GOST R 52434-2005
ГОСТ Р 52434-2005
|
|
Active infra-red detectors. General technical requirements and test methods
Извещатели охранные оптико-электронные активные. Общие технические требования и методы испытаний
Status: Effective - Introduced for the first time
This standard establishes the requirements for active optical-electronic security detectors for closed rooms and methods for their testing. The standard establishes requirements for detectors, which should ensure their normal operation with a minimum number of false alarms and compatibility of detectors with other parts of the alarm system. This standard should be used in conjunction with GOST R 50775, IEC 60839-1-3 and IEC 60839-2-2. The standard also establishes the requirements and test methods for active optical-electronic detectors operating in open areas. The standard does not apply to special-purpose detectors.
Настоящий стандарт устанавливает требования к активным оптико-электронным охранным извещателям для закрытых помещений и методы их испытаний. Стандарт устанавливает требования к извещателям, которые должны обеспечить их нормальное функционирование при минимальном числе ложных срабатываний и совместимость извещателей с другими частями системы тревожной сигнализации. Настоящий стандарт должен применяться совместно с ГОСТ Р 50775, МЭК 60839-1-3 и МЭК 60839-2-2. Стандарт устанавливает также требования и методы испытаний к активным оптико-электронным извещателям, эксплуатируемым на открытых площадках. Стандарт не распространяется на извещатели специального назначения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/28/2005
SKU: RUSS68754
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.4 Means of measurement, control, management and testing »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.8 Regulation, automatics and telemechanics »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.310 Crime protection »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.310 Crime protection »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P7 Regulation, automatics and telemechanics »
P77 Devices and equipment for telemetry, telecontrol and telealarm »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12.1.031-81: Occupational safety standards system. Lasers. Methods of dosimetrical control of laser radiation
GOST 12.1.040-83: Occupational safety standards system. Laser safety. General
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12997-84: SSI Products. General specifications
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 2023.1-88: Lamps for road vehicles. Dimensional, electrical and luminous requirements
GOST 2239-79: General purpose
GOST 26342-84: Means of alarm, fire and alarm-fire systems. Types, basic parameters and dimensions.
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 28198-89: Basic environmental testing. Part 1. General and quidance
GOST 28199-89: Basic environmental, testing procedures. Part 2. Tests. Test A: Cold
GOST 28200-89: Basic environmental testing procedures. Part 2. Tests. Test B: Dry heat
GOST 28203-89: Basic environmental testing procedures. Part 2. Tests. Test Fc and guidance: Vibration ( sinusoidal )
GOST 28236-89: Basic environmental testing procedures. Part 3. Background information. Section 1. Cold and dry heat tests
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 597-73: Drawing paper
GOST 7338-90: Rubber and rubber-fabric sheets. Specifications
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
GOST R 27.002-2009: Dependability in technics. Terms and definitions
GOST R 27.403-2009: Dependability in technics. Compliance tests plans for reliability
GOST R 50009-2000: Electromagnetic compatibility of technical equipment. Components of intruder alarm systems. Requirement and test methods
GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General
GOST R 52931-2008: Instruments for process monitoring and control. General specifications
GOST R IEC 60065-2002: Audio-, video- and similar electronic apparatus. Safety requirements
GOST R IEC 60081-99: Double-capped fluorescent lamps. Performance specifications
The Document is Referenced By:
GOST R 50776-95: Alarm systems. Part 1. General requirements. Section 4. Code of practice
GOST R 52435-2015: Alarm intruder technical means. Classification. General technical requirements and test methods
GOST R 52551-2006: Guard and security systems. Terms and definitions
GOST R 53704-2009: Complex and integrated security systems. General technical requirements
GOST R 54455-2011: Alarm systems. Environmental test methods
GOST R 56102.2-2015: Centralized security monitoring systems. Part 2. Subsystem for mounting at protected facility. General technical requirements and test methods
R 069-2017: Recommendations on the selection and use of penetration detection tools, depending on the degree of importance and danger of protected objects
R 076-2018: Guidelines. False alarms of technical means of security alarms and methods of dealing with them
R 081-2019: Guidelines. The selection and use of technical means of protection to protect the cultural heritage of the Russian Federation from criminal attacks
R 084-2019: Requirements for the functional properties of technical security equipment at facilities subject to mandatory protection by the troops of the National Guard of the Russian Federation and the rules for their mandatory confirmation of compliance with the established technical requirements
R 78.36.018-2011: Safety guide on nuclear energy use. Unified control procedures of base materials (semi-products), weld joints and build-ups of equipment and pipelines of nuclear energy plants. Dye penetrant inspection.
R 78.36.022-2012: Use of radio-wave and combined detectors for increase of detection capacity and interference protection. Guidance manual
R 78.36.026-2012: Recommendations on the use of detection equipment based on various physical principles for the protection of fenced territories and open sites
R 78.36.028-2012: Technical devices for intrusion and threat detection of various types. Peculiarities of choice, operation and use depending on the degree of importance and hazard of the facilities
R 78.36.050-2015: Selection and use of active opto-electronic detectors for blocking internal and external perimeters, doors, windows, windows and approaches to individual objects. Guidelines
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
