GOST R 8.788-2012

ГОСТ Р 8.788-2012

State system for ensuring the uniformity of measurements. Mass of mazut. Measurement procedure in vertical storage tanks. General metrological requirements

Государственная система обеспечения единства измерений. Масса мазута. Методика измерений в вертикальных резервуарах методом статистических измерений. Общие метрологические требования

Status: Effective - Introduced for the first time. IUS 9-2013

This standard establishes the general metrological requirements for methods for measuring the mass of fuel oil (according to GOST 10585) in stationary vertical tanks with a nominal capacity of 100 to 100,000 cubic meters. indirect static measurement method

Настоящий стандарт устанавливает общие метрологические требования к методикам измерений массы мазута (по ГОСТ 10585) в стационарных вертикальных резервуарах, номинальной вместимостью от 100 до 100000 м куб. косвенным методом статических измерений

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 24

Approved: Federal Agency for Technical Regulation and Metrology, 11/27/2012

SKU: RUSS68371

Price: $309.43




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

PromExpert » SECTION II. METROLOGICAL » II Measurements » 3 Measurement of flow parameters, flow rate, level, volume of substances »

PromExpert » SECTION II. METROLOGICAL » I Organizational and technical bases of metrological support » 1 Organization and management of metrological support » 1.1 Basic provisions of metrological support »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.060 Measurements of volume, mass, density, viscosity »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.060 Measurements of volume, mass, density, viscosity »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T88 Methods of verification and metrological certification ��

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T88 Methods of verification and metrological certification » T88.1 Measurement of geometric quantities »


The Document References:

GOST 10585-2013: Petroleum fuel. Mazut. Specifications

GOST 10585-99: Oil fuel. Mazut. Specifications

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 18481-81: Glass hydrometers and cylinders. General specifications

GOST 2477-2014: Petroleum and petroleum products. Method for determination of water content

GOST 2517-2012: Petroleum and petroleum products. Methods of sampling

GOST 28498-90: Liquid-in-glass thermometers

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 6370-2018: Petroleum, petroleum products and additives. Method for determination of mechanical admixtures

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8.570-2000: State system for ensuring the uniformity of measurements. Steel vertical cylindrical tanks. Calibration methods

GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.568-2017: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

GOST R 8.580-2001: State system for ensuring the uniformity of measurements. Determination and application of precision data in relation to petroleum products tests methods

GOST R 8.595-2004: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements for procedures of measurements

MI 3171-2008: Recommendation. State system for ensuring uniformity of measurements. Steel vertical cylindrical tanks. Geometric calibration technique using laser scanning coordinate measuring systems

PR 50.2.006-94: Procedure for calibration of measurement equipment

PR 50.2.104-09: State system for ensuring uniformity of measurements. Procedure for testing standard samples or measuring instruments for type approval

R 50.2.075-2010: State System for ensuring the uniformity of measurements. Crude Petroleum and Petroleum Products. Laboratory Methods for Determination of Density, Relative Density and API Gravity

R 50.2.076-2010: State system for ensuring the uniformity of measurements. Density of petroleum and petroleum products. Methods of calculation. Programme and tables of calculation

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $106.92
High strength rolled steel. General specification
Language: English
Price: $144.54
Cable products. Requirements of fire safety.
Language: English
Price: $90.09
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Seamless steel pipes for boiler plants and pipelines
Language: English
Price: $408.80
Explosive atmospheres. Part 0. Equipment. General requirements
Language: English
Price: $1,118.41
Steel structures
Language: English
Price: $297.00
Loads and actions
Language: English
Price: $495.00
Structural steel structure rolled products. General specifications
Language: English
Price: $120.78
Mechanical reinforcement connections for reinforced concrete structures. Test methods
Language: English
Price: $218.25
Mechanical reinforcement couplers for reinforced concrete structures. Specifications
Language: English
Price: $165.87
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $307.89
Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety «c»
Language: English
Price: $334.65
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Mixtures classification of hazard for health
Language: English
Price: $121.77
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements
Language: English
Price: $524.70

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!