GOST R 54794-2011
ГОСТ Р 54794-2011
|
|
Analysers of the content of ethanol. General specifications
Анализаторы паров этанола. Общие технические условия
Status: Effective - Introduced for the first time. IUS 6-2013
This standard applies to ethanol vapor analyzers designed to measure the mass concentration of ethanol vapor in an exhaled breath sample and display the measurement result in digital form on a display and paper media using an integrated or external printer. This standard applies to analyzers used in the state regulation of ensuring the uniformity of measurements.
Настоящий стандарт распространяется на анализаторы паров этанола, предназначенные для измерения массовой концентрации паров этанола в отобранной пробе выдыхаемого воздуха и отображения результата измерения в цифровой форме на дисплее и бумажном носителе с помощью встроенного или внешнего принтера. Настоящий стандарт распространяется на анализаторы, применяемые в сфере государственного регулирования обеспечения единства измерений
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/13/2011
SKU: RUSS68351
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.7 Instruments for determining composition, state and properties of substances »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T80 Rules, norms, regulations infield of ensuring uniformity of measurements »
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 2.114-2016: Unified system for design documentation. Specifications
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 20790-93: Medical instruments, apparatus and equipment. General specifications
GOST 30324.0-95: Medical electrical equipment. Part 1. General safety requirements
GOST 8.578-2014: State system for ensuring the traceability of measurements. State hierarchy scheme for measuring instruments of the content of components in gaseous mediums
GOST 9293-74: Gaseous and liquid nitrogen. Specifications
GOST R 50267.0.2-2005: Medical electrical equipment. Part 1-2. General requirements for safety. Electromagnetic compatibility. Requirements and test methods
GOST R 50267.0-92: Medical electrical equipment. Part 1. General safety requirements
GOST R 50444-92: Medical instruments, apparatus and equipment. General specifications
GOST R 8.654-2015: State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 8.676-2009: State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring ethanol content in gaseous and liquid media
GOST R 8.736-2011: State system for ensuring the uniformity of measurements. Multiple direct measurements. Methods of measurement results processing. Main principles
Order 1815: The procedure for verification of measuring instruments, requirements for the verification mark and the content of the verification certificate
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.104-09: State system for ensuring uniformity of measurements. Procedure for testing standard samples or measuring instruments for type approval
R 50.2.038-2004: State system for ensuring the uniformity of measurements. Direct single measurements. Estimation of errors and uncertainty of measurements result
The Document is Referenced By:
GOST R 8.838-2013: State system for ensuring the uniformity of measurements. Ethanol Content Analysers. Verification procedure
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
