GOST R 51342-99

ГОСТ Р 51342-99

Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards

Безопасность машин. Съемные защитные устройства. Общие требования по конструированию и изготовлению неподвижных и перемещаемых съемных защитных устройств

Status: Effective - Introduced for the first time. IUS 2-2000

The standard defines the requirements for the design and manufacture of removable protective devices, which are primarily intended to protect people from mechanical hazards. The standard applies mainly to machines that are supplied after the release of this standard, to the rules for the use of removable protective devices to minimize the danger due to non-mechanical reasons. The requirements of the standard are valid for fixed and mobile protective devices. The standard does not apply to parts that act on blocking devices (see GOST R 51345) and does not contain requirements for special protection systems that are designed to install and lift loads and to protect against falling objects.

Стандарт определяет требования к конструированию и производству съемных защитных устройств, которые в первую очередь предназначены для защиты людей от механических опасностей. Стандарт распространяется, в основном, на машины, которые поставлены после выхода настоящего стандарта, на правила применения съемных защитных устройств для минимизации опасности из-за немеханических причин. Требования стандарта справедливы для неподвижных и подвижных защитных устройств. Стандарт не распространяется на детали, воздействующие на блокировочные устройства (см. ГОСТ Р 51345), и не содержит требований к специальным системам защиты, которые предназначены для установки и подъема грузов и для защиты от падающих объектов.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 22

Approved: Gosstandart of Russia, 11/22/1999

SKU: RUSS68726

Price: $332.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 13 Environmental protection, protection of people from environmental exposure. Security »

Welding regulations » Welding work »

Welding regulations » Welding materials »

Welding regulations » welding equipment »

Welding regulations » Welding staff »

Welding regulations » Documentation »

Welding regulations » Defects »

Welding regulations » Welding work » Dusting »

Welding regulations » Welding materials » Gases »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.2 Operation of production machines and equipment »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.110 Safety of machinery »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.110 Safety of machinery »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G0 General rules and regulations for engineering » G07 Safety »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Occupational safety standards system (SSBT). Scientific organization of labor. Safety precautions. Sanitation and occupational health »


The Document References:

GOST 30457-97: Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points. Engineering method

GOST EN 1070-2003: Safety of machinery. Terms and definitions

GOST R 51333-99: Safety of machinery. Basic concepts, general principles for design. Basic terminology, technical principles and specifications

GOST R 51334-99: Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs

GOST R 51335-99: Safety of machinery. Minimum gaps to avoid crushing of parts of the human body

GOST R 51338-99: Safety of machinery. Reduction of risk to health from hazardous substances emitted by machinery. Part 1. Principles and specifications for machinery manufacturers

GOST R 51339-99: Safety of machinery. Safety distances to prevent danger zones being reached by the lower limbs

GOST R 51344-99: Safety of machinery. Principles for risk assessment

GOST R 51345-99: Safety of machinery. Interlocking devices associated with guards. Principles for design and selection

GOST R IEC 60204-1-99: Safety of machinery. Electrical equipment of machines. Part 1. General requirements

The Document is Referenced By:

GOST 31733-2012: Hydraulic presses. Safety requirements

GOST 31840-2012: Submersible pumps and pump units. Safety requirements

GOST 32617-2014: Irrigation machines. Safety

GOST EN 12042-2013: Food processing machinery and equipment. Automatic dividers. Safety and hygiene requirements

GOST EN 12984-2013: Food processing machinery and equipment. Portable and/or hand-guided machines and appliances with mechanically driven cutting tools. Safety and hygiene requirements

GOST EN 13019-2012: Machines for road surface cleaning. Safety requirements

GOST EN 13021-2012: Winter service machines. Safety requirements

GOST EN 13288-2013: Food processing machinery and equipment. Lifting and tilting machines. Safety and hygiene requirements

GOST EN 13389-2013: Food processing machinery and equipment. Mixers with horizontal shafts. Safety and hygiene requirements

GOST EN 13524-2012: Highway maintenance machines. Safety requirements

GOST EN 13534-2013: Food processing machinery and equipment. Curing injection machines. Safety and hygiene requirements

