Hot-rolled steel strip. Dimensions
Полоса стальная горячекатаная. Сортамент
Status: Not effective - Superseded
The standard applies to steel hot-rolled strip of general purpose and steel strip for nuts with a width of 11 to 200 mm and thickness from 4 to 60 mm.
Стандарт распространяется на стальную горячекатаную полосу общего назначения и стальную полосу для гаек шириной от 11 до 200 мм и толщиной от 4 до 60 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
10/12/1976
SKU: RUSS68981
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.50 Steel sheet products and semi-finished products »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.50 Steel sheet products and semi-finished products »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V2 Carbon steel of ordinary quality (ordinary stock) »
V23 Sheets and Stripes »
The Document is Replaced With:
GOST 103-2006: Hot-rolled steel strips. Dimensions
As a Replacement Of:
GOST 103-57: Steel rolling strip. Range
The Document is Referenced By:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 103-2006: Hot-rolled steel strips. Dimensions
GOST 10403-80: Constructional steel trowels. Technical requirements
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 12.2.042-91: Occupational safety standards system. Machines and technological equipment for livestock raising and forage production.
GOST 13568-75: Power transmission
GOST 13950-91: Welded and folded steel barrels
GOST 1435-74: Non-alloyed tool steel. Specification
GOST 1435-90: Unalloyed tool steel bars, strips and coils
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14857-76: Protection circuits from dangerous voltages and currents arising at lines of wire broadcasting. General requirements and rules
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 16341-70: Support holder for a 4000 kg force rolling head. Construction and dimensions
GOST 17129-71: Rectangular weld moulding boxes of cast steel elements having inside dimensions: length from 600 to 900 mm, width from 500 to 700 mm, height from 125 to 400 mm. Construction and dimensions
GOST 17130-71: Rectangular weld moulding boxes of cast steel elements having inside dimensions: length from 900 to 1200 mm, width 700; 800 mm, height from 150 to 400 mm. Construction and dimensions
GOST 17131-71: Rectangular weld moulding boxes of cast steel elements having inside dimensions: length from 1000 to 1200 mm, width 700; 800 mm, height 450; 500 mm. Construction and dimensions
GOST 17327-88: Bread baking forms. Specifications
GOST 17327-95: Bread baking forms
GOST 17366-80: Welded thick-walled steel barrels for chemical products
GOST 18128-82: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 18896-73: Steel thick-walled drums for chemical products. Specifications
GOST 19259-73: Cutter for ceramic tiles
GOST 19281-73: Low alloyed sorted and shaped steel
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 2.109-73: Unified system for design documentation. Basic requirements for drawings
GOST 20072-74: Heat-resistant steel
GOST 20804-81: Profiles bent and stripes perforated of steel for wiring. General specifications
GOST 21.501-93: System of design documents for construction. Rules for execution of architectural and construction working drawings
GOST 21028-75: Jigs for machining holes of moulding boxes and pattern plates. Specifications
GOST 21509-76: Reinforced concrete shoots for irrigation systems. Specifications
GOST 21546-88: Hammer dies for die forging
GOST 22930-87: Prestressed reinforced concrete slabs for irrigation canal lining of melioration systems. Specifications
GOST 23121-78: Steel crane-runway beams for general-purpose overhead travelling electric cranes of 50 t load-carrying capacity
GOST 23157-78: Inserted washers for concrete ties. Specifications
GOST 24140-80: Pipe-line fastening parts. Cramps and clamps. Specifications
GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions
GOST 25912.3-83: Prestressed reinforced concrete slabs for aerodrome pavement. Design of reinforcing and assembly-butt products
GOST 25912.4-91: Structure fittings and mountings products of reinforced concrete slabs for aerodrome pavement. Construction
GOST 26155-84: Barrels from corrosion-resistant steel
GOST 26251-84: Galvanium anodes for corrosion protection. Specifications
GOST 26919-86: Reinforced concrete window boards for residential, civil and auxiliary buildings. Specification
GOST 28186-89: Brake shoes for motor car of rolling stock. Specifications
GOST 30249-97: Cast iron brake blocks for locomotives. Specifications
GOST 30765-2001: Metal transport packagings. General specifications
GOST 4543-71: Structural alloyed steel
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5521-86: Weldable steel for shipbuilding
GOST 5521-93: Shipbuilding rolled steel
GOST 5799-78: Flasks for paints and varnishes. Specifications
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 6247-79: Steel welded barrels with rolling hoops on the shell
GOST 6713-75: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 7623-75: Outdoor drainage pipes
GOST 7623-84: Outdoor drainage pipes. Specification
GOST 801-78: Bearing steel. Specifications
GOST 8717.1-84: Reinforced concrete and concrete steps. Structure and dimensions
GOST 9074-85: Joined by pins slot cloths
GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
M788-1073: Electrical Construction Documents. General Requirements and Guidelines on Composition and Format
MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3
MI 1069-85: State system for ensuring uniformity of measurements. Methodical instructions. Machine-oriented data recording system for metals (alloys)
MR 21.01-95: Methodological recommendations for drawing up a specification on equipment, items and materials (with account for new requirements of spds standards)
ONTP 16-86: All-Union standards for technological design of thermal areas, workshops, production facilities of enterprises of mechanical engineering, instrument engineering and metalworking
OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.
OST 153-34.0-1000-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Threaded with clutch. Design and dimensions
OST 153-34.0-1000-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Threaded drafts with coupling. Design and dimensions.
OST 153-34.0-1001-99A: Assembly units and suspension parts for nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension mounting block. Design and dimensions
OST 153-34.0-1001-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Block of hang fastening. Design and dimensions.
OST 153-34.0-977-99A: Assembly units and support parts for station piping of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Plates guides. Design and dimensions
OST 153-34.0-977-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The guide rail plates. Design and dimensions.
