hydrometers and cylinders. General specifications
GOST 19569-89: Steam medical sterilizers
GOST 20292-74: Laboratory volumetric glassware. Burettes, pipettes
GOST 23134-78: Head-dresses medical. Specifications
GOST 23932-90: Laboratory glassware and equipment. General specifications
GOST 24363-80: Reagents. Potassium hydroxide. Specifications
GOST 24555-81: The state system of testing the production. The procedure of verification of testing equipment. General principle
GOST 24760-81: Women's medical overalls. Specifications
GOST 2493-75: Reagents. Potassium phosphate, dibasic 3-aqueous. Specifications
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 25644-96: Powder synthetic detergents. General technical requirements
GOST 28284-89: Head frames for weaving machines. Main dimensions
GOST 307-81: Domestic electric irons
GOST 3-88: Surgical rubber gloves
GOST 4148-78: Reagents. Ferrous (II) sulphate 7-aqueous. Specifications
GOST 4168-79: Reagents. Sodium nitrate. Specifications
GOST 4198-75: Reagents. Potassium dihydrogen phosphate. Specifications
GOST 4201-79: Reagents. Sodium bicarbonate. Specifications
GOST 4233-77: Reagents. Sodium chloride. Specifications
GOST 4234-77: Reagents. Potassium chloride. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 4523-77: Reagents. Magnesium sulphate 7-aqueous. Specifications
GOST 5556-81: Medical absorbent cotton
GOST 5833-75: Reagents. Saccharose. Specifications
GOST 5962-67: Rectified ethyl alcohol. Specifications
GOST 6672-75: Cover glasses for micropreparations. Specifications
GOST 6709-72: Distilled water. Specifications
GOST 857-88: Hydrochloric acid synthetic technical
GOST 857-95: Industrial synthetic hydrochloric acid
GOST 9095-89: Printing paper. Specification
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST 9284-75: Slides for micropreparations. Specifications
GOST 9412-77: Medical gauze. Specifications
GOST 9412-93: Medical gauze
GOST 975-88: Crystalline dextrose hydrate. Specifications
SN 245-71: Sanitary standards for the design of industrial enterprises
The Document is Referenced By:
GOST 10287-83: Dc electric meters
GOST 11700-80: Two-line lubricating stations. Specifications
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.4.035-78: Protective face shields
GOST 12271-76: The copolymers of styrene. Specifications
GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.
GOST 15152-69: Unified system of corrosion and ageing protection. Industrial rubber products for tropics. General requirements
GOST 15158-78: Paper and board with protective coating for packaging of goods and production of spare parts utilized in tropics. Specifications
GOST 15963-79: Electrical articles for tropical application. General technical requirements and methods of testing
GOST 16286-84: Potentiometric transducers SSI. Industrial auxiliary electrodes. Specifications
GOST 16287-77: Glass industrial electrodes for determination hydrogan ion activation SSI. Specifications
GOST 16712-95: Wood-protecting preparations. Test method for toxicity
GOST 16962.1-89: Electrical articles. Test methods as to environments climatic factors resistance
GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics
GOST 20790-82: Medical instruments, apparatus and equipment. General specifications
GOST 20790-93: Medical instruments, apparatus and equipment. General specifications
GOST 22649-83: Medical air sterilizers
GOST 25531-82: Lubricators. Specifications
GOST 25804.7-83: Atomic power station technological processes control system equipment. Evaluation methods of meeting durability, endurance and resistance requirements for highest influential factors
GOST 26032-83: System of standardized type structures of SSI aggregated complexes. General specifications
GOST 26035-83: Electronic meters of an alternating-current electricity
GOST 26816-2016: Cement-bonded wood boards. Specifications
GOST 28295-89: Collectors of electrical rotating machines
GOST 30028.2-93: Wood-protecting preparations. Container method testing way protective ability to wood-colouring and moulding fungus
GOST 30028.4-2006: Wood-protective means. Express-method of testing the protective ability to wood-colouring and moulding fungi
GOST 30028.4-93: Wood-protecting preparations. Express-method testing way protective ability to wood-colouring and moulding fungus
GOST 30206-94: Alternating current static watt-hour meters for active energy ( accuracy classes 0,2 S and 0,5 S)
GOST 30207-94: Alternating current static watt-hour meters for active energy (accuracy classes 1 and 2)
GOST 30459-2003: Additives for concretes and mortars. Methods of determining the efficiency
GOST 30630.0.0-99: Environment stabilty test methods for machines, instruments and other industrial products. General requirements
GOST 31818.11-2012: Electricity metering equipment (а.с). Particular General requirements. Tests and test conditions. Part 11. Meters for electric energy
GOST 31996-2012: Power cables with plastic insulation for rated voltages of 0,66; 1 and 3 kV. General specifications
