GOST R ISO 15534-2-2011
ГОСТ Р ИСО 15534-2-2011
|
|
Ergonomic design for the safety of machinery. Part 2. Principles for determining the dimensions of access openings
Эргономическое проектирование машин для обеспечения безопасности. Часть 2. Принципы определения размеров отверстий доступа
Status: Not effective - Superseded. Registration information 1587-st dated 02.11.2016 (official website of Rosstandart); IUS 4-2017
This standard establishes the size of access holes in cars in accordance with ISO / TR 12100-1. ISO 15534-3 lists the required dimensions of the human body with free access. This standard has been prepared mainly for fixed vehicles; for moving machines special additional requirements may be established. The sizes of the access holes are calculated based on the values of the 95th or 99th percentile of the expected user population, and the reach distances are calculated based on the values of the 5th percentile. In each case, the least favorable body size of the expected user population was used. The same considerations were applied to the location of the access holes. The anthropometric data given in ISO 15534-3 are based on the results of static measurements of naked people and do not take into account the possibility of movement, the presence of clothing, the use of equipment and the operating conditions of the machine or the environmental conditions. This standard provides ways to account for the above additional factors by increasing the anthropometric data by the corresponding allowances. Dangerous situations for people to be prevented are separately addressed in ISO 13852
Настоящий стандарт устанавливает размеры отверстий доступа в машины в соответствии с ISO/TR 12100-1. В ИСО 15534-3 приведены необходимые размеры человеческого тела с учетом свободного доступа. Настоящий стандарт был подготовлен в основном для неподвижных машин; для движущихся машин могут быть установлены особые дополнительные требования. Размеры отверстий доступа рассчитаны исходя из значений 95-й или 99-й процентилей ожидаемой совокупности пользователей, а расстояния досягаемости рассчитаны исходя из значений 5-й процентили. В каждом случае был использован наименее благоприятный размер тела ожидаемой совокупности пользователей. Те же соображения были применены и к расположению отверстий доступа. Антропометрические данные, приведенные в ИСО 15534-3, основаны на результатах статических измерений обнаженных людей и не учитывают возможность движений, наличие одежды, использование оборудования и условия эксплуатации машины или условия окружающей среды. В настоящем стандарте приведены способы учета вышеназванных дополнительных факторов путем увеличения антропометрических данных на соответствующие припуски. Опасные для людей ситуации, которые должны быть предотвращены, отдельно рассмотрены в ИСО 13852
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/24/2011
SKU: RUSS68868
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
7 Psychophysiology and ergonomics »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.180 Ergonomics »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.180 Ergonomics »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Electronic engineering, electronics and communications »
E6 Electronic computing machines, devices and equipment for them »
E65 Devices for electronic computers »
The Document is Replaced With:
GOST R ISO 15534-2-2016: Ergonomic design for the safety of machinery. Part 2. Principles for determining the dimensions of access openings
The Document References:
GOST R ISO 12100-1-2007: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terminology, methodology
GOST R ISO 15534-3-2007: Ergonomic design for the safety of machinery. Part 3. Anthropometric data
The Document is Referenced By:
GOST R ISO 22734-1-2013: Hydrogen generators using water electrolysis process. Part 1. Industrial and commercial applications
GOST R ISO 22734-2-2014: Hydrogen generators using water electrolysis process. Part 2. Residential applications
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
