GOST R 53702-2009
ГОСТ Р 53702-2009
|
|
Alarms guarding surface vibration detectors for blocking of structures and safes. General technical requirements and test methods
Извещатели охранные поверхностные вибрационные для блокировки строительных конструкций закрытых помещений и сейфов. Общие технические требования и методы испытаний
Status: Effective - Introduced for the first time
This standard applies to newly developed and upgraded security surface vibration detectors installed in premises and designed to work in alarm systems according to GOST R 50775 to detect damaging effects on building structures and safes when an intruder attempts to enter a room through a building structure or break into a safe . This standard should be used in conjunction with GOST R 50775 and GOST R 52435. The standard does not apply to special-purpose detectors.
Настоящий стандарт распространяется на вновь разрабатываемые и модернизируемые охранные поверхностные вибрационные извещатели, устанавливаемые в помещениях и предназначенные для работы в системах тревожной сигнализации по ГОСТ Р 50775 с целью обнаружения разрушающих воздействий на строительные конструкции и сейфы при попытке нарушителя проникнуть в помещение через строительную конструкцию или взломать сейф. Настоящий стандарт должен применяться совместно с ГОСТ Р 50775 и ГОСТ Р 52435. Стандарт не распространяется на извещатели специального назначения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/15/2009
SKU: RUSS68778
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.4 Means of measurement, control, management and testing »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.8 Regulation, automatics and telemechanics »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.320 Alarm and warning systems »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.320 Alarm and warning systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P7 Regulation, automatics and telemechanics »
P77 Devices and equipment for telemetry, telecontrol and telealarm »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.050-86: Occupational safety standards system. Methods of noise measurement at work-places
GOST 14192-96: Cargo marking
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 166-89: Vernier callipers. Specifications
GOST 17168-82: Octave and one-third-of-octave electronic filters
GOST 2.053-2006: Unified system for design documentation. Product electronic structure. General
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 24297-87: Input inspection of products. General provisions.
GOST 26828-86: Instrumentation and machine building products. Marking
GOST 28198-89: Basic environmental testing. Part 1. General and quidance
GOST 28199-89: Basic environmental, testing procedures. Part 2. Tests. Test A: Cold
GOST 28200-89: Basic environmental testing procedures. Part 2. Tests. Test B: Dry heat
GOST 28203-89: Basic environmental testing procedures. Part 2. Tests. Test Fc and guidance: Vibration ( sinusoidal )
GOST 28594-90: Domestic radioelectronic equipment
GOST 30109-94: Wooden doors. Test methods for the breaking resistance
GOST 30296-95: General purpose equipment designed for determination of key parameters of vibration processes
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 7502-98: Measuring metal tapes. Specifications
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST ISO 5348-2002: Vibration and shock. Mechanical mounting of accelerometers
GOST ISO 8041-2006: Vibration. Human response to vibration. Measuring instrumentation
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50009-2000: Electromagnetic compatibility of technical equipment. Components of intruder alarm systems. Requirement and test methods
GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General
GOST R 50862-2005: Safes and strong rooms. Requirements and methods of tests for resistance to burglary and fire
GOST R 51242-98: Mechanical protective constructions and electromechanical protective constructions for doorways and windows ventings. Technical requirements and test methods for breaking resistance
GOST R 52161.1-2004: Safety of household and similar electrical appliances. Part 1. General requirements
GOST R 52435-2005: Technical means of intruder alarm systems. Classification. General technical requirements and test methods
GOST R 52437-2005: Equipment for bank protection. Deposit and personal safes. General specifications
GOST R 52551-2006: Guard and security systems. Terms and definitions
GOST R 52892-2007: Vibration and shock. Vibration of buildings. Measurement of vibration and evaluation of its effects on structure
GOST R 52931-2008: Instruments for process monitoring and control. General specifications
GOST R 53188.1-2008: Sound level meters. Part 1. Technical requirements
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R IEC 60065-2005: Audio, video and similar electronic apparatus. Safety requirements
GOST R IEC 60065-2009: Audio, video and similar electronic apparatus. Safety requirements
GOST R IEC 60068-2-1-2009: Environmental testing. Part 2-1.Tests. Test A: Cold
GOST R IEC 60068-2-2-2009: Environmental testing. Part 2-2. Tests. Test B: Dry heat
GOST R ISO 10012-2008: Enterprise management. Measurement management systems. Requirements for measurement processes and measuring equipment
GOST R ISO 16063-1-2009: Mechanical vibration. Methods for the calibration of vibration and shock transducers. Part 1. Basic concepts
GOST R ISO 22742-2006: Automatic identification. Bar coding. Linear bar code and two dimensional symbols for product packaging
GOST R ISO 7619-2-2009: Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 2. IRHD pocket meter method of measurement
GOST R ISO 9001-2008: Quality management systems. Requirements
GOST R ISO/IEC 17025-2006: General requirements for the competence of testing and calibration laboratories
GOST R ISO/TR 8550-1-2007: Statistical methods. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Part 1. General requirements
GOST R ISO/TS 10811-1-2007: Vibration and shock. Vibration in buildings with sensitive equipment. Part 1. Measurement and evaluation
GOST R ISO/TS 10811-2-2007: Vibration and shock. Vibration in buildings with sensitive equipment. Part 2. Classification
RD 78.36.003-2002/MVD Rossii: Engineering and technical strength. Security equipment. Requirements and design standards for the protection of objects from criminal attacks
SN 2.2.4/2.1.8.566-96: Industrial vibration. Vibration in premises of residential and public buildings
VNP 001-01: Industry-Specific Design Standards. Buildings for Territorial Main Administrations, National Banks, and Clearing Centers of the Russian Federation Central Bank
The Document is Referenced By:
GOST R 50776-95: Alarm systems. Part 1. General requirements. Section 4. Code of practice
GOST R 52435-2015: Alarm intruder technical means. Classification. General technical requirements and test methods
GOST R 56102.2-2015: Centralized security monitoring systems. Part 2. Subsystem for mounting at protected facility. General technical requirements and test methods
GOST R 56677-2015: Means of physical protection engineering. Coding, identification and marking. General requirements
GOST R 57788-2017: Protective blocks for windows and doors in protected premises. General specifications
R 069-2017: Recommendations on the selection and use of penetration detection tools, depending on the degree of importance and danger of protected objects
R 076-2018: Guidelines. False alarms of technical means of security alarms and methods of dealing with them
R 081-2019: Guidelines. The selection and use of technical means of protection to protect the cultural heritage of the Russian Federation from criminal attacks
R 084-2019: Requirements for the functional properties of technical security equipment at facilities subject to mandatory protection by the troops of the National Guard of the Russian Federation and the rules for their mandatory confirmation of compliance with the established technical requirements
R 78.36.018-2011: Safety guide on nuclear energy use. Unified control procedures of base materials (semi-products), weld joints and build-ups of equipment and pipelines of nuclear energy plants. Dye penetrant inspection.
R 78.36.028-2012: Technical devices for intrusion and threat detection of various types. Peculiarities of choice, operation and use depending on the degree of importance and hazard of the facilities
R 78.36.035-2013: Recommendations for the organization of a comprehensive centralized protection of banking self-service devices
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