GOST EN 13591-2013: Food processing machinery and equipment. Fixed deck oven loaders. Safety and hygiene requirements

GOST EN 13870-2013: Food processing machinery and equipment. Chop cutting machines. Safety and hygiene requirements

GOST EN 1501-2-2012: Refuse collection vehicles and associated lifting devices. General requirements and safety requirements. Part 2. Side loaded refuse collection vehicles

GOST EN 1672-1-2014: The equipment for the food industry. Requirements for safety and hygiene. The main provisions. Part 1. Safety requirements

GOST EN 454-2013: Food processing machinery and equipment. Planetary mixers. Safety and hygiene requirements

GOST ISO/TO 12100-2-2002: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles and technical requirements

GOST R 51333-99: Safety of machinery. Basic concepts, general principles for design. Basic terminology, technical principles and specifications

GOST R 51345-99: Safety of machinery. Interlocking devices associated with guards. Principles for design and selection

GOST R 52615-2006: Compressors and vacuum pumps. Safety requirements. Part 2. Vacuum pumps

GOST R 52648-2006: Machines and equipment for timber floating. Safety requirements. Control methods of safety requirements

GOST R 52743-2007: Pumps and pump units for pumping of liquids. General safety requirements

GOST R 52744-2007: Submersible pumps and pump units. Safety requirements

GOST R 53010-2008: Hydraulic presses. Safety requirements

GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements

GOST R 54431-2011: Metal-working machines. General safety requirements

GOST R 54770-2011: Elevating work platforms. Mast-climbing work platforms. Calculating of structure, safely requirements, test methods

GOST R 54967-2012: Food processing machinery and equipment. Сutters. Safety and hygiene requirements

GOST R 54968-2012: Food processing machinery. Mixing machines. Safety and hygiene requirements

GOST R 54969-2012: Food processing machinery and equipment. Equipment for pasta pressing. Safety and hygiene requirements

GOST R 54970-2012: Food processing machinery. Centrifugal devices for drying vegetables and fruits. Safety and hygiene requirements

GOST R 54971-2012: Food processing machinery. Spreaders, stripping and cutting machines, stick return conveyors, stick magazines. Safety and hygiene requirements

GOST R 54972-2012: Food processing machinery and equipment. Filling machines and auxiliary machines. Safety and hygiene requirements

GOST R 55560-2013: Inland water transport. Operation of cargo transfer complexes and passenger terminals of river ports. Safety requirements. General

GOST R 57618.4-2017: Small craft infrastructure. Repair bases and services. General requirements

GOST R 58754-2019: Mobile scaffolds with a movable workplace. Technical specifications

GOST R EN 1010-1-2009: Printing machinery. Safety requirements for the design and construction. Part 1. General requirements

GOST R EN 1010-3-2009: Printing machinery. Safety requirements for the design and construction. Part 3. Cutting machines

GOST R EN 1034-1-2012: Paper-making and finishing machines. Safety requirements for the design and construction. Part 1. General requirements

GOST R EN 12717-2006: Safety of machine tools. Drilling machines

GOST R EN 12750-2012: Safety of woodworking machines. Four sided planning (longitudinal and milling) machines

GOST R EN 12840-2006: Safety of machine-tools. Manually controlled turning machines with or without automatic control

GOST R EN 12853-2012: Food processing machinery. Hand-held blenders and whisks. Safety and hygiene requirements

GOST R EN 12957-2007: Safety of metal-working machine tools. Electrodisharge machines

GOST R EN 13218-2006: Safety of machine-tools. Stationary grinding machines

GOST R EN 13788-2007: Safety of metal-working machine tools. Multi-spindle automatic turning machines

GOST R EN 13898-2009: Machine tools. Safety. Sawing machines for metal cold cutting

GOST R EN 14655-2012: Food processing machinery. Baguette slices. Safety and hygiene requirements

GOST R EN 1678-2012: Food processing machinery and equipment. Vegetable cutting machines. Safety and hygiene requirements

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!