OST 153-34.0-986-99A: Assembly units and suspension parts for nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension unit clamp for horizontal pipelines. Design and dimensions
OST 153-34.0-986-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Saddle block of a hang for horizontal pipelines. Design and dimensions.
OST 153-34.0-991-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block with an earring. Design and dimensions
OST 153-34.0-991-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. The hang block with a clip. Design and dimensions.
OST 26-07-2027-80: Symbols of materials in the design documentation.
OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.
OST 34-10-474-89: Captivating welded and casted plates for turbo-units. Constant lining. Design and dimensions.
OST 34-10-730-93: Suspension unit with eye bar. Design and dimensions.
OST 34-10-735-93: Clip for horizontal pipelines. Design and dimensions.
OST 34-10-737-93: Supporting beams. Design and dimensions.
OST 34-10-739-93: Threaded rods with coupling. Design and dimensions.
OST 34-10-740-93: Units of spring attachment. Design and dimensions.
OST 34-10-743-93: Spring unit. Design and dimensions.
OST 34-10-747-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-42-353-77: Rolled ferrous metals and pipes for the manufacture of boiler auxiliary equipment and pipelines. Limit Assortment
OST 34-42-506-80: Details and components of APP pipelines, P≤4 MPa (40 kg/cm2). Welded connections for orifice plates, Dy from 150 to 1200 mm. Construction and dimensions.
OST 34-42-658-84: Parts and assembly units of NPP pipelines Rwork <2.2 MPa (22 kgf/cm2) T ≤ 350 ° C. Pipes and stock. Assortment.
OST 34-42-747-85: Details and prefabricated units of TPS pipelines, working P<2.2 MPa (22 kg/cm2), t ≤545 °C. Pipes and rolling. Pipe grades.
OST 34-72-645-83: Steel structures of pylons with voltage of 0.38-35 kV. General Specifications.
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
OST 3-98-80: Constructional and spring refining steel. Technical requirements.
PGVU 090-93: Dust-gas and air pipelines of thermal power plants. General technical requirements
R 18-76/NIIZhB: Recommendations for determining the flatness and non-perpendicularity of the faces of control samples of concrete
R 50-116-90: Recommendations. Hot rolled steel and bent rolled steel profiles. Unified profile mix
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 24.030.142-88: Methodological instructions. Selection of steel products for construction of stationary boilers.
RD 31.44.06-89: Low loader semi-trailers. Repair Specifications
RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.
RD 34.10.351: Specified Quantity Allowances for Materials for Repair of Turbine Generators
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
RM 4-150-92: Process automation systems. Integrated norms of consumption of materials and products
RM 4-206-95: Automation systems. Specification of equipment, products and materials. Directions for implementation. Allowance to GOST 21.110-95
RM 4-223-89: Industrial Automation Systems. Execution Requirements for Electrical Installations for Automation Systems for Explosion Hazardous Areas
RM 4-249-91: Process automation systems. Device grounding networks. Allowance for the BCH 205-84/MMSS USSR
RM4-224-89: Process automation system. Requirements for performance of electric installations of automation systems in fire-hazardous zones
RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
RU 34-1203-71: Guidelines for the design of dust and air ducts of boiler units
Series 1.132.1-13pv: External wall panels lightweight concrete single-layer single-row cutting for large-panel residential buildings with a step of transverse walls of 3.0; 3.6 m and a floor height of 2.8 m (unified for difficult construction conditions: unevenly compressible soils, subsidence soils, undermined areas)
Series 1.132.1-13pv: Issue 0. Materials for design. Instructions for the manufacture of panels. Panel Assemblies
Series 1.132.1-13pv: Issue 1. One-step panels. Working drawings
Series 1.132.1-13pv: Issue 2. The panels are two-step. Working drawings
Series 1.132.1-13pv: Issue 3. Reinforcing and embedded products. Working drawings
Series 1.800.9-8: Enclosures made of metal three-layer panels for buildings of seed potato storage with a capacity of 1 thousand tons, vegetable stores with a capacity of 3 thousand tons and fruit storage with a capacity of 1 thousand tons
Series 1.800.9-8: Issue 0. Directions for use. Nodes Working drawings
Series 1.800.9-8: Issue 1. Panels, components. Working drawings
SNiP II-26-76: Roofing
ST RK 1643-2007: Freight cars cast iron brake shoes. Specification
ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation
TU 102-190-78: Aluminum frame panels for walls of heated industrial buildings
TU 102-300-81: Weights prefabricated reinforced concrete covering type UBO
TU 102-357-83: Three-layer steel wall panels with mineral wool insulation for block boxes and blocks
TU 102-464-88: Three-layer aluminum frame wall panels with mineral wool insulation
TU 102-488-95: Connecting parts and nodes of trunk pipelines on RR up to 10 MPa (100 kgf / cm2)
TU 1469-001-53597015-01: Rings for guides for the transition of steel pipelines through roads and railways, laid in a protective casing (case)
TU 1469-006-00153229-2001: Parts connecting on Рр up to 16 MPa (160 kgf
TU 2531-002-53597015-01: Face seal (rubber cuff) to protect the annular space at the junctions of main pipelines under roads and railways
TU 36-16-22-23-88: Limestone-Silica Lining Panels with Protective Layer (PFI, PFIm)
TU 3680-001-04698606-04: Pipe Support
VSN 286-90: Guidelines for the calculation of reinforced concrete chimneys
VSN 438-83: General Specified Quantity Allowances for Building Materials. Compendium 22: Thermal Insulating Operations
VSN 464-85: General Specified Quantity Allowances for Building Materials. Compendium 20: Installation of Industrial Ventilating Systems
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