GOST 34839-2022: Couplings for power cables up to and including 35 kV. General specifications
GOST 6570-96: Electrical induction active and reactive energy meters
GOST 6918-81: Line screen grease strainers. Specifications
GOST 9.049-91: Unified system of corrosion and ageing protection. Polymer materials and their components. Methods of laboratory tests for mould resistance
GOST 9.050-75: Unified system of corrosion and ageing protection. Varnish-and-paint coatings. Laboratory test methods to mould resistance
GOST 9.052-88: Unified system of corrosion and ageing protection. Oils and greases. Laboratory test methods for mould resistance
GOST 9.053-75: Unified system of corrosion and ageing protection. Non-metallic materials and articles with their application. Method of microbiological resistance tests under natural and atmospheric conditions
GOST 9.082-77: Unified protection corrosion and ageing system. Oils and lubricants. Methods of laboratory tests for resistance to bacteria action
GOST 9.085-78: Single corrosion and ageing protection system. Cooling lubricant. Bioresistance test methods
GOST 9.509-89: Unified system of corrosion and ageing protection. Means of temporary corrosion protection. Methods of determining protection ability
GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST 9.906-83: Unified system of corrosion and ageing protection. Test climatic stations. General requirements
GOST ED1 7164-78: Self-balancing servo instruments of SSI. General specifications. Export supplement
GOST R 50444-92: Medical instruments, apparatus and equipment. General specifications
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 52266-2020: Optical cables. General specifications
GOST R 52320-2005: Electricity metering equipment (а.с). General requirements. Tests and test conditions. Part 11. Meters for electric energy
GOST R 53769-2010: Рower cables with plastic insulation for rated voltages of 0,66; 1 and 3 kV. General specifications
GOST R 55025-2012: Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
GOST R 55732-2013: Mining equipment. Support of mine working. Polymer net for the guard mine working. Specifications
GOST R 56292-2014: Block-signalling cables. General specification
GOST R 57204-2016: Fabrics with rubber or plastic coating for aviation inflatable survival equipment. General technical requirements and test methods
GOST R 58342-2019: Power and control cables for use in electrical installations in explosive atmospheres. General specifications
GOST R 58416-2019: Cables are radio frequency. General specifications
GOST R 59555-2021: Profile products made of wood-polymer composite. Technical conditions
GOST R 7.0.2-2006: System of standards on information, librarianship and publishing. Conservation of documents on compact disks. General requirements
GOST R 70042-2022: Symmetrical communication cables for broadband access networks. General technical specifications
GOST R 70043-2022: Telephone cables with polyethylene insulation in a plastic sheath. General specifications
IM 14-7-2004: Automation. Instruments for measuring and regulating temperature. Part 2. Thermometers, alarms, indicators, frames, temperature relays, devices are different. Nomenclature directory
ODM 218.3.032-2013: Guidelines for strengthening the structural elements of roads by spatial geogrids
ODM 218.5.006-2010: Recommendations on testing methods for geosynthetic materials, depending on their field of application in the road sector
OST 26-01-1183-82: Aluminium vessels and devices. General technical specifications.
OST 36-13-90: Shields and consoles of automation systems for technological processes. General technical conditions
RD 50-541-85: Guidelines for the implementation of the standards of the Unified System for the Protection of Products and Materials Against Corrosion, Aging and Biodeterioration (ESHSC) in industries
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
ST RK GOST R 52320-2009: AC electricity metering equipment. General requirements for testing and testing conditions. Part 11. Meters for electric energy
STB GOST R 52320-2007: Equipment for measurement of alternating current of electrical power. General requirements. Tests and test conditions. Part 11. Electrical power recorders
TSN 20-303-2006: Protection of building structures, buildings and structures from aggressive chemical and biological environmental influences. St. Petersburg
TU 1394-006-86695843-10: Steel pipes with epoxy protective coating
TU 1394-011-86695843-2011: Steel pipes with an external two-layer epoxy coating resistant to ultraviolet radiation. Technical conditions
TU 14-3R-37-2000: Steel electric-welded longitudinal pipes with a diameter of 102–1220 mm with an external protective coating based on extruded polyethylene. Technical conditions
TU 63.070 op 37-86: Armodor-1 needle-punched rubberized canvas for road construction
VSN 008-88: Construction of trunk and field pipelines. Anticorrosion and heat insulation
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.