GOST R 51910-2002
ГОСТ Р 51910-2002
|
|
Research and testing strategy by accelerated methods of environmental conditions influence for industrial products longevity and storage ability. Development and design
Методика исследования и проверки ускоренными методами влияния внешних воздействующих факторов на долговечность и сохраняемость технических изделий. Разработка и построение
Status: Effective - Introduced for the first time. For newly developed products; from 01.01.2004 for products developed before 01.01.2002
The standard applies to machines, devices and other technical products of all kinds and polymeric materials, metals and alloys used for these products; parts and components of them; polymer systems, electrical insulation systems; protective coatings against corrosion. The standard establishes the general requirements for the construction of a methodology for research and verification by accelerated methods of the influence of external influencing factors on the durability and persistence of products and / or their parts and assemblies, materials, systems of materials and coatings.
Стандарт распространяется на машины, приборы и другие технические изделия всех видов и применяемые для этих изделий полимерные материалы, металлы и сплавы; детали и узлы из них; полимерные системы, системы электрической изоляции; защитные покрытия от коррозии. Стандарт устанавливает общие требования к построению методики исследования и проверки ускоренными методами влияния внешних воздействующих факторов на долговечность и сохраняемость изделий или (и) их деталей и узлов, материалов, систем материалов и покрытий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
7/4/2002
SKU: RUSS68734
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
11. Piping valves (TPA) tests »
11.4 Special test procedures »
11.4.3 On certain types of external impacts »
Standards for pipe fittings (TPA) »
11. Piping valves (TPA) tests »
11.4 Special test procedures »
11.4.2 Climatic testing »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.1 General requirements for tests on external factors »
ISO classifier »
19 TESTS »
19.040 Climatic tests »
National standards »
19 TESTS »
19.040 Climatic tests »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T51 Documentation system that determines indicators of quality, reliability and durability of products »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
State Standardization System (SSS) »
The Document References:
GOST 10518-88: Electrical insulation systems and other polymer systems. General requirements for methods of accelerated test for thermal endurance
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 26883-86: Exposure factors. Terms and definitions
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 30630.0.0-99: Environment stabilty test methods for machines, instruments and other industrial products. General requirements
GOST 30630.1.2-99: Mechanical environment stability test methods for machines, instruments and other industrial products. Tests for influences of vibration
GOST 30631-99: General requirements for machines, instruments and other industrial products as to environment mechanical stability
GOST 9.045-75: Unified system of corrosion and ageing protection. Paint coatings. Accelerated methods of light-fastness determination
GOST R 51368-99: Climatic environment stability test methods for machines, instruments and other industrial products. Test for stability influence of temperature
GOST R 51369-99: Climatic environment stability test methods machines, instruments and other industrial products. Test for influence of humidity
GOST R 51370-99: Climatic environment stability test methods for machines, instruments and other industrial products. Test for influence of solar radiation
GOST R 51371-99: Mechanical environment stability test methods for machines, instruments and other industrial products. Test for influence of shocks
GOST R 51372-99: Accelerated life and storable life tests methods in special aggressive and other special medias for technical products, material and systems of materials. General
GOST R 51684-2000: Climatic environment stability test methods of machines, instruments and other industrial products. Test for low air pressure
GOST R 51801-2001: General requirements for machines, instruments and other industrial products as to chemically active and other special media endurance
GOST R 51802-2001: Aggressive and other special media stability test methods for machines, instruments and other industrial products
GOST R 51804-2001: Environment, stability test methods for machines, instruments and other industrial products. Combined tests
GOST R 51908-2002: General requirements for machines, instruments and other industrial products as to storage and transporting conditions
The Document is Referenced By:
GOST R 57375-2016: Gas distribution systems. Gas distribution networks. Service life assessment in design of technological devices
GOST R 58341.2-2019: Diesel generator sets of nuclear power plants. Accounting for actually depleted resource and estimation of residual resource
GOST R 58341.8-2021: Electric motors of the nuclear power plant unit. Accounting of actually worked out and estimation of residual resource
|
Customers Who Viewed This Item Also Viewed:
 |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
