imgalt

GOST 8752-79

ГОСТ 8752-79

Metal insert rubber seals for rotating. Specifications

Манжеты резиновые армированные для валов. Технические условия

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 2-92 of the IGU dated 05.10.92 (IUS 2-1993)

The standard applies to rubber reinforced single-edged cuffs with a spring for sealing shafts operating in mineral oils, water, diesel fuel at an overpressure of up to 0.05 MPa (0.5 kgf

Стандарт распространяется на резиновые армированные однокромочные манжеты с пружиной для уплотнения валов, работающих в минеральных маслах, воде, дизельном топливе при избыточном давлении до 0,05 МПа (0,5 кгс/кв.см), скорости до 20 м/c и температуре от минус 60 до плюс 170°С в зависимости от группы резины.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Product Quality and Standards Management, 1/24/1979

SKU: RUSS68470

Price: $669.00



imgalt

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 018/2011 TR CU. On safety of wheeled vehicles » Regulations and standards (to 018/2011 TR CU) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.10 Testing and monitoring products of rubber and plastics industry » 4.10.1 Rubber products »

ISO classifier » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.140 Rubber and plastic products » 83.140.50 Seals »

National standards » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.140 Rubber and plastic products » 83.140.50 Seals »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L6 Rubber and asbestos products » L63 Rubber technical products »

National Standards for OKSTU » RUBBER AND ASBESTOS PRODUCTS » Shaped products for seals »


As a Replacement Of:

GOST 8752-70: Cuffs, of rubber, reinforced for shafts

OST 26-08-504-72: Cuffs, of rubber, reinforced for shafts. Types and main dimensions

The Document References:

GOST 10131-93: Wooden boxes and boxes from timber-based materials for the food industry, agriculture, and matches

GOST 13511-91: Boxes of corrugated board for food-stuffs, matches, tobacco and detergents. Specifications

GOST 13512-91: Boxes made of corrugated cardboard for confectionery

GOST 13943-86: Retaining spring flat eccentric rings for bores and grooves for them. Dimensions

GOST 14192-96: Cargo marking

GOST 14296-78: Grease ВНИИ НП-279. Specifications

GOST 15841-88: Wooden boxes for the production of agricultural and tractor machine-building industry

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 16536-90: Wooden boxes for automotive industry products

GOST 18573-86: Wooden boxes for the production of chemical industry

GOST 2.124-85: Sequence of application of purchased products

GOST 22852-77: Corrugated fibre boxes for products of instruments making industry. Specifications

GOST 26.008-85: Lettering for inscriptions applied by engraving method. Executive dimensions

GOST 263-75: Rubber. Method for the determination of Shore A hardness

GOST 269-66: Rubber. General requirements for the physical mechanical tests

GOST 270-75: Rubber. Method of the determination elastic and tensile stress-strain properties

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2930-62: Measuring instruments. Characters and signs

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 3134-78: White spirit

GOST 515-77: Bitumized and tarred packaging paper

GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications

GOST 8828-89: Base paper and two-layer waterproof packaging paper

GOST 9.024-74: Unified system of corrosion and ageing protection. Rubbers. Methods of heat ageing stability determination

GOST 9.029-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing of resistance to ageing under static deformation of compression

GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

GOST 9433-80: Grease ЦИАТИМ-221. Specifications

GOST 9481-76: Corrugated board boxes for chemical threads. Technical requirements

GOST 9569-79: Paraffin paper

Letter 1353-OG/03: About the presence of a typo in GOST 8752-79

The Document is Referenced By:

Decision 219: The list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of the technical regulations of the Customs Union "On the safety of wheeled vehicles". (TR CU 018/2011), and a list of international and regional (interstate) standards, and in their absence - national (state) standards containing the rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulations of the Customs Union "On the safety of wheeled vehicles" (TR CU 018/2011) (TR CU 018/2011) and conformity assessment of objects of technical regulation

GOST 13219.10-81: High cups with cup seal for diameters from 110 till 400 mm of pillow blocks. Construction and dimensions

GOST 13219.5-81: Low cups with cup seal for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions

GOST 13219.6-81: Low cups with cup seal for diameters from 100 till 400 mm of pillow blocks. Construction and dimensions

GOST 13219.7-81: Medium cups with cup seal for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions

GOST 13219.8-81: Medium cups with cup seal for diameters from 110 till 400 mm of pillow blocks. Construction and dimensions

GOST 13219.9-81: High cups with cup seal for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions

GOST 13556-91: Building tower pillars building tower pillars

GOST 16162-85: Standard reducers. General specifications

GOST 18512-73: End caps with recess for cup seal. Design and dimensions

GOST 19099-86: Lubricating systems

GOST 25878-2018: Steel molds for the manufacture of reinforced concrete products. Pallets Technical specifications

GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions

GOST 26546-85: Chain variators. General specifications

GOST 26957-86: Variator with wide angle belt pulleys. General specifications

GOST 26957-97: Variators with wide-angle belt pulleys. General specifications

GOST 30222-95: Cone variable speed drives. General specifications

GOST 30223-95: Motorised conveyor drums. General specifications

GOST 31592-2012: Machine reducers. General specifications

GOST 5006-83: Toothed clutches. Specifications

GOST R 50891-96: Machine reducers. General specifications

GOST R 50895-96: Toothed clutches. Specifications

GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements

Letter 1353-OG/03: About the presence of a typo in GOST 8752-79

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 22-207-88: Lifting machines. General requirements and production standards

RD 36-62-00: Hoisting equipment. General technical requirements.

ST TsKBA 057-2008: Pipe fittings. The friction coefficients in the nodes of reinforcement

TU 34-38-20310-96: Centrifugal multistage sectional pumps CNS 180-85 ... 425. Technical conditions for repair

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!