GOST R 51632-2000
ГОСТ Р 51632-2000
|
|
Technical aids for disabled persons. General technical requirements and test methods
Технические средства реабилитации людей с ограничениями жизнедеятельности. Общие технические требования и методы испытаний
Status: Not effective - Superseded. Registration information 1331-st dated 10/15/2014 (official website of Rosstandart); (IUS 11-2015)
This standard establishes general technical requirements, safety requirements and test methods for technical means of rehabilitation of people with disabilities. The standard applies to technical means of rehabilitation belonging to classes 03, 06, 09, 12, 18, 21 according to GOST R 51079
Настоящий стандарт устанавливает общие технические требования, требования безопасности и методы испытаний технических средств реабилитации людей с ограничениями жизнедеятельности. Стандарт распространяется на технические средства реабилитации, относящиеся к классам 03, 06, 09, 12, 18, 21 по ГОСТ Р 51079
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
7/21/2000
SKU: RUSS68284
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.11 Equipment and instruments for medical industry »
ISO classifier »
11 HEALTH »
11.180 Aids for persons with physical disabilities and injuries »
National standards »
11 HEALTH »
11.180 Aids for persons with physical disabilities and injuries »
ISO classifier »
11 HEALTH »
11.180 Aids for persons with physical disabilities and injuries »
11.180.01 Aids for persons with physical disabilities and injuries in general »
National standards »
11 HEALTH »
11.180 Aids for persons with physical disabilities and injuries »
11.180.01 Aids for persons with physical disabilities and injuries in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
R Health. Sanitation and hygiene items »
R2 Equipment and tools of medical institutions »
R20 Classification, nomenclature and general norms »
National Standards for OKSTU »
MEDICAL EQUIPMENT »
Classification, nomenclature. Terms and Definitions. Designation »
The Document is Replaced With:
GOST R 51632-2014: Technical aids for disabled persons. General technical requirements and test methods
The Document References:
Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being
GOST 10354-82: Polyethylene film Specifications
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.025-76: Medical equipment. Electrical safety
GOST 12.4.094-88: Occupational safety standards system. Method for determination of dynamical characteristics of human body under vibration action
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15158-78: Paper and board with protective coating for packaging of goods and production of spare parts utilized in tropics. Specifications
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 15898-70: Linen and semi-linen fabrics. Method of determination of flame-proof properties
GOST 17308-88: Twines. Specifications
GOST 18251-87: Gummed tape on paper substrate. Specifications
GOST 18510-87: Writing paper
GOST 19297-2003: Treated for fire-resistance cotton fabrics. Specifications
GOST 19569-89: Steam medical sterilizers
GOST 2.601-95: Operational documents
GOST 2.602-95: Unified system for design documentation. Repair documents
GOST 20477-86: Polyethylene tape with adhesive layer. Specifications
GOST 20790-82: Medical instruments, apparatus and equipment. General specifications
GOST 20790-93: Medical instruments, apparatus and equipment. General specifications
GOST 21753-76: Man -machine system control levers
GOST 21829-76: Man-machine system. Coding of visual information. General ergonomic requirements
GOST 2228-81: Paper for bags
GOST 22613-77: Man-machine system. Rotary switches and commutators. General ergonomic requirements
GOST 22649-83: Medical air sterilizers
GOST 22902-78: Man-machine system. Reading device of visual display. General ergonomic requirements
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 23436-79: Cable paper for insulation of power cables for voltage up to 35 kV inclusively. Specifications
GOST 23436-83: Cable paper for insulating power cables for voltage up to 35 kv inclusively
GOST 23941-2002: Noise of machines. Methods for determination of noise characteristics. General requirements
GOST 2697-83: Roofing asphalt felt. Specifications
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 27570.0-87: Safety of household appliances and similar devices
GOST 28594-90: Domestic radioelectronic equipment
GOST 2930-62: Measuring instruments. Characters and signs
GOST 30.001-83: The system of ergonomic and technical design standards. General principles
GOST 30324.0-95: Medical electrical equipment. Part 1. General safety requirements
GOST 30372-95: Electromagnetic compatibility of electronic equipment. Terms and definitions
GOST 31273-2003: Noise of machines. Determination of sound power levels using sound pressure. Precision methods for anechoic and semi-anechoic rooms
GOST 31274-2004: Noise of machines. Determination of sound power levels using sound pressure. Precision methods for reverberation rooms
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 3560-73: Sealing tepe
GOST 515-77: Bitumized and tarred packaging paper
GOST 7376-89: Corrugated paperboard
GOST 8273-75: Packing paper
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9569-79: Paraffin paper
GOST R 15.111-97: System product development and launching into manufacture. Technical aids for disabled persons
GOST R 50267.0.2-2005: Medical electrical equipment. Part 1-2. General requirements for safety. Electromagnetic compatibility. Requirements and test methods
GOST R 50267.0.2-95: Medical electrical equipment. Part 1. General requirements for safety. 2. Electromagnetic compatibility. Requirements and tests
GOST R 50267.0-92: Medical electrical equipment. Part 1. General safety requirements
GOST R 50397-92: Electromagnetic compatibility for electronic equipment. Terms and definitions
GOST R 50444-92: Medical instruments, apparatus and equipment. General specifications
GOST R 50810-95: Fire hazard of textiles. Decorative textiles. Flammability test method and classification
GOST R 50948-2001: Display means for individual use. General ergonomic requirements and safety requirements
GOST R 51079-97: Technical aids for disabled persons. Classification
GOST R 51191-98: Units of lower-limb prostheses. General technical requirements
GOST R 51264-99: Electronics aids disabled persons. General specifications
GOST R 51317.4.3-99: Electromagnetic compatibility of technical equipment. Radiated, radio-frequency, electromagnetic field immunity. Requirements and test methods
GOST R 51318.11-99: Electromagnetic compatibility of technical equipment. Radio disturbance from industrial, scientific, medical and domestic (ISMD) radio-frequency equipment. Limits and test methods
GOST R 51318.14.1-99: Electromagnetic compatibility of technical equipment. Radio disturbance from household appliances, electric tools and similar apparatus. Limits and test methods
GOST R 51320-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance. Test methods for technical equipment which are man-made radio disturbance sources
GOST R 51400-99: Noise of machines. Determination of sound power levels using sound pressure. Engineering methods for small, movable sources in reverberant fields for hard - walls test rooms and for special reverberation test rooms
GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
GOST R 51935-2002: Steam large sterilizers. General technical requirements and test methods
GOST R IEC 878-95: Graphical symbols electrical equipment in medical practice
The Document is Referenced By:
GOST R 51191-2007: Units of lower-limb prostheses. Technical requirements and test methods
GOST R 52114-2003: Units mechanics of upper-limb prostheses. Technical requirements and test methods
GOST R 52114-2009: Units mechanics of upper-limb prostheses. Technical requirements and test methods
GOST R 52878-2007: Tutors on upper and lower-limbs. Technical requirements and test methods
GOST R 53346-2009: Units of lower-limb orthoses. Technical requirements and test methods
GOST R 53869-2010: Prostheses of lower-limb. Technical requirements
GOST R 54739-2011: Orthopaedic footwear products. General specifications
GOST R 56137-2014: Prosthetics and orthotics. Quality control prostheses and orthoses lower limb with individual parameters manufacturing
GOST R 56138-2014: Upper limb prostheses. Technical requirements
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Potassium chloride
Language: English |
United power system and isolated power systems. Operative-dispatch management. Frequency control and control of active power. Norms and requirements
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.