GOST R 53174-2008
ГОСТ Р 53174-2008
|
|
Electric generating plants with diesel and gas internal combustion engines. General specifications
Установки электрогенераторные с дизельными и газовыми двигателями внутреннего сгорания. Общие технические условия
Status: Not effective - Canceled. Registration information 731-st dated 06/15/2015 (the official website of Rosstandart); IUS 1-2016
The standard applies to power generating sets up to 5,000 kW driven by internal combustion engines used on land and sea. The standard does not apply to power generating sets used on aircraft or to drive ground vehicles and locomotives.
Стандарт распространяется на электрогенераторные установки мощностью до 5000 кВт с приводом от двигателей внутреннего сгорания, применяемые на суше и море. Стандарт не распространяется на электрогенераторные установки, используемые на летательных аппаратах или для привода наземных автотранспортных средств и локомотивов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/18/2008
SKU: RUSS68767
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.2 Engines, turbines »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.020 Internal combustion engines »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.020 Internal combustion engines »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E6 Electric machines, transformers and converters »
E62 Generators »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10032-80: Stationary, mobile or marine auxiliary diesel generators
GOST 10150-88: Marine, diesel locomotive and industrial diesel engines
GOST 10511-83: Automatic rotational frequency control systems (ARFCS) of marine, locomotive
GOST 11828-86: Rotating electrical machines. General test methods
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements
GOST 12.4.040-78: Industrial equipment controls
GOST 14228-80: Automatic diesel engines and gas engines. Classification according to scope of automatization
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 14965-80: Three-phase synchronous generators of power over 100 kw
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15543-70: Electrical articles. Applications for different climatic regions. General technical requirements as to environment climatic aspects influence
GOST 16556-81: Grounding rods for mobile electrical equipment
GOST 17516-72: Electrical articles. Operating conditions as to environment mechanical aspects influence
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 20375-83: Power generating sets and mobile electric power stations with internal combustion engines. Terms and definitions
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 22407-85: Synchronous explicit-pole generators of general purpose
GOST 23162-78: Generating sets and moving power stations with internal-combustion engines. System of symbols
GOST 23377-84: Mobile electric power stations
GOST 24297-87: Input inspection of products. General provisions.
GOST 26363-84: Power generating sets and mobile electric power stations with internal combustion engines. Rules of marking, parking, transportation and storage
GOST 26658-85: Electric generating sets and mobile power stations with internal combustion engines. Test methods
GOST 27482-87: Output devices for electric energy take-off of electric units and mobile electric power stations with internal combustion engines. Types and main parameters
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 51317.6.3-99: Electromagnetic compatibility of technical equipment. Emission from technical equipment intended for use in residential, commercial and light-industry environments. Limits and test methods
GOST R 53176-2008: Electric generating plants with gasoline, diesel and gas internal combustion engines. Reliability indexes. Requirements and test methods
GOST R 53178-2008: Electric generating plants with gasoline, diesel and gas internal combustion engines. Test methods
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R ISO 8528-1-2005: Reciprocating internal combustion engine driven alternating current generating sets. Part 1. Application, ratings and performance
GOST R ISO 8528-5-2005: Reciprocating internal combustion engine driven alternating current generating sets. Part 5. Generating sets
The Document is Referenced By:
GOST 31464-2012: Mixes egg liquid and dry food. General specification
GOST R 55437-2013: Reciprocating internal combustion engines. Classification according to scope of automatization and technical requirement for automatization
|
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
